Research advances in cognitive ultra wide band radio and their application to sensor networks

The paper illustrates the novel concept of Cognitive UWB Radio, a wireless system based on UWB transmission able to self-adapt to the characteristics of the surrounding environment. First, salient features of UWB transmission are reviewed, and then, application of UWB characteristics to the problem of cognitive radio systems is discussed. Current ongoing studies and achieved results on a possible physical layer based on Prolate Spheroidal Wave Functions and consistent with the Cognitive UWB Radio paradigm are presented and analyzed, and their application to the sensor network scenario is discussed.     

Impact of Fiber Non-linearity in High Capacity WDM Systems and in Cross-Connected Backbone Networks

The rapidly increasing data traffic volumes will demand for very high transmission capacity and network nodes throughput. Wavelength division multiplexing (WDM) technology will be asked to support many channels on the same fiber, both in point-to-point links and in WDM optical networks. The transmission of a high number of wavelength channels in all these systems is a key issue. This paper analyzes this topic, in both high capacity links and optical networks, highlighting the impact of fiber non-linearity, and addressing the main source of impairments. This is done through the use of a semi-analytical model recently upgraded to account for all the contributions deriving from Kerr effects, particularly four-wave mixing and cross-phase modulation. The analysis reveals that more than one hundred of channels at 2.5 Gbit/s can be transmitted in point-to-point links whose length can span until the order of 1000 km, and 32 channels per fiber, at the previous bit rate, can be handled in WDM networks, without dispersion compensation. For a higher number of channels (e.g., 64) dispersion compensation is needed.     

新型自振荡电源转换器VK05CFL

1.技术概述 VK05CFL是一种用于驱动微型荧光灯的自振荡转换器,采用意法半导体的VIPower M3-3专利技术制造而成,允许在同一芯片上集成控制部分和电源级。电源级是一个“发射器开关”,其构成是在级联配置内放置一个双极高压复合晶体管和一个低压MOSFET,因此,在高击穿电     

Soft‐Lithographed Up‐Converted Distributed Feedback Visible Lasers Based on CdSe–CdZnS–ZnS Quantum Dots

The development of a solution‐deposited up‐converted distributed feedback laser prototype is presented. It employs a sol–gel silica/germania soft‐lithographed microcavity and CdSe–CdZnS–ZnS quantum dot/sol–gel zirconia composites as optical gain material. Characterization of the linear and nonlinear optical properties of quantum dots establishes their high absorption cross‐sections in the one‐ and two‐ photon absorption regimes to be 1 × 10^?14 cm² and 5 × 10⁴ GM, respectively. In addition, ultrafast transient absorption dynamics measurements of the graded seal quantum dots reveal that the Auger recombination lifetime is 220 ps, a value two times higher than that of the corresponding CdSe core. These factors enable the use of such quantum dots as optically pumped gain media, operating in the one‐ and two‐photon absorption regime. The incorporation of CdSe–CdZnS–ZnS quantum dots within a zirconia host matrix affords a quantum‐dot ink that can be directly deposited on our soft‐lithographed distributed feedback grating to form an all‐solution‐processed microcavity laser.     

Improved transparency in energy-based bilateral telemanipulation

In bilateral telemanipulation algorithms based on enforcing time-domain passivity, internal friction in the devices poses an additional energy drain. This can severely decrease the obtainable transparency of these algorithms when high amounts of friction are present in the slave device. Based on a model of the friction, the dissipated energy can be estimated and reclaimed inside the energy balance of the control algorithm. Extending the energy balance which is monitored, decreases the net passivity of the telemanipulation system enforced by the control algorithm, which usually enforces passivity of just the bilateral controller. Experimental results are provided that demonstrate the effectiveness of the proposed approach in increasing the obtainable transparency. As long as the physically dissipated energy is underestimated, the telemanipulation system as a whole will remain passive. Thus the guaranteed stability property of the time-domain passivity algorithm is maintained.     

Optimal design of Service Overlay Networks with economic and performance constraints

In the last years, Service Overlay Networks (SONs) have emerged as a promising means to address some of the issues (e.g. end‐to‐end QoS) affecting the current Internet and to favor the development and deployment of new value‐added Internet services. The deployment of an SON is a capital‐intensive investment, since bandwidth with certain QoS guarantees must be purchased from the individual network domains through bilateral Service Level Agreements. Thus, minimizing the economic cost of the logical end‐to‐end service delivery infrastructure is one of the key objectives for the SON provider. When a SON is aimed at end‐to‐end QoS provisioning, its topology must be designed so as to also satisfy the specific requirements of QoS‐sensitive applications. This paper deals with the problem of planning the SON topology in order to take into account both cost and QoS constraints. More specifically, the paper proposes a set of new algorithms for the design of an optimized SON topology, which minimizes the economic cost while simultaneously meeting bandwidth and delay constraints. A performance comparison among such algorithms is finally carried out. Copyright © 2009 John Wiley & Sons, Ltd.     

A novel batch-based group key management protocol applied to the Internet of Things

Many applications for ad hoc networks are based on a point-to-multipoint (multicast) communication paradigm, where a single source sends common data to many receivers, or, inversely, on a multipoint-to-point communication paradigm, where multiple sources send data to a single receiver. In such scenarios, communication can be secured by adopting a common secret key, denoted as “group key”, shared by multiple communication endpoints. In this work, we propose a novel centralized approach to efficiently distribute and manage a group key in generic ad hoc networks and Internet of Things, while reducing the computational overhead and network traffic due to group membership changes caused by users’ joins and leaves. In particular, the proposed protocol takes advantage of two possible leave strategies: (i) at a pre-determined time selected when the user joins the group or (ii) at an unpredictable time, as in the case of membership revocation. The proposed protocol is applied to two following relevant scenarios: (i) secure data aggregation in Internet of Things (IoT) and (ii) Vehicle-to-Vehicle (V2V) communications in Vehicular Ad hoc Networks (VANETs).     

Synthesis,size-dependent optoelectronic and charge transport properties of thieno(bis)imide end-substituted molecular semiconductors

The synthesis of two new thieno(bis)imide (TBI, N) end functionalized oligothiophene semiconductors is reported. In particular, trimer (NT3N) and pentamer (NT5N) have been synthesized and characterized. Two different synthetic approaches for their preparation were tested and compared namely conventional Stille cross coupling and direct arylation reaction via C–H activation. Theoretical calculations, optical and electrochemical characterization allowed us to assess the role of the π-conjugation extent, i.e., of the oligomer size on the optoelectronic properties of these materials. In both TBI ended compounds, due to the strong localization of the LUMO orbital on the TBI unit, the LUMO energy is almost insensitive to the oligomer size, this being crucial for the fine-tailoring of the energy and the distribution of the frontier orbitals. Surprisingly, despite its short size and contrarily to comparable TBI-free analogues, NT3N shows electron charge transport with mobility up to μ_N = 10⁻⁴ cm² V⁻¹ s⁻¹, while increasing the oligomer size to NT5N promotes ambipolar behavior and electroluminescence properties with mobility up to μ_N = 0.14 cm² V⁻¹ s⁻¹ and to μ_P = 10⁻⁵ cm² V⁻¹ s⁻¹.     

Comparative analysis of the outdoor performance of a dye solar cell mini‐panel for building integrated photovoltaics applications

New generation photovoltaic (PV) devices such as polymer and dye sensitized solar cells (DSC) have now reached a more mature stage of development, and among their various applications, building integrated PVs seems to have the most promising future, especially for DSC devices. This new generation technology has attracted an increasing interest because of its low cost due to the use of cheap printable materials and simple manufacturing techniques, easy production, and relatively high efficiency. As for the more consolidated PV technologies, DSCs need to be tested in real operating conditions and their performance compared with other PV technologies to put into evidence the real potential. This work presents the results of a 3 months outdoor monitoring activity performed on a DSC mini‐panel made by the Dyepower Consortium, positioned on a south oriented vertical plane together with a double junction amorphous silicon (a‐Si) device and a multi‐crystalline silicon (m‐Si) device at the ESTER station of the University of Rome Tor Vergata. Good performance of the DSC mini‐panel has been observed for this particular configuration, where the DSC energy production compares favorably with that of a‐Si and m‐Si especially at high solar angles of incidence confirming the suitability of this technology for the integration into building facades. This assumption is confirmed by the energy produced per nominal watt‐peak for the duration of the measurement campaign by the DSC that is 12% higher than that by a‐Si and only 3% lower than that by m‐Si for these operating conditions. Copyright © 2013 John Wiley & Sons, Ltd.