Nucleate Boiling on a Single Site: Contact Angle Analysis for a Quasi-2D Growing Vapour Bubble

Heat transfer prediction under boiling condition is still unresolved. In this paper, a basic study on bubble growth is carried out. Recent works show that contact line region plays an important role for heat and mass transfer in nucleate boiling regime. Three dimension experimental set-up lead to a mirage effect which disturbs measurements. To overcome this problem, a new quasi two dimensional experimental set-up is designed. This Hele–Shaw like configuration allows measuring the contact angle and contact line displacement during the bubble growth. A noticeable behavior of the contact angle is observed, and the influence of the sub-cooling level on the bubble growth rate and the contact angle value is studied.     

Process engineering parameters and type of n-octenylsuccinate-derivatised starch affect oxidative stability of microencapsulated long chain polyunsaturated fatty acids

Aim of the present study was to investigate the impact of the emulsifying carrier matrix constituent, n-octenylsuccinate-derivatised (OSA)-starch, and process conditions on physical characteristics and oxidative stability of microencapsulated fish oil. Furthermore, the effect of the drying medium, i.e. air or nitrogen, on lipid oxidation during spray-drying and subsequent storage was investigated. Particle characteristics and lipid oxidation of microencapsulated fish oil were both influenced by the type of OSA-starch and the drying conditions. The highest oxidative stability was observed for fish oil microencapsulated in OSA-starch with the lowest average molecular weight and glucose syrup spray-dried at a moderate temperature setting. Particle characteristics of the microcapsules were not attributable for differences in lipid oxidation during storage. In spray-dried carrier matrix particles, the particle size increased with increasing average molecular weight of the OSA-starch and was attributed to an increase in air inclusion. Thus differences in lipid oxidation of the microencapsulated fish oil were attributed to differences in air inclusion as affected by the type of OSA-starch. In terms of spray-drying under inert conditions and in the presence of air, lipid oxidation of microencapsulated fish oil was rather attributed to oxygen availability in the feed emulsion than in the drying gas.     

Canonical views of dynamic scenes.

The visual recognition of dynamic scenes was examined. The authors hypothesized that the notion of canonical views, which has received strong empirical support for static objects, also holds for dynamic scenes. In Experiment 1, viewpoints orthogonal to the main axis of movement in the scene were preferred over other viewpoints, whereas viewpoints in line with the main axis were least preferred. Experiment 2 provided no empirical evidence for a recognition advantage of canonical viewpoints when presented during the initial learning phase, but Experiment 3 showed a cognitive advantage for canonical viewpoints if they were presented as test stimuli during the recognition test. Overall, the findings suggest that on a phenomenological level, viewers are consciously aware of such viewpoints, and, on a cognitive level, viewers benefit from canonical viewpoints in terms of recognition accuracy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Realistic mobility simulation of urban mesh networks

It is a truism that today’s simulations of mobile wireless networks are not realistic. In realistic simulations of urban networks, the mobility of vehicles and pedestrians is greatly influenced by the environment (e.g., the location of buildings) as well as by interaction with other nodes. For example, on a congested street or sidewalk, nodes cannot travel at their desired speed. Furthermore, the location of streets, sidewalks, hallways, etc. restricts the position of nodes, and traffic lights impact the flow of nodes. And finally, people do not wander the simulated region at random, rather, their mobility depends on whether the person is at work, at lunch, etc. In this paper, realistic simulation of mobility for urban wireless networks is addressed. In contrast to most other mobility modeling efforts, most of the aspects of the presented mobility model and model parameters are derived from surveys from urban planning and traffic engineering research. The mobility model discussed here is part of the UDel Models, a suite of tools for realistic simulation of urban wireless networks. The UDel Models simulation tools are available online.     

Nanofiber coating of surfaces for intensification of drop or spray impact cooling

A novel enhancement of drop and spray cooling for microelectronic and radiological elements and server rooms requiring extremely high heat fluxes is proposed. The key idea of the method is to cover the heat transfer surfaces with electrospun non-woven polymer nanofiber mats. The mats are permeable for water drops. The enhanced efficiency of drop cooling in the presence of nanofiber mats observed experimentally results from full elimination of receding and bouncing of the drops, characteristic of the current spray cooling technology. Therefore, the drops evaporate completely, and the large cooling potential associated with the latent heat of water evaporation is more fully exploited. This is paradoxical: the best cooling can be provided by a “fur overcoat”! The proposed cooling method alone may lead to a breakthrough in further miniaturization of microelectronic chips, optical and radiological elements and accelerate the development of a new generation of computers. In order to check the suitability of different materials for the drop and spray cooling applications, the thermal and structural properties of nanofiber mats based on four different polymers have been measured over a wide temperature range. Based on the results of these measurements, the most suitable materials have been chosen.     

Adsorption of Pb(ll) and Eu(III) by oxide minerals in the presence of natural and synthetic hydroxamate siderophores

Trihydroxamate siderophores have been proposed for use as mediators of actinide and heavy metal mobility in contaminated subsurface zones. These microbially produced ligands, common in terrestrial and marine environments, recently have been derivatized synthetically to enhance their affinity for transuranic metal cations. However, the interactions between these synthetic derivative and adsorbed trace metals have not been characterized. In this paper we compare a natural siderophore, desferrioxamine-B (DFO-B), with its actinide-specific catecholate derivative, N-(2,3-dihydroxy-4-(methylamido)benzoyl)desferrioxamine-B (DFOMTA), as to their effect on the adsorption of Pb(II) and Eu(III) by goethite and boehmite. In the presence of 240 microM DFO-B, a strongly depleting effect on Eu(III) adsorption by goethite and boehmite occurred above pH 6. By contrast, almost total removal of Eu(III) from solution in the neutral to slightly acidic pH range was observed in the presence of either 10 or 100 microM DFOMTA, due primarilyto the formation of metal-DFOMTA precipitates. Addition of DFOMTA caused an increase in Pb(II) adsorption by goethite below pH 5, but a decrease above pH 5, such that the Pb(II) adsorption edge in the presence of DFOMTA strongly resembled the DFOMTA adsorption envelope, which showed a maximum near pH 5 and decreasing adsorption toward lower and higher pH.     

Ethernet für die Feldebene

Firmen&;ProdukteSiemens A&;D, I&;S

Ethernet für die Feldebene     

All-solid-state tunable continuous-wave ultraviolet source with high spectral purity and frequency stability

We present a novel approach for the generation of higly frequency-stable, widely tunable, single-frequency cw UV light that is suitable for high-resolution spectroscopy. Sum-frequency generation (SFG) of two solid-state sources with a single cavity resonant for both fundamental waves is employed. Using a highly stable, narrow-linewidth frequency-doubled cw Nd:YAG laser as a master laser and slaving to it the SFG cavity and the other fundamental wave from a Ti:sapphire laser, we generate UV radiation of 33-mW output power around 313 nm. Alternatively, we use a diode laser instead of the Ti:sapphire laser and produce an output power of 2.1 mW at 313 nm. With both setups we obtain a continuous tunability of >15 GHz, short-term frequency fluctuations in the submegahertz range, a long-term frequency drift below 100 MHz/h, and stable operation for several hours. The theory of optimized doubly resonant SFG is also given.     

Single-Row Transformation of Complete Graphs

A complete graph is a fully-connected graph where every node is adjacent to all other nodes in the graph. Very often, many applications in science and engineering are reducible to this type of graph. Hence, a simplified form of a complete graph contributes in providing the solutions to these problems. In this paper, we present a technique for transforming a complete graph into a single-row routing problem. Single-row routing is a classical technique in the VLSI design that is known to be NP-complete. We solved this problem earlier using a method called ESSR, and, the same technique is applied to the present work to transform a complete graph into its single-row routing representation. A parallel computing model is proposed which contributes in making the problem modular and scalable. We also discuss the application of this work on the channel assignment problem in the wireless cellular telephone networks.