Space-time finite elements for a simplified thermo-metallurgical problem relevant to casting

The non-linear thermo-metallurgical problem, relevant for the cooling of a molten metal including the macro-segregation that occurs during the cooling process, is studied here. Due to the strong non-linearities involved in phase transformations, it is necessary to use a fine resolution in space-time in a finite element approximation in order to meet accuracy requirements. We derive space-time FE-methods based on the discontinuous and continuous Galerkin method in time for the energy equation. This formulation integrates the stored energy exactly for a given heat flux. When macro-segregation is incorporated into the model, the problem can be formulated in such a way that the phase-transition drives a flow of species. In addition, diffusion is possible throughout the domain. The model can be further rewritten using a potential approach. By this approach for modelling macro-segregation, we are able to obtain discretizations that guarantee that the balance equations are satisfied, and it is possible to solve the phase-transition problem either as a field problem or as a local problem (defined by a local evolution rule).     

Rapid thermal chemical vapor deposition of in-situ boron doped polycrystalline SIxGe1-x

In-situ doped polycrystalline Si_xGe_1-x (x = 0.7) alloys were deposited by rapid thermal chemical vapor deposition (RTCVD) using the reactive gases SiH₂Cl₂, GeH₄ and B₂H₆ in a H₂ carrier gas. The depositions were performed at a total pressure of 4.0 Torr and at temperatures 600° C, 650° C and 700° C and different B₂H₆ flow rates. The conditions were chosen to achieve high doping levels in the deposited films. Our results indicate negligible effect of B₂H₆ flow on the deposition rate. The depositions follow an Arrhenius type behavior with an activation energy of 25 kcal/mole. Boron incorporation in the films was found to follow a simple kinetic model with higher boron levels at lower deposition rates and higher B₂H₆ flow rates. As-deposited resistivities as low as 2 mΩ-cm were obtained. Rapid thermal annealing (RTA) in the temperature range 800-1000° C was found to reduce the resistivity only marginally due to the high levels of boron activation achieved during the deposition process. The results indicate that polycrystalline Si_xGe_1-x films can be deposited by RTCVD with resistivities comparable to those reported for in-situ doped polysilicon.     

Vergleich der Extrakte und des Lignins aus frischem und gelagertem Kiefernholz (Pinus sylvestris L.)

The degradation processes of the extractives of pine wood caused by aging are only noticeable in the heartwood. In seasoned sapwood the percentages of the water extracts and the cyclohexane-ethanol extract increase compared with the green sample; the alkali extracts, however, do not vary. The contents of acid lignin as well as the UV and IR spectra of MWL do not show differences. The amount of OCH₃/C₉ is in all samples 0.96, but the degree of oxidation is higher in the seasoned wood than in the green one.     

Autothermal two-stage gasification of low-density waste-derived fuels

In order to increase the efficiency of waste utilization in thermal conversion processes, pre-treatment is advantageous. With the Herhof Stabilat^® process, residual domestic waste is upgraded to waste-derived fuel by means of biological drying and mechanical separation of inerts and metals. The dried and homogenized waste-derived Stabilat^® fuel has a relatively high calorific value and contains high volatile matter which makes it suitable for gasification. As a result of extensive mechanical treatment, the Stabilat^® produced is of a fluffy appearance with a low density. A two-stage gasifier, based on a parallel-arranged bubbling fluidized bed and a fixed bed reactor, has been developed to convert Stabilat^® into hydrogen-rich product gas. This paper focuses on the design and construction of the configured laboratory-scale gasifier and experience with its operation. The processing of low-density fluffy waste-derived fuel using small-scale equipment demands special technical solutions for the core components as well as for the peripheral equipment. These are discussed here. The operating results of Stabilat^® gasification are also presented.     

Viscoelasticity of oxidized starch/low methoxy pectin mixtures in the presence of glucose syrup

The structural properties of mixtures of pectin, oxidized starch and glucose syrup were investigated using small deformation dynamic oscillation. In the absence of added calcium, preparations of low methoxy pectin with glucose syrup formed viscous solutions, which remained crystal-free at subzero temperatures. Samples of oxidized starch and glucose syrup, on the other hand, exhibited solid-like behaviour because of the crystalline nature of the amylose-like helices. Mixtures of the two polysaccharides with the co-solute clearly showed phase inversion from liquid to solid-like behaviour with increasing amounts of starch in the formulation. The transformation was reflected in the textural properties of samples, which varied from thick solutions to firm gels. The viscoelasticity of the system was modified further by the introduction of high methoxy pectin. Preparations of high methoxy pectin and glucose syrup formed rubbery gels whose amorphous nature underwent a glass transition during cooling.     

Microscopic Origin of Casimir-Polder Forces

We establish a general relation between dispersion forces. First, based on QED in causal media, leading-order perturbation theory is used to express both the single-atom Casimir-Polder and the two-atom van der Waals potentials in terms of the atomic polarizabilities and the Green tensor for the body-assisted electromagnetic field. Endowed with this geometry-independent framework, we then employ the Born expansion of the Green tensor together with the Clausius-Mosotti relation to prove that the macroscopic Casimir-Polder potential of an atom in the presence of dielectric bodies is due to an infinite sum of its microscopic many-atom van der Waals interactions with the atoms comprising the bodies. This theorem holds for inhomogeneous, dispersing, and absorbing bodies of arbitrary shapes and arbitrary atomic composition on an arbitrary background of additional magnetodielectric bodies.     

XML-Schema

XML hat sich als Sprache zur Definition von Dokumenten für den universellen Datenaustausch etabliert. XML-Schema erm?glicht ausgefeilte Definitionen für XML-Dokumente und hat beste Chancen, die bisher eingesetzte DTD abzul?sen. Neben einer allgemeinen Einführung geht dieser Beitrag auch auf verfügbare Produkte und neue M?glichkeiten der objektorientierten Softwareentwicklung mit XML-Schema ein. Vorschl?ge an Prof. Dr. Frank Puppe <puppe@informatik.uni-wuerzburg.de> oder Dieter Steinbauer <dieter.steinbauer@schufa.de> Alle „Aktuellen Schlagw?rter” seit 1988 finden Sie unter: www.ai-wuerzburg.de/as     

Computer-aided design in mechanisms

The man-machine dialog is very important for the design process. In this paper a program system, based on the minicomputer KRS 4201 (ROBOTRON), is demonstrated by using an interactive graphical screen. This program system provides the opportunity to analyze and synthesize mechanisms up to 16 links. The application is demonstrated by designing a front-loader-system for a truck. Real-time animation of seven-bar linkages and coupler curves, including velocity and acceleration, are shown.     

Co-carbonization of hard coals and coal extracts 2. The co-carbonization of medium- and high-rank coals with extracts

Studies on the influence of anthracene coal extracts on the carbonization process of medium- and high-rank coals were undertaken. Extracts from flame coal (Int. Class. 900) and gas-coking coal (Int. Class. 632) were used as additives. The blends prepared from the examined coals and the extracts exhibited better coking properties than the parent coals. The addition of extract to the coals gave an increase in the microstrength of the resultant cokes. The effects of co-carbonization of coking coals with extracts were increases in the size of the optical texture as well as in the degree of structural ordering of cokes. In the co-carbonization of semicoking coal with addition of coal extracts, a reduction in the size of the anisotropic units and a decrease in the crystallite height of cokes were observed. No modification of the basic anisotropy of coke from anthracite by coal extract was observed. With increasing extract content in anthracite/extract blends there was an increase in the degree of structural ordering of co-carbonization products. Extract addition was unable to modify the behaviour of fusinite. Based on the results of investigation of the influence of coal extracts on the carbonization of different-rank coals, a division of coals according to the modification of the optical texture of coke is given.