Self‐employment and local economic performance: Evidence from US counties*

This study explores the relationship between self‐employment and income growth, employment growth, and change in poverty in metro and non‐metro areas in the United States using county‐level panel data. We investigate the impact of the relative size of the self‐employment sector measured by the share of non‐farm proprietorships (NFPs) in total full and part‐time employment on three key economic performance indicators. We first estimate an income growth model to analyse the effects of self‐employment on income growth. Then we investigate the independent effects of self‐employment on employment growth and changes in family poverty rates. Our results indicate that higher self‐employment rates are associated with statistically significant increases over time in income and employment growth, and reductions in poverty rates in non‐metro counties. We find similar effects on metro county income and employment, but not on poverty dynamics.     

Metal Oxide Nanowires for Gas Sensor Applications

We report on the synthesis of SnO₂ and CuO nanowires and their application as gas sensing components. The fabrication of SnO₂ and CuO single nanowire devices by optical and electron beam lithography is described, and sensing performance to the toxic gas carbon monoxide is demonstrated. We briefly present the development of CMOS fabricated micro-hotplates as platforms for gas sensors and show our approach for nanowire implementation. Finally, we demonstrate a fully CMOS integrated CuO multi nanowire device and present our roadmap for a fully integrated multi-parameter smart sensor device which could be implemented as safety feature in smart phones.     

Market penetration analysis of electric vehicles in the German passenger car market towards 2030

There is currently intensive public discussion of fuel cell electric vehicles (FCEV) and other electric powertrains, such as battery electric vehicles (BEV), plug-in hybrid electric vehicles (PHEV) and hybridized combustion engine vehicles (HEV). In this context, the German government has set the target of one million electric vehicles on the road by 2020, and six million by 2030 [1]. The goal of this paper is to identify the possible market share of electric vehicles in the German new car fleet in three scenarios in the timeframe from 2010 to 2030. The VECTOR21 vehicle technology scenario model is used to model the fleet in three scenarios. In the reference scenario with business-as-usual parameters, 189,000 electric vehicles will be sold in Germany by 2020. Scenario two with purchase price incentives from 5000 EUR, high oil prices, and low prices for hydrogen and electricity will result in 727,000 vehicles. In the last scenario with substantial OEM mark-up reductions and external conditions as in the business-as-usual scenario, 3.28 million vehicles will be sold.     

A new enzymatically produced 1-lactulose: A pilot study to test the bifidogenic effects

In a novel pilot plant scale process, lactulose was synthesized enzymatically, operating a maximum batch volume of 170 L. The test product was subjected to a randomized, double-blind, placebo-controlled pilot feeding study. Participants consumed a milk serum drink for 14 days, equalling a daily intake of about 3 g d⁻¹ galactosyl-fructoses. Additionally, the effect of industrially produced lactulose and a placebo drink without lactulose was determined. So far, clinical studies on the prebiotic action of lactulose only focussed on the effects of industrially generated lactulose. The intake of enzymatically synthesized lactulose significantly increased (p = 0.001) faecal bifidobacterial counts, while there was no difference with industrially produced lactulose. Analysis of the compounds showed that the drink with enzymatically synthesized lactulose contained an additional disaccharide, β-1,1-galactosyl-fructose. Presumably, this sugar has a bifidogenic effect and may represent a novel prebiotic.     

Hydrierung von Diethylsuccinat zu γ‐Butyrolacton, 1,4‐Butandiol und Tetrahydrofuran

The shortage of fossil resources necessitates the search for alternative sources for the production of important bulk chemicals. Diethyl succinate derived from biobased succinic acid can be used as a renewable alternative to fossil resources for the production of γ‐butyrolactone, 1,4‐butanediol and tetrahydrofuran. Commercially available ZnO‐free copper catalysts in a fixed‐bed reactor show promising selectivity to C4 products, but 1,4‐butanediol dehydration to tetrahydrofuran occurs over acidic sites, like alumina and zirconia.     

Blast furnace slags as functional fillers on rheological,thermal, and mechanical behavior of thermoplastics

Blast furnace slags (BFS) is a secondary byproduct of iron industry, which has a combination of acidic and basic oxides and show a complex, multiphase structure. If appropriately tailored, BFS could be an effective functional filler, improving the property profile of thermoplastics such as polypropylene (PP) and polystyrene (PS). As a raw material, the proposed filler may introduce both economic and ecological advantages, as it is considered an inexpensive secondary product rather than a natural resource. The current study aims at investigating the effect of incorporating BFS as a micro‐sized filler on the rheological, thermal, and mechanical behavior of PP and PS. BFS types in this study are air‐cooled, crystalline, and amorphous, grounded types. Both types are ground into 71, 40, and 20 μm batches and introduced in 10, 20, and 30 weight fractions via melt kneading. Mixtures are then formed into 4‐mm and 2‐mm thick plates via compression molding. Slight increase in rheological factors is observed with increasing filler loading. BFS hinders the crystallization of PP, resulting in slight increase of crystallization temperatures (T_c) and lowering of crystallization enthalpy (ΔH_c). No significant effect of filler on transition temperatures (T_g) is reported. Mechanically, BFS increases the tensile modulus of PP, but decreases its strength. For PS formulations, a modest toughening effect is observed by slag filler. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43021.     

Geothermal use of an Alpine aquifer—Davos pilot study

Grundwasser - Topographically induced Alpine regional groundwater flow systems below the unconsolidated valley fillings constitute a substantial unused geothermal resource. Within the...     

Understanding the binder chemistry,microstructure, and physical properties of volcanic ash phosphate geopolymer binder

This work aims to assess the influence of the chemical composition of the binder resulting from the reaction of phosphoric acid and volcanic ash on its final characteristics. Six initial compositions of volcanic ash phosphate geopolymer with molar ratios Fe/P of 0.27, 0.5, 0.54, 0.81, 1, and 1.5 were designed by adding various dosages of phosphoric acid to volcanic ash. The results show that the hardening time increases with the decrease of molar ratios Fe/P. An excess of phosphoric acid leads to an unstable binder that is partially destroyed with the aging of the binder. The volcanic ash phosphate geopolymer with molar ratios of Fe/P = 0.5–0.54 has the optimum compressive strength (49–53 MPa at 90 days), the lowest water absorption (8.8-9.5 wt.%) as well as porosity (18–19.6 vol.%). The main binder is a porous phase of ferro-silico-aluminophosphate. Secondary phases were also identified in some mixes including ferro-aluminophosphate and magnesium phosphate.     

Aerosol Process for the In Situ Coating of Nanoparticles with a Polymer Shell

This article presents a novel method to encapsulate gas-borne nanoparticles with a polymeric shell. This method implies heterogeneous condensation of monomer vapor around the surface of nanoparticles as nuclei and polymerization is then subsequently started by addition of NH₃ as aerosol initiator. Ag and SiO₂ nanoparticles were generated as inorganic core by spark discharge and nebulization, respectively, and glycidyl methacrylate (GMA) was used as organic monomer. The effect of several parameters, including vapor pressure of monomer and properties of inorganic core such as morphology, material, particle size, and production method on the thickness of polymeric shell and morphology of resulting nanocomposites has been investigated. The particle size distribution and morphology of the resulting core-shell nanoparticles have been studied via scanning mobility particle sizer (SMPS) and transmission electron microscope (TEM). Finally, the coating efficiency was determined by aerosol photoemission (APE) and the results show that monomer and polymer coating efficiency are 99% and 60%, respectively.

Copyright 2014 American Association for Aerosol Research