Biotransformation of Waste Bile Acids: A New Possible Sustainable Approach to Anti-Fungal Molecules for Crop Plant Bioprotection?

Phytopathogenic fungi are among the main causes of productivity losses in agriculture. To date, synthetic chemical pesticides, such as hydroxyanilides, anilinopyrimidines and azole derivatives, represent the main treatment tools for crop plant defence. However, the large and uncontrolled use of these substances has evidenced several side effects, namely the resistance to treatments, environmental damage and human health risks. The general trend is to replace chemicals with natural molecules in order to reduce these side effects. Moreover, the valorisation of agri-food industry by-products through biotransformation processes represents a sustainable alternative to chemical synthesis in several sectors. This research is aimed at comparing the anti-phytopathogenic activity of waste bovine and porcine bile with secosteroids obtained by biotransformation of bile acids with Rhodococcus strains. The ultimate goal is to apply these natural products on food crops affected by phytopathogenic fungi.     

Electroporation-Induced Cell Modifications Detected with THz Time-Domain Spectroscopy

Electroporation (electropermeabilization) increases the electrical conductivity of biological cell membranes and lowers transport barriers for normally impermeant materials. Molecular simulations suggest that electroporation begins with the reorganization of water and lipid head group dipoles in the phospholipid bilayer interface, driven by an externally applied electric field, and the evolution of the resulting defects into water-filled, lipid pores. The interior of the electroporated membrane thus contains water, which should provide a signature for detection of the electropermeabilized state. In this feasibility study, we use THz time-domain spectroscopy, a powerful tool for investigating biomolecular systems and their interactions with water, to detect electroporation in human cells subjected to permeabilizing pulsed electric fields (PEFs). The time-domain response of electroporated human monocytes was acquired with a commercial THz, time-domain spectrometer. For each sample, frequency spectra were calculated, and the absorption coefficient and refractive index were extracted in the frequency range between 0.2 and 1.5 THz. This analysis reveals a higher absorption of THz radiation by PEF-exposed cells, with respect to sham-exposed ones, consistent with the intrusion of water into the cell through the permeabilized membrane that is presumed to be associated with electroporation.     

Nonalcoholic Fatty Liver: A Possible New Target for Type 2 Diabetes Prevention and Treatment

Non-alcoholic fatty liver disease (NAFLD) is the most common liver disorder worldwide. Several lines of evidence have indicated a pathogenic role of insulin resistance, and a strong association with type 2 diabetes (T2MD) and metabolic syndrome. Importantly, NAFLD appears to enhance the risk for T2MD, as well as worsen glycemic control and cardiovascular disease in diabetic patients. In turn, T2MD may promote NAFLD progression. The opportunity to take into account NAFLD in T2MD prevention and care has stimulated several clinical studies in which antidiabetic drugs, such as metformin, thiazolidinediones, GLP-1 analogues and DPP-4 inhibitors have been evaluated in NAFLD patients. In this review, we provide an overview of preclinical and clinical evidences on the possible efficacy of antidiabetic drugs in NAFLD treatment. Overall, available data suggest that metformin has beneficial effects on body weight reduction and metabolic parameters, with uncertain effects on liver histology, while pioglitazone may improve liver histology. Few data, mostly preclinical, are available on DPP4 inhibitors and GLP-1 analogues. The heterogeneity of these studies and the small number of patients do not allow for firm conclusions about treatment guidelines, and further randomized, controlled studies are needed.     

Hydrogen production by photoreforming of formic acid in aqueous copper/TiO2 suspensions under UV-simulated solar radiation at room temperature

A new photocatalytic system consisting of two subsystems – Cu⁰/Cl⁻/H⁺/UV_ssr and Cu^II/H⁺/TiO₂/formic acid/UV_ssr – is proposed as a tool to produce hydrogen by reforming an organic species. Formic acid is used as hole scavenger during the experimental runs. An experimental campaign is carried out to demonstrate that the systems can generate hydrogen and to assess how the generation rate depends upon experimental conditions such as copper and TiO₂ loads, chloride and proton ions, and formic acid concentrations. A strong dependence of the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem reactivity upon copper load, chloride concentration and pH is observed. The investigation on the complete system, starting from zero-valent copper, indicates that the addition of TiO₂ and formic acid to the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem does not result into any gain in terms of hydrogen produced and, renders the system totally unreactive under some conditions. On the other hand, when a complete system, starting from cupric ions, is adopted, hydrogen production is observed also for prolonged reaction times with a surplus of hydrogen production with respect to that generated by the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem with the same Cu⁰ starting load and in absence of TiO₂ and sacrificial agent.     

A 3D moisture-stress FEM analysis for time dependent problems in timber structures

This paper presents a 3D moisture-stress numerical analysis for timber structures under variable humidity and load conditions. An orthotropic viscoelastic-mechanosorptive material model is specialized on the basis of previous models. Both the constitutive model and the equations needed to describe the moisture flow across the structure are implemented into user subroutines of the Abaqus finite element code and a coupled moisture-stress analysis is performed for several types of mechanical loads and moisture changes. The presented computational approach is validated by analyzing some wood tests described in the literature and comparing the computational results with the reported experimental data.     

Design and analysis of an integrated antiresonant reflecting optical waveguide refractive-index sensor

An integrated optical waveguide refractometer, believed to be novel, is presented. The sensor is based on an antiresonant reflecting optical waveguide and uses the strong attenuation dependence on the refractive index of antiresonant cladding layers as the sensing principle. The theory and the operation of the sensor are discussed in terms of one- and two-dimensional geometry. The theoretical predictions and numerical analysis show that a versatile sensor can be realized. The design trade-offs are discussed, and the sensitivity and measurement range are presented.     

Hourly indoor radon measurements in a research house

This paper reports and discusses the behaviour of radon concentration with time in an uninhabited dwelling. The relationship between variations in radon concentrations and indoor-outdoor temperatures and wind intensity has also been discussed. Radon concentration was measured hourly in a house located at a height of 800 m in the Lombard Prealps, at the top of the Valassina valley. The wind velocity and indoor-outdoor temperatures were measured by means of a meteorological station located on the terrace of the house. The data were analysed using the LBL model for indoor-outdoor air exchange and the models for the indoor accumulation of radon due to exhalation from building materials and pressure-driven infiltrations located underground. The role of wind and indoor-outdoor temperatures were analysed. The agreement of measurements with modelling clearly demonstrates the importance of the different sources of indoor radon. As the investigation was conducted in an uninhabited house, the measurements were not affected by the behaviour of people, e.g. opening and closing of windows. Measurements of the outdoor atmospheric concentrations of (222)Rn provide an index of the atmospheric stability, the formation of thermal inversions and convective turbulence.     

Reduction of immunoreactivity of bovine beta-lactoglobulin upon combined physical and proteolytic treatment

Bovine beta-lactoglobulin was hydrolyzed with trypsin or chymotrypsin before, during and after treatment at 600 MPa and pH 6.8 for 10 min at 30, 37 and 44 degrees C. The extent of beta-lactoglobulin hydrolysis under pressure was noticeably higher than at atmospheric pressure, particularly when chymotrypsin was used. Addition of proteases at ambient pressure to previously pressure-treated beta-lactoglobulin gave only a modest increase in proteolysis with respect to the untreated protein. Products of enzyme hydrolysis under pressure were separated by reverse-phase HPLC, and were found to be different from those obtained at atmospheric pressure when chymotrypsin was used. The residual immunochemical reactivity of the products of combined pressure-enzyme treatment was assessed on the unresolved hydrolysates by ELISA tests using polyclonal and monoclonal antibodies, and on individual hydrolytic fractions by Western Blotting using sera of paediatric patients allergic to whey proteins in cow milk. The immunoreactivity of the whole hydrolysates was related to their content of residual intact beta-lactoglobulin, and no immunochemical reactivity was found for all the products of chymotrypsin hydrolysis under pressure. The results indicate that chymotrypsin effectively hydrolysed hydrophobic regions of beta-lactoglobulin that were transiently exposed during the pressure treatments and that were not accessible in the native protein or in the protein that had been previously pressure treated.     

A cyclic CCK8 analogue selective for the cholecystokinin type A receptor: design, synthesis, NMR structure and binding measurements

A cyclic CCK8 analogue, cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 (Dpr=L-2,3-diaminopropionic acid), has been designed on the basis of the NMR structure of the bimolecular complex between the N-terminal fragment of the CCK(A) receptor and its natural ligand CCK8. The conformational features of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 have been determined by NMR spectroscopy in aqueous solution and in water containing DPC-d(38) micelles (DPC=dodecylphosphocholine). The structure of the cyclic peptide in aqueous solution is found to be in a relaxed conformation, with the backbone and Dpr29 side chain atoms making a planar ring and the N-terminal tripeptide extending approximately along the plane of this ring. In DPC/water, the cyclic peptide adopts a "boat-shaped" conformation, which is more compact than that found in aqueous solution. The cyclic constraint between the Dpr29 side chain and the CCK8 carboxyl terminus (Lys34) introduces a restriction in the backbone conformational freedom. However, the interaction of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 with the micelles still plays an important role in the stabilisation of the bioactive conformation. A careful comparison of the NMR structure of the cyclic peptide in a DPC micelle aqueous solution with the structure of the rationally designed model underlines that the turn-like conformation in the Trp30-Met31 region is preserved, such that the Trp30 and Met31 side chains can adopt the proper spatial orientation to interact with the CCK(A) receptor. The binding properties of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 to the N-terminal receptor fragment have been investigated by fluorescence spectroscopy in a micellar environment. Estimates of the apparent dissociation constant, K(d), were in the range of 70-150 nM, with a mean value of 120+/-27 nM. Preliminary nuclear medicine studies on cell lines transfected with the CCK(A) receptor indicate that the sulfated-Tyr derivative of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 displaces the natural ligand with an IC(50) value of 15 microM.