Enhancing the fraction of grafted polystyrene on silica hybrid nanoparticles

Polymer-grafted inorganic nanoparticles are being developed for a diverse array of applications, ranging from drug delivery to multifunctional composites. In many instances, performance of these core-shell hybrids is limited by relatively broad distributions of size and composition, as well as the presence of impurities, such as unattached polymer chains. Herein, further synthetic improvements, and associated characterization techniques, to enhance the fraction of the grafted polystyrene shell on silica hybrid nanoparticles are discussed. We found that during surface-initiated atom transfer radical polymerization (SI-ATRP) from the silica nanoparticles, thermal self-initiation of styrene produces unattached polymer chains. Size exclusion chromatography afforded a facile approach to quantify the mass of the unattached polymer, and provide a substantial refinement to estimates of chain graft density beyond traditionally-used approaches, such as thermogravimetry. This fraction of unattached polymer is still present even after post-polymerization work-up via precipitation and re-dissolution. Removal necessitates additional procedures, such as high speed centrifugation. Selection of a lower polymerization temperature, in concert with a more reactive Cu complex, significantly reduces the amount of unattached polystyrene impurity. The improved polymerization conditions and post-polymerization purification provide more refined polystyrene-grafted silica nanoparticles to clarify structure-property relationships of these core-shell hybrids.     

Broadband light-induced absorbance change in multilayer graphene

We report the ultrafast light-induced absorbance change in CVD-grown multilayer graphene. Using femtosecond pump-probe measurements in 1100-1800 nm spectral range, we revealed broadband absorbance change when the probe photon energy was higher than that of the pump photon. The observed phenomenon is interpreted in terms of the Auger recombination and impact ionization playing a significant role in the dynamics of photoexcited carriers in graphene.     

Electron beam radiation of dried fruits and nuts to reduce yeast and mold bioburden

Dried fruits and nuts make up a significant portion of the commodities traded globally, and the presence of yeasts and molds on dried fruits and nuts can be a public health risk because of the potential for exposure to toxigenic fungi. Since current postharvest treatment technologies are rather limited for dried fruits and nuts, electron beam (E-beam) radiation experiments were performed to determine the doses required to reduce the yeast and mold bioburden of raisins, walnuts, and dates. The indigenous yeast and mold bioburden on a select number of commodities sold at retail ranged from 10(2) to 10(3) CFU/g. E-beam inactivation kinetics based on the linear model suggest that the decimal reduction dose required to eliminate 90% of the microbial population (D10-value) of these indigenous fungal populations ranges from 1.09 to 1.59 kGy. Some samples, however, exhibited inactivation kinetics that were better modeled by a quadratic model. The results indicate that different commodities can contain molds and yeasts of varying resistance to ionizing radiation. It is thus essential for the dried fruit and nut industry to determine empirically the minimum E-beam dose that is capable of reducing or eliminating the bioburden of yeasts and molds in their specific commodities.     

Effectiveness of potassium lactate and sodium diacetate in combination with irradiation to control Listeria monocytogenes on frankfurters

ABSTRACT:  The use of antimicrobial ingredients in combination with irradiation is an effective antilisterial intervention strategy for ready-to-eat meat products. Microbial safety was evaluated for frankfurters formulated with 0% or 3% added potassium lactate/sodium diacetate solution and inoculated with Listeria monocytogenes before or after treatment with irradiation (0, 1.8, or 2.6 kGy). Frankfurters were stored aerobically or vacuum packaged and L. mo nocytogenes counts and APCs were determined while refrigerated. The incorporation of lactate/diacetate with or without irradiation had a strong listeriostatic effect for aerobically stored frankfurters. Outgrowth was suppressed and counts were not different from initial counts (5.2 log CFU/frank compared with 5.0 log CFU/frank); however, those without the additive increased steadily (5.4 to 9.3 log CFU/frank). Irradiation treatments alone had higher L. monocytogenes counts after 3 wk. For vacuum-packaged frankfurters, both the addition of lactate/diacetate and irradiation were effective at controlling growth after 8 wk. Large and incremental reductions in total counts were seen for irradiation treatments. Initial counts were reduced by 3 log CFU with the application of 1.8 kGy while 2.6 kGy decreased counts over 5 log CFU. These reductions were maintained throughout storage for lactate/diacetate-treated frankfurters. By 8 wk, L. monocytogenes counts on 1.8 and 2.6 kGy irradiated frankfurters without lactate/diacetate increased to 7.43 and 6.13 log CFU, respectively. Overall, lactate/diacetate retarded the outgrowth of L. monocytogenes on frankfurters throughout aerobic storage and the combination of irradiation and 3% lactate/diacetate reduced and retarded growth of L. monocytogenes , especially during the last 2 wk of vacuum-packaged storage.     

A low-jitter 125-1250-MHz process-independent and ripple-poleless0.18-μm CMOS PLL based on a sample-reset loop filter

This paper describes a low-jitter phase-locked loop (PLL) implemented in a 0.18-μm CMOS process. A sample-reset loop filter architecture is used that averages the oscillator proportional control current which provides the feedforward zero over an entire update period and hence leads to a ripple-free control signal. The ripple-free control current eliminates the need for an additional filtering pole, leading to a nearly 90° phase margin which minimizes input jitter peaking and transient locking overshoot. The PLL damping factor is made insensitive to process variations by making it dependent only upon a bandgap voltage and ratios of circuit elements. This ensures tracking between the natural frequency and the stabilizing zero. The PLL has a frequency range of 125-1250 MHz, frequency resolution better than 500 kHz, and rms jitter less than 0.9% of the oscillator period     

Shelf Life and Sensory Characteristics of Baby Spinach Subjected to Electron Beam Irradiation

Abstract: The use of ionizing radiation for the control of foodborne pathogens and extending the shelf life of fresh iceberg lettuce and fresh spinach has recently been approved by the U.S. Food and Drug Administration. The efficacy of electron beam irradiation for controlling foodborne pathogens has been reported. For this experiment, the effectiveness of electron beam irradiation on the microbiological and sensory characteristics of fresh spinach was studied. Total aerobic plate counts were reduced by 2.6 and 3.2 log CFU/g at 0.7 and 1.4 kGy, respectively. Lactic acid bacteria were reduced at both doses of e-beam but grew slowly over the 35 d of the experiment. Yeasts and molds were not reduced in samples exposed to 0.7 kGy whereas 1.4 kGy significantly reduced microbial counts. Gas compositions (O₂ and CO₂) were significantly different than controls. Oxygen levels inside the spinach sample bags decreased over time; however, O₂ levels did not drop below 1% that can induce anaerobic fermentation. CO₂ levels for all treatments increased through day 4; yet 7 d after irradiation, CO₂ level differences were not significant in both control and irradiated samples. Irradiation dose did not affect the basic tastes, aromatics, or mouth feels of fresh spinach, however; hardness attributes decreased as irradiated dose increased and slimy attributes of fresh spinach were higher in control samples compared to irradiated samples.     

An improved PSF mapping method for EPI distortion correction in human brain at ultra high field (7T)

Object  

To further improve the quality and robustness of the point-spread function (PSF) mapping method for fully automatic and accurate correction of geometric distortions in EPI at ultra high field such as 7 Tesla with high fidelity.     

An embedded optical tracking system for motion-corrected magnetic resonance imaging at 7T

Object

Prospective motion correction using data from optical tracking systems has been previously shown to reduce motion artifacts in MR imaging of the head. We evaluate a novel optical embedded tracking system.

Materials and methods

The home-built optical embedded tracking system performs image processing within a 7T scanner bore, enabling high speed tracking. Corrected and uncorrected in vivo MR volumes are acquired interleaved using a modified 3D FLASH sequence, and their image quality is assessed and compared.

Results

The latency between motion and correction of the slice position was measured to be (19?±?5)?ms, and the tracking noise has a standard deviation no greater than 10???m/0.005° during conventional MR scanning. Prospective motion correction improved the edge strength by 16?% on average, even though the volunteers were asked to remain motionless during the acquisitions.

Conclusion

Using a novel method for validating the effectiveness of in vivo prospective motion correction, we have demonstrated that prospective motion correction using motion data from the embedded tracking system considerably improved image quality.