Cryptosporidium Log-inactivation with Ozone Using Effluent CT10, Geometric Mean CT10, Extended Integrated CT10 and Extended CSTR Calculations

The draft Long-Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) contains Cryptosporidium log-inactivation CT tables (ozone-in-water concentration [residual], “C” times contact time, T). Depending on water temperature, Cryptosporidium CT values that are listed are 15 to 25 times greater than CT values for equivalent Giardia log-inactivation credit. The elevated operating dose required for Cryptosporidium log-inactivation credit has the potential to increase disinfection by-product (DBP) formation (e.g., bromate). Calculating CT value accurately will minimize ozone dose, which will decrease operating cost and lower DBP formation, and at the same time maintain disinfection protection through implementation of scientifically based safety factors. Various methods are available for calculating CT value. The method chosen depends largely on the available information concerning ozone residual characteristics and hydrodynamic features of the ozone contactor, plus local regulatory requirements. Four methods are discussed in this paper. Each method can be used to calculate Giardia, virus, and Cryptosporidium log-inactivation credit.     

电源通路管理器集成电路提供高压保护

描述电源通路管理器ICs的特点和应用.     

Modeling Tetrachloroethylene Decomposition in Photosonolysis Reactor

A mathematical model was developed for the decomposition of halogenated compounds in water and applied for tetrachloroethylene (PCE) in a flow-through photosonolysis reactor. To develop the model, a series of differential equations were formulated based on the principles of conservation of mass and mass action for hypothetical parent and daughter species, which were then solved analytically. The model sensitivity analysis was performed to determine if the model gives intuitive results. In support of the modeling effort, experiments were conducted. In a flow-through bench-scale reactor, simulated groundwater contaminated with PCE was irradiated with ultraviolet light and ultrasound concurrently in the presence of titanium dioxide (TiO2). The model was calibrated against the concentrations of PCE, trichloroethylene, methylene chloride, and chloride ion, obtained from the experiments. The proposition for the rate constants is based on fitting the model result to the experimental data. The model was further verified by comparing the model results against a different set of experimental data. The model results against available data indicated good agreement within experimental variations. The modeling suggests that PCE is more susceptible to the C-C double bond cleavage than the C-Cl bond cleavage. The results also support the assumptions that chlorinated methane compounds can be degraded at higher rates than chlorinated ethylene and that the values of the degradation rate constants increase with a decreasing number of chlorine atoms attached to the hydrocarbon compound.     

Role of Ponded Turbidity Currents in Reservoir Trap Efficiency

The capacity to store water in a reservoir declines as it traps sediment. A river entering a reservoir forms a prograding delta. Coarse sediment (e.g., sand) deposits in the fluvial topset and avalanching foreset of the delta, and is typically trapped with an efficiency near 100%. The trap efficiency of fine sediment (e.g., mud), on the other hand, may be below 100%, because some of this sediment may pass out of the reservoir without settling out. Here, a model of trap efficiency of mud is developed in terms of the mechanics of a turbidity current that plunges on the foreset. The dam causes a sustained turbidity current to reflect and form a muddy pond bounded upstream by a hydraulic jump. If the interface of this muddy pond rises above any vent or overflow point at the dam, the trap efficiency of mud drops below 100%. A model of the coevolution of topset, foreset, and bottomset in a reservoir that captures the dynamics of the internal muddy pond is presented. Numerical implementation, comparison against an experiment, and application to a field-scale case provide the basis for a physical understanding of the processes that determine reservoir trap efficiency.     

Transconductance and mobility of Si:B delta MOSFETs

Delta-doped MOSFETs have been fabricated in MBE-grown silicon using for the first time boron as the dopant within the delta layer. Current-voltage characteristics have been measured, and secondary ion mass spectrometry (SIMS) is used to confirm the location of the delta layer and the extent of layer broadening by diffusion during processing. Precise threshold voltages of the devices are difficult to determine since the devices (which all operate in depletion mode) take several volts to switch off. Transconductances of the devices have been measured, and it is shown how analysis of these results can yield estimates of the carrier mobility for transport along the delta layers despite the uncertainty in the threshold voltage. A clear transition is observed in the results which is attributed to the formation of a parasitic surface-channel field-effect transistor, providing conclusive evidence that the devices are conducting along a delta channel for part of the measured range of applied gate biases     

Early intervention for spelling problems: Teaching functional spelling units of varying size with a multiple-connections framework.

Poor spellers in 2nd grade (n?=?128) participated in 24 20-min sessions that included (a) direct instruction in the alphabet principle (most frequent phoneme-spelling connections); (b) modeling of different approaches, singly and in combination, for developing connections between spoken and written words for 48 words ordered by sound-spelling predictability; and (c) practice in composing. Results of this multilayered intervention showed that (a) more than 1 way of developing sound-spelling connections is effective in teaching spelling but that after training in the alphabet principle, combining whole word and onset-rime training is most effective in achieving transfer of the alphabet principle across word contexts; (b) functional spelling units of not only a single letter but also 2 or more letters are important in beginning spelling; and (c) training in spelling transfers to composition and word recognition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluating Ozone as a Remedial Treatment for Removing RDX from Unsaturated Soils

Years of wastewater discharge at the Department of Energy’s Pantex Plant have contaminated the vadose zone and underlying perched aquifer with hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Because the vadose zone is acting as a continual source of groundwater contamination, removing RDX from the unsaturated zone is paramount to prevent further contamination. We determined the efficacy of ozone to degrade and mineralize RDX. Solution experiments showed that ozone (27?mg?L?1; 150?mL?min?1) was effective in mineralizing 80% of the RDX (30?mg?RDX?L?1) provided that some Pantex soil was present to buffer the solution pH. Soil columns treated with ozone produced 50% RDX mineralization within 1 day and >80% within 7 day. Experiments designed to evaluate aerobic biodegradation following partial ozonation of a RDX solution showed that ozone-generated RDX products were much more biodegradable than untreated controls in aerobic microcosms (35 versus <0.3% cumulative mineralization). These results support the use of ozone as a remedial treatment for the contaminated vadose zone at the Pantex facility.     

The Silicon Backplane Design for an LCOS Polarization-Insensitive Phase Hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematic Freedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division-multiplexing telecommunications, television multicast, and holographic projection.