3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks

In recent years, dual-cure chemistry has been exploited to realize interpenetrating networks (IPNs) that provide enhanced thermo-mechanical properties. In this contribution, photoinduced curing of (meth)acrylates is used to build the desired 3D structure, whereas the thermally triggered polymerization reaction of 2H-chromene functionalized building blocks is utilized to create the IPN. This strategy combines the advantages of traditional UV-curable monomers with high-performance thermosets. After the successful synthesis of the bispropargyl ether derivative, i.e., 4,4′-(propane-2,2-diyl)bis((ethynyloxy)benzene), its thermally induced conversion to the corresponding 2H chromene functionalized prepolymer is studied by Fourier-transform infrared spectroscopy and gel permeation chromatography. The network formation as well as the printability of various formulations containing different amounts of the thermo-curable building block is investigated. The obtained IPNs provide enhanced thermo-mechanical properties making these resins suitable for the additive manufacturing of functional 3D parts for high-performance applications.     

Investigation of injectable drospirenone organogels with regard to their rheology and comparison to non-stabilized oil-based drospirenone suspensions

The objective of this study was to evaluate organogels as potential injectable drug-delivery systems for drospirenone (DRSP). Recently, studies on organogel characterization with focus on the parenteral injection are rarely to find in the literature. DRSP organogels contained the drug suspended in medium-chain triglycerides and were stabilized by various organogelators. The DRSP organogels were assessed in comparison to non-stabilized DRSP microcrystal suspensions (MCSs). Furthermore, rheological properties of the organogels, in particular the elastic modulus (G′), the complex viscosity (η*) and the elasticity, were evaluated with respect to the long-term stability, syringeability/injectability and in vitro release. DRSP organogels showed significantly improved storage stability compared to non-stabilized MCSs with regard to sedimentation and particle growth. Furthermore, all of the DRSP organogels showed shear-thinning behavior. Thus, ejection from syringes was possible by an autoinjector using 23G needles comparable to non-stabilized MCSs. Nevertheless, DRSP organogels exhibited significantly more sustained drug release than non-stabilized MCSs most likely caused by partial recovery of the organogelator structures at 37?°C after destruction. Consequently, DRSP organogels were evaluated to be superior to conventional non-stabilized MCSs. Silica organogels, which provided the highest elasticity, moderate G' and η* and avoided most efficiently particle growth, are slightly more preferable compared to the other DRSP organogels.     

LIVING ON THE EDGE?

Housing estates, satellite cities and other formerly idealistic social housing projects are subject to certain modes of representation that often affirm the notion of centre and periphery. The analysis of two series by German photographer Tobias Zielony shot on the outskirts of Marseille, France (Quartiers Nord, 2003) and Halle, Germany (Ha Neu, 2003) shows that these representations may be challenged. By adopting a particularly individual perspective, Zielony underlines photography’s ability to inspire change in our perception of what might be marginal.     

Microfluidic Templated Multicompartment Microgels for 3D Encapsulation and Pairing of Single Cells

Controlled encapsulation and pairing of single cells within a confined 3D matrix can enable the replication of the highly ordered cellular structure of human tissues. Microgels with independently controlled compartments that can encapsulate cells within separately confined hydrogel matrices would provide precise control over the route of pairing single cells. Here, a one‐step microfluidic method is presented to generate monodisperse multicompartment microgels that can be used as a 3D matrix to pair single cells in a highly biocompatible manner. A method is presented to induce microgels formation on chip, followed by direct extraction of the microgels from oil phase, thereby avoiding prolonged exposure of the microgels to the oil. It is further demonstrated that by entrapping stem cells with niche cells within separate but adjacent compartments of the microgels, it can create complex stem cell niche microenvironments in a controlled manner, which can serve as a useful tool for the study of cell–cell interactions. This microfluidic technique represents a significant step toward high‐throughput single cells encapsulation and pairing for the study of intercellular communications at single cell level, which is of significant importance for cell biology, stem cell therapy, and tissue engineering.     

Algal biomass constituent analysis: method uncertainties and investigation of the underlying measuring chemistries

Algal biomass compositional analysis data form the basis of a large number of techno-economic process analysis models that are used to investigate and compare different processes in algal biofuels production. However, the analytical methods used to generate these data are far from standardized. This work investigated the applicability of common methods for rapid chemical analysis of biomass samples with respect to accuracy and precision. This study measured lipids, protein, carbohydrates, ash, and moisture of a single algal biomass sample at 3 institutions by 8 independent researchers over 12 separate workdays. Results show statistically significant differences in the results from a given analytical method among laboratories but not between analysts at individual laboratories, suggesting consistent training is a critical issue for empirical analytical methods. Significantly different results from multiple lipid and protein measurements were found to be due to different measurement chemistries. We identified a set of compositional analysis procedures that are in best agreement with data obtained by more advanced analytical procedures. The methods described here and used for the round robin experiment do not require specialized instrumentation, and with detailed analytical documentation, the differences between laboratories can be markedly reduced.     

A large deformation solid‐shell concept based on reduced integration with hourglass stabilization

In this paper a new eight‐node (brick) solid‐shell finite element formulation based on the concept of reduced integration with hourglass stabilization is presented. The work focuses on static problems. The starting point of the derivation is the three‐field variational functional upon which meanwhile established 3D enhanced strain concepts are based. Important additional assumptions are made to transfer the approach into a powerful solid‐shell. First of all, a Taylor expansion of the first Piola–Kirchhoff stress tensor with respect to the normal through the centre of the element is carried out. In this way the stress becomes a linear function of the shell surface co‐ordinates whereas the dependence on the thickness co‐ordinate remains non‐linear. Secondly, the Jacobian matrix is replaced by its value in the centre of the element. These two assumptions lead to a computationally efficient shell element which requires only two Gauss points in the thickness direction (and one Gauss point in the plane of the shell element). Additionally three internal element degrees‐of‐freedom have to be determined to avoid thickness locking. One important advantage of the element is the fact that a fully three‐dimensional stress state can be modelled without any modification of the constitutive law. The formulation has only displacement degrees‐of‐freedom and the geometry in the thickness direction is correctly displayed. Copyright © 2006 John Wiley & Sons, Ltd.     

Surface properties of wood and MDF after ultrasonic-assisted cutting

Surfaces created by ultrasonic-assisted cutting (UC) of beech and spruce and of medium density fibreboard (MDF) are compared to surfaces obtained by conventional linear cutting (CC) using a sharp tool. Topography is evaluated performing roughness measurements and scanning electron microscopy. No effect of UC procedure on mean roughness is found. The surface of MDF and large areas of the surfaces of the woods appear similar after UC and CC, whereas other regions show impact marks and microscopic reels produced by the periodic oscillation of the tool in UC. The wettability of surfaces produced with both wood processing techniques is similar. Surface free energy measurements indicate accelerated ageing caused by UC, probably due to heating.