Transition and flow boiling heat transfer inside a horizontal tube

Experiments on transition and flow boiling heat transfer with refrigerant R114 inside a horizontal tube were performed at bubble flow, critical heat flux and in the transition region between bubble flow and film boiling at mass fluxes between 1200 and 4000 kg/m² s and in the pressure range between 5 and 15 bar. In comparison with pool boiling bubble flow heat transfer depends essentially on the mass flow rates and on the vapor quality. The critical heat flux depends less on the temperature difference than in pool boiling heat transfer and exhibits a maximal and a minimal value as a function of the pressure. The critical heat flux increases with mass flow rate as already shown by Collier. In the region of transition boiling the heat flux over the difference between wall and saturation temperature approaches a horizontal curve. Therefore in this region an evaporator may always be operated under stable conditions and burn out does not occur.     

Synthesis and electrochemical properties of Li[Li0.07Ni0.1Co0.6Mn0.23]O2 as a possible cathode material for lithium-ion batteries

The layered Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ materials were synthesized by sol-gel method with glycine or citric acid as chelating agent. The prepared materials were characterized by means of XRD, SEM and Raman spectroscopy. Li/Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ cells were assembled and subjected to charge-discharge studies at different C rates, viz 0.2, 1, 2 and 4 C. Although the samples showed less discharge capacity at 4 C rate the fade in capacity per cycle is lesser than that of capacity fade at 0.2 C rate. The citric acid assisted sample is found to be superior in terms of discharge capacity, capacity retention rate and also in thermal stability to that of sample prepared with glycine as chelating agent.     

Identification of the Sex Pheromone of the Currant Shoot Borer Lampronia capitella

Under an artificial light:dark cycle, females of Lampronia capitella were observed calling, with extended terminal abdominal segments, during the first 2 hr of the photoperiod. Extracts of terminal abdominal segments from females elicited large electroantennographic responses from male antennae. Gas chromatography with electroantennographic detection revealed three active peaks. Based on comparison of retention times and mass spectra of synthetic standards, these compounds were identified as (Z,Z)-9,11-tetradecadienol and the corresponding acetate and aldehyde. The electroantennographic activity of the four geometric isomers of all three compounds was investigated, and the respective (Z,Z)-isomer was found to be the most active in all cases. Aldehydes generally elicited larger antennal responses than alcohols, whereas acetates were the least active compounds. A subtractive trapping assay in the field, based on a 13:26:100 micrograms mixture of (Z,Z)-9,11-tetradecadienal, (Z,Z)-9,11-tetradecadienyl acetate, and (Z,Z)-9,11-tetradecadienol confirmed that all three compounds are pheromone components. Subtraction of (Z,Z)-9,11-tetradecadienol from the blend completely eliminated its attractiveness, whereas the other two-component blends showed reduced activity. This is the first pheromone identification from the monotrysian superfamily Incurvarioidea, confirming that the common pheromones among ditrysian moths (long-chain fatty acid derivatives comprising alcohols, acetates, and aldehydes with one or more double bonds) is not an autapomorphy of Ditrysia, but a synapomorphy of the more advanced heteroneuran lineages.     

7-(Dialkylamino)coumarin-4-yl]methyl-Caged Compounds as Ultrafast and Effective Long-Wavelength Phototriggers of 8-Bromo-Substituted Cyclic Nucleotides

[7-(Dimethylamino)coumarin-4-yl]methyl (DMACM) and [7-(diethylamino)coumarin-4-yl]methyl (DEACM) esters of 8-bromoadenosine 3',5'-cyclic monophosphate (8-Br-cAMP) and 8-bromoguanosine 3',5'-cyclic monophosphate (8-Br-cGMP) are described as novel caged compounds for 8-bromo-substituted cyclic nucleotides. Synthesis is accomplished by treatment of the free acids of the cyclic nucleotides with the corresponding 7(dialkylamino)-substituted 4(diazomethyl)coumarins. Irradiation of the DMACM- and DEACM-caged cyclic nucleotides with UV light stimulates the release of the cyclic nucleotides within roughly a nanosecond. The new caged compounds are resistant to hydrolysis in aqueous buffers and exhibit long-wavelength absorption properties with maxima at 400 nm, high extinction coefficients, and high quantum yields (0.15-0.31). Their favorable properties render these compounds the most efficient and rapid phototriggers of 8-bromo-substituted cyclic nucleotides known. The usefulness of the compounds for physiological studies under nondamaging light conditions was examined in HEK293 cells expressing the alpha subunit of the cyclic-nucleotide-gated (CNG) channel of cone photoreceptors (CNGA3) and of olfactory neurons (CNGA2) by using confocal laser scanning microscopy and the patch clamp technique.     

Impact of an Altered Wnt1/β-Catenin Expression on Clinicopathology and Prognosis in Clear Cell Renal Cell Carcinoma

In renal cell carcinoma (RCC), single members of the Wnt/β-catenin signaling cascade were recently identified to contribute to cancer progression. However, the role of Wnt1, one of the key ligands in β-catenin regulation, is currently unknown in RCC. Therefore, alterations of the Wnt1/β-catenin axis in clear cell RCC (ccRCC) were examined with regard to clinicopathology, overall survival (OS) and cancer specific survival (CSS). Corresponding ccRCCs and benign renal tissue were analyzed in 278 patients for Wnt1 and β-catenin expression by immunohistochemistry in tissue microarrays. Expression scores, including intensity and percentage of stained cells, were compared between normal kidney and ccRCCs. Data was categorized according to mean expression scores and correlated to tumor and patients’ characteristics. Survival was analyzed according to the Kaplan-Meier and log-rank test. Univariable and multivariable Cox proportional hazard regression models were used to explore the independent prognostic value of Wnt1 and β-catenin. In ccRCCs, high Wnt1 was associated with increased tumor diameter, stage and vascular invasion (p ≤ 0.02). High membranous β-catenin was associated with advanced stage, vascular invasion and tumor necrosis (p ≤ 0.01). Higher diameter, stage, node involvement, grade, vascular invasion and sarcomatoid differentiation (p ≤ 0.01) were found in patients with high cytoplasmic β-catenin. Patients with a high cytoplasmic β-catenin had a significantly reduced OS (hazard ratio (HR) 1.75) and CSS (HR 2.26), which was not independently associated with OS and CSS after adjustment in the multivariable model. Increased ccRCC aggressiveness was reflected by an altered Wnt1/β-catenin signaling. Cytoplasmic β-catenin was identified as the most promising candidate associated with unfavorable clinicopathology and impaired survival. Nevertheless, the shift of membranous β-catenin to the cytoplasm with a subsequently increased nuclear expression, as shown for other malignancies, could not be demonstrated to be present in ccRCC.     

Understanding the binder chemistry,microstructure, and physical properties of volcanic ash phosphate geopolymer binder

This work aims to assess the influence of the chemical composition of the binder resulting from the reaction of phosphoric acid and volcanic ash on its final characteristics. Six initial compositions of volcanic ash phosphate geopolymer with molar ratios Fe/P of 0.27, 0.5, 0.54, 0.81, 1, and 1.5 were designed by adding various dosages of phosphoric acid to volcanic ash. The results show that the hardening time increases with the decrease of molar ratios Fe/P. An excess of phosphoric acid leads to an unstable binder that is partially destroyed with the aging of the binder. The volcanic ash phosphate geopolymer with molar ratios of Fe/P = 0.5–0.54 has the optimum compressive strength (49–53 MPa at 90 days), the lowest water absorption (8.8-9.5 wt.%) as well as porosity (18–19.6 vol.%). The main binder is a porous phase of ferro-silico-aluminophosphate. Secondary phases were also identified in some mixes including ferro-aluminophosphate and magnesium phosphate.     

Substrate Profiling of Anion Methyltransferases for Promiscuous Synthesis of S-Adenosylmethionine Analogs from Haloalkanes

Biocatalytic alkylation reactions can be performed with high chemo-, regio- and stereoselectivity using S-adenosyl-l -methionine (SAM)-dependent methyltransferases (MTs) and SAM analogs. Currently, however, this methodology is limited in application due to the rather laborious protocols to access SAM analogs. It has recently been shown that halide methyltransferases (HMTs) enable synthesis and recycling of SAM analogs with readily available haloalkanes as starting material. Here we expand this work by using substrate profiling of the anion MT enzyme family to explore promiscuous SAM analog synthesis. Our study shows that anion MTs are in general very promiscuous with respect to the alkyl chain as well as the halide leaving group. Substrate profiling further suggests that promiscuous anion MTs cluster in sequence space. Next to iodoalkanes, cheaper, less toxic, and more available bromoalkanes have been converted and several haloalkanes bearing short alkyl groups, alkyl rings, and functional groups such as alkene, alkyne and aromatic moieties are accepted as substrates. Further, we applied the SAM analogs as electrophiles in enzyme-catalyzed regioselective pyrazole allylation with 3-bromopropene as starting material.     

Synthesis of Janus polyaniline–polyelectrolyte complex membrane via in situ confined polymerization

Polyelectrolyte complex (PEC) membranes prepared from poly(styrene sulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC) were modified by crossflow polymerization of aniline (ANI). The PEC membranes were used as separators in a two-compartment setup where ANI monomer and ammonium persulfate (APS) oxidant diffused through the membranes to form polyaniline (PANI). APS and ANI having different distributions throughout the membranes, the reaction led to the asymmetric polymerization of PANI on one face of each PEC membrane thus producing Janus membranes. Due to the excess PANI content, the membrane displayed distinct asymmetric electrical conductivities on each face. Interestingly, very different ANI polymerizations were obtained when nonstoichiometric PEC membranes having different molar ratio of cationic and anionic polyelectrolytes (P⁺:P^? represents PDADMAC:PSS) were used and transport of APS was fastest through the 2:1 PEC when compared to the 1:2 PEC. In all experiments, the polymerization was most intense on the ANI side of the membranes. Also, the influence of NaCl both during PEC fabrication and during polymerization was studied and found to have some effect on the solute permeability. Results showed that a higher content of PANI was formed on PEC membranes having excess P⁺ and with no NaCl added during PEC fabrication. Although X-ray diffraction confirmed the presence of PANI on both sides of each membrane, scanning electron microscopy images demonstrated that both sides of each membrane had different PANI content deposited. Electrical conductivity measurements using a four-point probe setup also showed that the PEC–PANI exhibits asymmetric electrical property on different sides. © 2021 Society of Industrial Chemistry.     

Computational spectroscopy and reaction dynamics

Physico- and bio-chemical processes on the femto- to picosecond time scale are ideally suited to be investigated with all-atom simulations. They include, amongst others, vibrational relaxation, ligand migration in sterically demanding environments (proteins, ices), or vibrational spectra. By comparing with experimental data, the results can be used to obtain an understanding of the mechanisms underlying the observations. Furthermore, most of these processes are sensitive to the intermolecular interactions. Therefore, detailed refinement of such interaction potentials is possible.