Crystallization of 2D Hybrid Organic–Inorganic Perovskites Templated by Conductive Substrates

2D hybrid organic–inorganic perovskites are valued in optoelectronic applications for their tunable bandgap and excellent moisture and irradiation stability. These properties stem from both the chemical composition and crystallinity of the layer formed. Defects in the lattice, impurities, and crystal grain boundaries generally introduce trap states and surface energy pinning, limiting the ultimate performance of the perovskite; hence, an in-depth understanding of the crystallization process is indispensable. Here, a kinetic and thermodynamic study of 2D perovskite layer crystallization on transparent conductive substrates are provided—fluorine-doped tin oxide and graphene. Due to markedly different surface structure and chemistry, the two substrates interact differently with the perovskite layer. A time-resolved grazing-incidence wide-angle X-ray scattering (GIWAXS) is used to monitor the crystallization on the two substrates. Molecular dynamics simulations are employed to explain the experimental data and to rationalize the perovskite layer formation. The findings assist substrate selection based on the required film morphology, revealing the structural dynamics during the crystallization process, thus helping to tackle the technological challenges of structure formation of 2D perovskites for optoelectronic devices.     

Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics

Studies on the influence of four different solvents on the morphology and photovoltaic performance of bulk‐heterojunction films made of poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) via spin‐coating for photovoltaic applications are reported. Solvent‐dependent PCBM cluster formation and P3HT crystallization during thermal annealing are investigated with optical microscopy and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) and are found to be insufficient to explain the differences in device performance. A combination of atomic force microscopy (AFM), X‐ray reflectivity (XRR), and grazing‐incidence small‐angle X‐ray scattering (GISAXS) investigations results in detailed knowledge of the inner film morphology of P3HT:PCBM films. Vertical and lateral phase separation occurs during spin‐coating and annealing, depending on the solvent used. The findings are summarized in schematics and compared with the IV characteristics. The main influence on the photovoltaic performance arises from the vertical material composition and the existence of lateral phase separation fitting to the exciton diffusion length. Absorption and photoluminescence measurements complement the structural analysis.     

激光技术在刚挠性HDI板的应用——微导通孔形成，图形成形，外型加工

概述了采用一个激光源能够加工刚性和挠性板的一种新型激光技术,PCB制造商可能采用最小的投资和提高生产率而进入HDI市场。     

Robust Fabrication of Nonstick,Noncorrosive, Conductive Graphene‐Coated Liquid Metal Droplets for Droplet‐Based,Floating Electrodes

Nontoxic liquid metals (conductive materials in a liquid state at room temperature) are an emerging class of materials for applications ranging from soft electronics and robotics to medical therapy and energy devices. Their sticky and corrosive properties, however, are becoming more of a critical concern for circuits and devices containing other metals as these are easily destroyed or contaminated by the liquid metals. Herein, a feasible method for fabricating highly conductive graphene‐coated liquid metal (GLM) droplets is reported and their application as nonstick, noncorrosive, movable, soft contacts for electrical circuits is demonstrated. The as‐prepared GLM droplets consist of a liquid‐phase soft core of liquid metal and a slippery outer layer of graphene sheets. These structures address the issue of simultaneous control of the wettability and conductivity of a soft electronic contact by combining extraordinary properties, i.e., nonstick, noncorrosive, yet exhibiting high electronic conductivity while in contact with metal substrates, e.g., Au, Cu, Ag, and Ni. As proof‐of‐concept, the as‐prepared GLM droplets are demonstrated as floating electrodes for movable, recyclable electronic soft contacts in electrical circuits.     

Accelerated development of CuSbS2 thin film photovoltaic device prototypes

Development of alternative thin film photovoltaic technologies is an important research topic because of the potential of low‐cost, high‐efficiency solar cells to produce terawatt levels of clean power. However, this development of unexplored yet promising absorbers can be hindered by complications that arise during solar cell fabrication. Here, a high‐throughput combinatorial method is applied to accelerate development of photovoltaic devices, in this case, using the novel CuSbS₂ absorber via a newly developed three‐stage self‐regulated growth process to control absorber purity and orientation. Photovoltaic performance of the absorber, using the typical substrate CuIn_xGa_{1 − x}Se₂ (CIGS) device architecture, is explored as a function of absorber quality and thickness using a variety of back contacts. This study yields CuSbS₂ device prototypes with ~1% conversion efficiency, suggesting that the optimal CuSbS₂ device fabrication parameters and contact selection criteria are quite different than for CIGS, despite the similarity of these two absorbers. The CuSbS₂ device efficiency is at present limited by low short‐circuit current because of bulk recombination related to defects, and a small open‐circuit voltage because of a theoretically predicted cliff‐type conduction band offset between CuSbS₂ and CdS. Overall, these results illustrate both the potential and limits of combinatorial methods to accelerate the development of thin film photovoltaic devices using novel absorbers. Copyright © 2016 John Wiley & Sons, Ltd.     

A Study on the Feasibility of Measuring the Emissivity with the Laser-Flash Method

The laser-flash method is a fast, widely used and well established technique to measure the thermal diffusivity. Since its introduction in the 1960s, it was proposed to expand this technique to the measurement of heat capacity and emissivity. Currently, the measurement of spectral emissivity at high temperatures is connected with relatively large uncertainties, although the spectral emissivity is an essential parameter for applications, e.g., in the lamp industry and fusion research. In this work, a theoretical study is presented on the possibility of emissivity measurements using the laser-flash method. Two mathematical approaches are discussed which solve the problem, that a measured temperature rise—necessary to calculate the emissivity—itself depends on the emissivity. It is shown that both methods have a negligible arithmetic error, making them applicable to be used in future work.     

p‐TCOs für Transparente Elektronik

p‐type TCOs for use in transparent electronics In this article, a new type of semiconducting material is introduced. Transparent conducting thin films are already established in our everydaylife. But the type of these so‐called ?TCOs”? is dominated by electron transport, that means they are n‐type. To get transparent p‐n‐junctions and therefore transparent electronics, the missing part is a transparent p‐type material. Researchers all over the world have found different approach to produce this new generation of materials. At the Fraunhofer Institute for Surface Engineering and Thin Films (IST) in Braunschweig it is now possible to produce these kind of thin films as well.     

Biosynthetic Plasticity Enables Production of Fluorinated Aurachins

Enzyme promiscuity has important implications in the field of biocatalysis. In some cases, structural analogues of simple metabolic building blocks can be processed through entire pathways to give natural product derivatives that are not readily accessible by chemical means. In this study, we explored the plasticity of the aurachin biosynthesis pathway with regard to using fluoro- and chloroanthranilic acids, which are not abundant in the bacterial producers of these quinolone antibiotics. The incorporation rates of the tested precursor molecules disclosed a regiopreference for halogen substitution as well as steric limitations of enzymatic substrate tolerance. Three previously undescribed fluorinated aurachin derivatives were produced in preparative amounts by fermentation and structurally characterized. Furthermore, their antibacterial activities were evaluated in comparison to their natural congener aurachin D.     

Transition and flow boiling heat transfer inside a horizontal tube

Experiments on transition and flow boiling heat transfer with refrigerant R114 inside a horizontal tube were performed at bubble flow, critical heat flux and in the transition region between bubble flow and film boiling at mass fluxes between 1200 and 4000 kg/m² s and in the pressure range between 5 and 15 bar. In comparison with pool boiling bubble flow heat transfer depends essentially on the mass flow rates and on the vapor quality. The critical heat flux depends less on the temperature difference than in pool boiling heat transfer and exhibits a maximal and a minimal value as a function of the pressure. The critical heat flux increases with mass flow rate as already shown by Collier. In the region of transition boiling the heat flux over the difference between wall and saturation temperature approaches a horizontal curve. Therefore in this region an evaporator may always be operated under stable conditions and burn out does not occur.