Low-power digital filtering using approximate processing

We present an algorithmic approach to the design of low-power frequency-selective digital filters based on the concepts of adaptive filtering and approximate processing. The proposed approach uses a feedback mechanism in conjunction with well-known implementation structures for finite impulse response (FIR) and infinite impulse response (IIR) digital filters. Our algorithm is designed to reduce the total switched capacitance by dynamically varying the filter order based on signal statistics. A factor of 10 reduction in power consumption over fixed-order filters is demonstrated for the filtering of speech signals     

The role of hydrogen for the long term development of sustainable energy systems—a case study for Germany

Based on different current long-term energy scenarios the paper discusses the future perspectives of hydrogen in the German energy system as a representative example for the development of sustainable energy systems. The scenario analysis offers varying outlines of the future energy system that determine the possible role of hydrogen. The paper discusses the possibilities of expanding the share of renewable energy and the resulting prospects for establishing clean hydrogen production from renewable energy sources. Emphasis is given to the questions of an ecologically efficient allocation of limited renewable energy resources that can only be assessed from a systems analysis perspective. Findings from recent studies for Germany reveal a strong competition between the direct input into the electricity system and an indirect use as fuel in the transport sector. Moreover, the analysis underlines the paramount importance of reducing energy demand as the inevitable prerequisite for any renewable energy system.     

混合信号芯片设计处理关键的转折阶段

通过简单地剪切和粘贴知识产权(IP)内核可以加快无工厂半导体公司的系统级芯片(SOC)设计。 过去十年中,涌现出大量的为系统制造商提供专用芯片(ASIC)的小型IC设计公司。这些被称为无工厂企业(因为他们将IC制造过程转交给商业芯片制造工厂),需要的启动资金较少,而且如果市场接受他们的产品的话,能够获得丰厚的回报。在大量设计工具的支持下,这些无工厂设计企业在历史悠久的大型芯片制造商,如IBM、Intel、Motorola和德州仪器公司所主导的市场中赢得了一席之地。     

Dynamics of the transient buildup of emission inNd3+-doped fiber lasers

The two-stage process of the transient buildup of emission in Nd ⁴⁺-doped fiber lasers is described both experimentally and theoretically. After switching on the pump, spontaneous emission increases first until the gain becomes sufficient to compensate for the cavity losses; the laser field then develops and reaches the steady state after more or less regular oscillations. During this second stage, an almost chaotic spiking is obtained either for high pumping rates and/or at low temperatures. The whole set of these dynamical scenarios is not described under the usual assumptions of uniform cavity losses over the whole field spectrum and of pure homogeneous broadening for the transition line, but rather a modified form of the Maxwell-Bloch equations which retains some frequency dependence for the losses in the cavity and the inhomogeneous broadening as well is proposed     

CdTe/CdS thin film solar cells grown in substrate configuration

The ability to grow efficient CdTe/CdS solar cells in substrate configuration would not only allow for the use of non‐transparent and flexible substrates but also enable a better control of junction formation. Yet, the problems of barrier formation at the back contact as well as the formation of a p–n junction with reduced recombination losses have to be solved. In this work, CdTe/CdS solar cells in substrate configuration were developed, and the results on different combinations of back contact materials are presented. The Cu content in the electrical back contact was found to be a crucial parameter for the optimal CdCl₂‐treatment procedure. For Cu‐free cells, two activation treatments were applied, whereas Cu‐containing cells were only treated once after the CdTe deposition. A recrystallization behavior of the CdTe layer upon its activation similar to superstrate configuration was found; however, no CdTe–CdS intermixing could be observed when the layers were treated consecutively. Remarkably high V_OC and fill factor of 768 mV and 68.6%, respectively, were achieved using a combination of MoO₃, Te, and Cu as back contact buffer layer resulting in 11.3% conversion efficiency. With a Cu‐free MoO₃/Te buffer material, a V_OC of 733 mV, a fill factor of 62.3%, and an efficiency of 10.0% were obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

Correcting for contact geometry in Seebeck coefficient measurements of thin film devices

Driven by promising recent results, there has been a revived interest in the thermoelectric properties of organic (semi)conductors. Concomitantly, there is a need to probe the Seebeck coefficient S of modestly conducting materials in thin film geometry. Here we show that geometries that seem desirable from a signal-to-noise perspective may induce systematic errors in the measured value of S, S_m, by a factor 3 or more. The enhancement of S_m by the device geometry is related to competing conduction paths outside the region between the electrodes. We derive a universal scaling curve that allows correcting for this and show that structuring the semiconductor is not needed for the optimal electrode configuration, being a set of narrow, parallel strips.     

Core–Shell Nanoparticle Interface and Wetting Properties

Latex colloids are among the most promising materials for broad thin film applications due to their facile surface functionalization. Yet, the effect of these colloids on chemical film and wetting properties cannot be easily evaluated. At the nanoscale, core–shell particles can deform and coalesce during thermal annealing, yielding fine‐tuned physical properties. Two different core–shell systems (soft and rigid) with identical shells but with chemically different core polymers and core sizes are investigated. The core–shell nanoparticles (NPs) are probed during thermal annealing in order to investigate their behavior as a function of nanostructure size and rigidity. X‐ray scattering allows to follow the re‐arrangement of the NPs and the structural evolution in situ during annealing. Evaluation by real‐space imaging techniques reveals a disappearance of the structural integrity and a loss of NP boundaries. The possibility to fine‐tune the wettability by tuning the core–shell NPs morphology in thin films provides a facile template methodology for repellent surfaces.     

Adhesion and Mechanical Properties of PNIPAM Microgel Films and Their Potential Use as Switchable Cell Culture Substrates

Thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) microgel films are shown to allow controlled detachment of adsorbed cells via temperature stimuli. Cell response occurs on the timescale of several minutes, is reversible, and allows for harvesting of cells in a mild fashion. The fact that microgels are attached non‐covalently allows using them on a broad variety of (charged) surfaces and is a major advantage as compared to approaches relying on covalent attachment of active films. In the following, the microgels’ physico‐chemical parameters in the adsorbed state and their changes upon temperature variation are studied in order to gain a deeper understanding of the involved phenomena. By means of atomic force microscopy (AFM), the water content, mechanical properties, and adhesion forces of the microgel films are studied as a function of temperature. The analysis shows that these properties change drastically when crossing the critical temperature of the polymer film, which is the basis of the fast cell response upon temperature changes. Furthermore, nanoscale mechanical analysis shows that the films posses a nanoscopic gradient in mechanical properties.     

Zutrittskontrolle mit Gesichtserkennung

Firmen&ProdukteDehn Austria

überspannungs-schutz in der Telekommunikation     

A Markov-Based Channel Model Algorithm for Wireless Networks

Techniques for modeling and simulating channel conditions play an essential role in understanding network protocol and application behavior. In [11], we demonstrated that inaccurate modeling using a traditional analytical model yielded suboptimal error control protocol parameters choices. In this paper, we demonstrate that time-varying effects on wireless channels result in wireless traces which exhibit non-stationary behavior over small window sizes. We then present an algorithm that extracts stationary components from a collected trace in order to provide analytical channel models that, relative to traditional approaches, more accurately represent characteristics such as burstiness, statistical distribution of errors, and packet loss processes. Our algorithm also generates artificial traces with the same statistical characteristics as actual collected network traces. For validation, we develop a channel model for the circuit-switched data service in GSM and show that it: (1) more closely approximates GSM channel characteristics than traditional Markov models and (2) generates artificial traces that closely match collected traces' statistics. Using these traces in a simulator environment enables future protocol and application testing under different controlled and repeatable conditions.