New advances on a posteriori error on constitutive relation in f.e. analysis

This paper deals with error estimators based on residuals on the constitutive relation which have been developed for the past 20 years at Cachan. Especially in the case of elasticity, these error estimators can become poor in situations where the material and the mesh are strongly anisotropic. The crucial point herein is the construction of equilibrated stress fields from the computed finite element solution. Therefore, in this paper, the approach and in particular this last point are re-examined. Several important modifications are introduced in the concepts and basic techniques. Hence, a new generation of error estimators which seem to be extremely robust upon initial applications has been generated.     

Linear crosstalk in 4×4 semiconductor optical amplifier gateswitch matrix

We report a comprehensive crosstalk investigation of a packaged InGaAsP/InP 4×4 semiconductor optical amplifier gate switch matrix, experimentally as well as theoretically. For a fully loaded switch with the same wavelength on all four inputs, all possible switching combinations are analyzed, thus yielding realistic crosstalk figures. Coherent and incoherent crosstalk phenomena are identified, and a switch crosstalk less than -40 dB has been measured     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs     

On obtaining shape from color shading

Color and Grassmann-Cayley Coordinates of Shape are considered in this article. The image irradiance equation for colored surfaces and the Grassman manifold λ of orbits Q = {B · h + c; detB ≠ 0} Where c is a vector sweeping the color space H, B is a 3 × 3 matrix, and h(x, y) is the color image of a Lambertian surface assumed to be a linear vector-function of the normal vectors. Different orbits Q(n) correspond to different shapes but they are invariant under color and illuminant transformation. Coordinates of an orbit Q in λ can be computed as 3 × 3 (2 × 2, sometimes) determining the elements of which are values of some linear functionals (receptive fields) of h(x, y). Based on the approach, a shape-from-shading algorithm was developed and successfully tested on the threeband color images of various real objects (an egg, cylinders and cones made of paper, etc.). © 1993 John Wiley & Sons, Inc.     

Optimum design for buckling of plain and stiffened composite axisymmetric shell panels/shells

The buckling of plain and discretely stiffened composite axisymmetric shell panels/shells made of repeated sublaminate construction is studied using the finite element method. In repeated sublaminate construction, a full laminate is obtained by repeating a basic sublaminate, which has a smaller number of plies. The optimum design for buckling is obtained by determining the layup sequence of the plies in the sublaminate by ranking, so as to achieve maximum buckling load for a specified thickness. For this purpose, a four-noded 48-dof quadrilateral composite thin shell element, together with fully compatible two-noded 16-dof composite meridional and parallel circle stiffener elements are used.     

A practical controller for explicit rate congestion control

This paper examines congestion control for explicit rate data networks. The available bit rate (ABR) service category of asynchronous transfer mode (ATM) networks serves as an example system, however, the results of this paper are applicable to other explicit rate systems as well. After a plant model is established, an adaptive control strategy is presented. Several algorithm enhancements are then introduced. These enhancements reduce convergence time, improve queue depth management, and reduce parameter bias. This work differentiates itself from the other contributions in the area of rate-based congestion control in its balanced approach of retaining enough complexity as to afford attractive performance properties, but not so much complexity as to make implementation prohibitively expensive