Determination of the degree of substitution of hydrolysed octenylsuccinate-derivatised starch

Aim of the present study was to compare two methods for the determination of the degree of substitution of starch esterified with octenyl succinic anhydride (OSA). A maximum degree of substitution of 0.034 was analysed in commercial samples of hydrolysed OSA starch using a method based on acidification of the free carboxyl group of the OSA-starch molecule after its optimization. In contrast a high degree of substitution up to 0.134 was determined when analysing the same samples using a method based on saponification of the OSA groups. An interference with reducing sugars was hypothesized as possible reason and confirmed by control experiments using different reducing and non reducing low molecular weight carbohydrates.     

Water footprint of European cars: potential impacts of water consumption along automobile life cycles

Due to global increase of freshwater scarcity, knowledge about water consumption in product life cycles is important. This study analyzes water consumption and the resulting impacts of Volkswagen's car models Polo, Golf, and Passat and represents the first application of impact-oriented water footprint methods on complex industrial products. Freshwater consumption throughout the cars' life cycles is allocated to material groups and assigned to countries according to import mix shares or location of production sites. Based on these regionalized water inventories, consequences for human health, ecosystems, and resources are determined by using recently developed impact assessment methods. Water consumption along the life cycles of the three cars ranges from 52 to 83 m(3)/car, of which more than 95% is consumed in the production phase, mainly resulting from producing iron, steel, precious metals, and polymers. Results show that water consumption takes place in 43 countries worldwide and that only 10% is consumed directly at Volkswagen's production sites. Although impacts on health tend to be dominated by water consumption in South Africa and Mozambique, resulting from the production of precious metals and aluminum, consequences for ecosystems and resources are mainly caused by water consumption of material production in Europe.     

Escherichia coli O157 and non-O157 Shiga toxin-producing Escherichia coli in fecal samples of finished pigs at slaughter in Switzerland

Fecal samples from 630 slaughtered finisher pigs were examined by PCR to assess the shedding of Escherichia coli O157 (rfbE) and Shiga toxin-producing E. coli (STEC, stx). The proportion of positive samples was 7.5% for rfbE and 22% for stx. By colony hybridization, 31 E. coli O157 and 45 STEC strains were isolated, and these strains were further characterized by phenotypic and genotypic traits. Among E. coli O157 strains, 30 were sorbitol positive, 30 had an H type other than H7, and none harbored stx genes. Intimin (eae), enterohemolysin (ehxA), EAST1 (astA), and porcine A/E-associated protein (paa) were present in 10, 3, 26, and 6% of strains. Among them, one eae-gamma1-positive O157:H7 strain testing positive for ehxA and astA and two eae-alpha1-positive O157:H45 strains were classified as enteropathogenic E. coli (EPEC). The O157:H45 EPEC harbored the EAF plasmid and the bfpA gene, factors characteristic for typical EPEC. The isolated STEC strains (43 sorbitol positive) belonged to 11 O:H serotypes, including three previously reported in human STEC causing hemolytic uremic syndrome (O9:H-, O26:H-, and O103:H2). All but one strain harbored stx2e. The eae and ehxA genes, which are strongly correlated with human disease, were present in only one O103:H2 strain positive for stx1 and paa, whereas the astA gene was found more frequently (14 strains). High prevalence of STEC was found among finisher pigs, but according to the virulence factors the majority of these strains seem to be of low virulence.     

An overview of molecular stress response mechanisms in Escherichia coli contributing to survival of Shiga toxin-producing Escherichia coli during raw milk cheese production

The ability of foodborne pathogens to survive in certain foods mainly depends on stress response mechanisms. Insight into molecular properties enabling pathogenic bacteria to survive in food is valuable for improvement of the control of pathogens during food processing. Raw milk cheeses are a potential source for human infections with Shiga toxin-producing Escherichia coli (STEC). In this review, we focused on the stress response mechanisms important for allowing STEC to survive raw milk cheese production processes. The major components and regulation pathways for general, acid, osmotic, and heat shock stress responses in E. coli and the implications of these responses for the survival of STEC in raw milk cheeses are discussed.     

Biosynthetic Plasticity Enables Production of Fluorinated Aurachins

Enzyme promiscuity has important implications in the field of biocatalysis. In some cases, structural analogues of simple metabolic building blocks can be processed through entire pathways to give natural product derivatives that are not readily accessible by chemical means. In this study, we explored the plasticity of the aurachin biosynthesis pathway with regard to using fluoro- and chloroanthranilic acids, which are not abundant in the bacterial producers of these quinolone antibiotics. The incorporation rates of the tested precursor molecules disclosed a regiopreference for halogen substitution as well as steric limitations of enzymatic substrate tolerance. Three previously undescribed fluorinated aurachin derivatives were produced in preparative amounts by fermentation and structurally characterized. Furthermore, their antibacterial activities were evaluated in comparison to their natural congener aurachin D.     

Transition and flow boiling heat transfer inside a horizontal tube

Experiments on transition and flow boiling heat transfer with refrigerant R114 inside a horizontal tube were performed at bubble flow, critical heat flux and in the transition region between bubble flow and film boiling at mass fluxes between 1200 and 4000 kg/m² s and in the pressure range between 5 and 15 bar. In comparison with pool boiling bubble flow heat transfer depends essentially on the mass flow rates and on the vapor quality. The critical heat flux depends less on the temperature difference than in pool boiling heat transfer and exhibits a maximal and a minimal value as a function of the pressure. The critical heat flux increases with mass flow rate as already shown by Collier. In the region of transition boiling the heat flux over the difference between wall and saturation temperature approaches a horizontal curve. Therefore in this region an evaporator may always be operated under stable conditions and burn out does not occur.     

Synthesis and electrochemical properties of Li[Li0.07Ni0.1Co0.6Mn0.23]O2 as a possible cathode material for lithium-ion batteries

The layered Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ materials were synthesized by sol-gel method with glycine or citric acid as chelating agent. The prepared materials were characterized by means of XRD, SEM and Raman spectroscopy. Li/Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ cells were assembled and subjected to charge-discharge studies at different C rates, viz 0.2, 1, 2 and 4 C. Although the samples showed less discharge capacity at 4 C rate the fade in capacity per cycle is lesser than that of capacity fade at 0.2 C rate. The citric acid assisted sample is found to be superior in terms of discharge capacity, capacity retention rate and also in thermal stability to that of sample prepared with glycine as chelating agent.     

Identification of the Sex Pheromone of the Currant Shoot Borer Lampronia capitella

Under an artificial light:dark cycle, females of Lampronia capitella were observed calling, with extended terminal abdominal segments, during the first 2 hr of the photoperiod. Extracts of terminal abdominal segments from females elicited large electroantennographic responses from male antennae. Gas chromatography with electroantennographic detection revealed three active peaks. Based on comparison of retention times and mass spectra of synthetic standards, these compounds were identified as (Z,Z)-9,11-tetradecadienol and the corresponding acetate and aldehyde. The electroantennographic activity of the four geometric isomers of all three compounds was investigated, and the respective (Z,Z)-isomer was found to be the most active in all cases. Aldehydes generally elicited larger antennal responses than alcohols, whereas acetates were the least active compounds. A subtractive trapping assay in the field, based on a 13:26:100 micrograms mixture of (Z,Z)-9,11-tetradecadienal, (Z,Z)-9,11-tetradecadienyl acetate, and (Z,Z)-9,11-tetradecadienol confirmed that all three compounds are pheromone components. Subtraction of (Z,Z)-9,11-tetradecadienol from the blend completely eliminated its attractiveness, whereas the other two-component blends showed reduced activity. This is the first pheromone identification from the monotrysian superfamily Incurvarioidea, confirming that the common pheromones among ditrysian moths (long-chain fatty acid derivatives comprising alcohols, acetates, and aldehydes with one or more double bonds) is not an autapomorphy of Ditrysia, but a synapomorphy of the more advanced heteroneuran lineages.     

Fouling Detection in an Optically Accessible Microstructured Heat Exchanger

The application of highly effective microstructured devices in continuous production and industrial environments is frequently prone to fouling. A new method is presented to characterize fouling in these microstructures. Thermal fouling of aqueous solutions containing whey protein were used as a test system. Different fouling effects could be observed and distinguished. Integral fouling indicators, such as thermal fouling resistance and pressure drop, as conventional criteria for the occurrence of fouling were compared with direct local optical observation. Low thermal fouling resistances could be detected.     

Untersuchung von lokalen Schichtdickenverteilungen in Fluiden mithilfe der Nahinfrarot‐Bildanalyse

An online image analysis method to determine the film thickness in fluids by use of pulsed near infrared LEDs and an NIR camera was developed. This technique offers the possibility to monitor moving fluid layers. In this work the possibilities and limits of the used apparatus are demonstrated with the application example of measurement of the fluid film thickness distribution of water and glycerol in a falling film.