Detection of the gasoline components methyl tert-butyl ether,benzene, toluene,and m-xylene using ion mobility spectrometers with a radioactive and UV ionization source

For the first time, ion mobility spectrometers (IMS) with radioactive and UV ionization sources in combination with multicapillary columns (MCCs) have been used to determine methyl tert-butyl ether (MTBE), a gasoline additive, in water and nitrogen as well as the monoaromatic compounds benzene, toluene, and m-xylene (BTX). A membrane extraction unit was set up to extract the substances from water, which is simple, effective, and easy to automate for further applications. Thus, the detection of MTBE and BTX of gasoline vapors was accomplished after a preliminary silicone membrane extraction. Two-dimensional data analyses of IMS-chromatograms allow us to separate these substances clearly according to their different retention and drift times. Method detection limits for MTBE were 2 microg/L (UV) and 30 pg/L (63Ni) in nitrogen and 20 mg/L (UV) and 1 microg/L (63Ni) in water. Rather a good reproducibility was achieved with relative standard deviations of between 2.9 and 9%. The method presented in this article has been proven to be suitable for nearly real-time monitoring as the total analysis time is less than 90 s. As an example of application, the detection of MTBE and BTX in a mixture of volatile organic compounds of pure gasoline using the 2-D IMS-chromatogram is presented.     

Algal biomass constituent analysis: method uncertainties and investigation of the underlying measuring chemistries

Algal biomass compositional analysis data form the basis of a large number of techno-economic process analysis models that are used to investigate and compare different processes in algal biofuels production. However, the analytical methods used to generate these data are far from standardized. This work investigated the applicability of common methods for rapid chemical analysis of biomass samples with respect to accuracy and precision. This study measured lipids, protein, carbohydrates, ash, and moisture of a single algal biomass sample at 3 institutions by 8 independent researchers over 12 separate workdays. Results show statistically significant differences in the results from a given analytical method among laboratories but not between analysts at individual laboratories, suggesting consistent training is a critical issue for empirical analytical methods. Significantly different results from multiple lipid and protein measurements were found to be due to different measurement chemistries. We identified a set of compositional analysis procedures that are in best agreement with data obtained by more advanced analytical procedures. The methods described here and used for the round robin experiment do not require specialized instrumentation, and with detailed analytical documentation, the differences between laboratories can be markedly reduced.     

Adaptive flexibility and maladaptive routines in selecting fast and frugal decision strategies.

Decision routines unburden the cognitive capacity of the decision maker. In changing environments, however, routines may become maladaptive. In 2 experiments with a hypothetical stock market game (n = 241), the authors tested whether decision routines tend to persist at the level of decision strategies rather than at the level of options in strategy selection. The payoff structure of the task was changed after 80 decision trials, rendering a new strategy optimal with respect to expected payoff. Whereas most participants detected the appropriate strategy at the beginning of the task, they tended to retain it even when it was no longer optimal. A hint about a possible change had only a small influence on this maladaptive routine; a monetary incentive had none. Switching to a similar but not identical task relaxed the routine, but not much. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of Powder Morphology and Chemical Composition on Metallic Foams produced by SlipReactionFoamSintering (SRFS)‐ Process

The SlipReactionFoamSintering (SRFS)‐ process is a metallurgical method to produce open‐cell metallic foams of iron based materials, steels and nickel based materials. In this process several chemical reactions take place. Through the most influential parameter, the morphology of the metallic powder, different properties of the foam can be adjusted, such as the viscosity of the slip, the cell structure and the mechanical properties. Several examples are presented in this paper. Moreover, the thermal conductivity of three foams is measured with the transient‐heat‐source‐technique.     

The neural correlates of infant and adult goal prediction: Evidence for semantic processing systems.

The sequential nature of action ensures that an individual can anticipate the conclusion of an observed action via the use of semantic rules. The semantic processing of language and action has been linked to the N400 component of the event-related potential (ERP). The authors developed an ERP paradigm in which infants and adults observed simple sequences of actions. In one condition the conclusion of the sequence was anticipated, whereas in the other condition the conclusion was not anticipated. Adults and infants at 9 months and 7 months were assessed via the same neural mechanisms—the N400 component and analysis of the theta frequency. Results indicated that adults and infants at 9 months produced N400-like responses when anticipating action conclusions. The infants at 7 months displayed no N400 component. Analysis of the theta frequency provided support for the relation between the N400 and semantic processing. This study suggests that infants at 9 months anticipate goals and use similar cognitive mechanisms to adults in this task. In addition, this result suggests that language processing may derive from understanding action in early development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The pitting potential of aluminium in halide solutions

The pitting potential U_p is an important characteristic of every pitting system. It separates the region of passivity where the metal is practically immune from the region of heavy localized corrosion attack. On the basis of our own experimental results on pitting corrosion in the aluminum/halide-system, the present paper rediscusses fundamental questions concerning the pitting potential and the pitting process in general. At or above U_p, pitting of pure aluminum in chloride solutions is the result of the combined action of single, short-life tunnelling events, which themselves propagate discontinuously. The same type of attack, to a minor extent, also occurs down to potential values 300 mV below U_p. Therefore, the pitting potential is neither a lower limit for pit nucleation nor for pit growth, but appears to be the threshold value where the inactivation of tunnels is just balanced by tunnel nucleation. Taking the direct halogenation of the aluminum surface as the decisive step involved in tunnel nucleation, the pitting potential is given by the sum of the equilibrium potential of the aluminum/aluminum halide-electrode and the overpotential necessary for an appropriate nucleation rate to gurantee stable pitting. This pitting overvoltage has been evaluated, using the nucleation concept by Volmer, to calculate tunnel nucleation rate and experimental results on the life time of single tunnels. Values of the pitting potential calculated on this basis agree well with experimental results in chloride-, bromide-and iodide solutions. Only the case of fluoride pitting is different.     

Processing of Aqueous Aluminum Nitride Suspensions with High Solid Loading

The impact of different additives on the hydrolysis of AlN powder in aqueous suspensions at room temperature was studied. The results show that citric acid and polyacrylic acid are most effective in chemically protecting AlN against hydrolysis. The protected powder is hydrophilic, which facilitates aqueous processing, and the chemical stability is retained when basic dispersing agents are added. Based on these results, the solid loading of the aqueous slurries was maximized by utilizing bimodal particle size distributions. Combining bimodal powders with the dispersants Dolapix and citric acid, colloidally stable slurries with solid loadings in excess of 50 vol% were obtained.     

Phase Equilibria and Superconducting Properties of BiSr2YCu2O7 (1212 Phase)

Phase equilibria of the quasi-quaternary system BiO_1.5–SrO-YO_1.5–CuO have been studied at a temperature of 950°C in air, with special regard to the 1212 phase. The 1212 phase reveals only very small changes in the cation ratio. Single-phase samples exist for (Bi_0.24–0.36Cu_0.42-0.55)–Sr₂Y_1.27Cu₂O _y compositions. The bismuth-rich composition of the 1212 phase is in thermodynamic equilibrium with a liquid and the 2212 phase, whereas the copper-rich composition is in equilibrium with five other phases. The influence of combined calcium and lead doping also has been studied. Exceeding the calcium saturation of the 1212 phase increases the amount of 2212 as a secondary phase. Single-phase 1212 samples do not show any superconductivity in either the as-prepared or the post-annealed state. The only compositions with bulk superconductivity are those with calcium and lead doping after annealing at a temperature of 980°C. The superconductivity is attributed to the 2212 phase crystallizing from the melt during slow cooling.