Bulk and interfacial physical properties of aqueous solutions of sodium lauryl sulphate and lauryl alcohol with air and benzene system: Part I: Aqueous solutions of sodium lauryl sulphate

Experimental measurements were made of the pH, density, bulk viscosity and electrical conductivity of aqueous solutions of sodium lauryl sulphate for a wide range of concentrations at 25°C. Also, the time-dependent interfacial tension data of this system with mutually saturated benzene phases are reported. Comparison of these data with literature values shows fair agreement in the majority of the cases and further reveals the lack of data in the earlier investigations below the critical micelle concentration of sodium lauryl sulphate in water. A detailed compilation of the data, reported in the literature since 1937, of the pH, density, bulk viscosity, electrical conductivity, surface tension, interfacial tension with benzene, surface excess concentration, surface shear viscosity, diffusivity and critical micelle concentration of the sodium lauryl sulphate system is given. The importance of this anionic surfactant system together with the various factors which influence the physical properties is examined.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Cholesterol transport and uptake in miniature swine fed vegetable and animal fats and proteis. 1. Plasma lipoproteins and LDL clearance

In a 2×2 factorial arrangement, miniature pigs were fed four diets containing vegetable protein/fat (soybean) and animal protein (egg white)/fat (beef tallow) to demonstrate the effects of protein and fat source on total plasma cholesterol, lipoprotein distribution, low density lipoprotein (LDL) composition, and plasma clearance of LDL-cholesterol and protein. Beef tallow consumption resulted in greater plasma cholesterol concentration, decreased LDL-cholesterol concentration, and a lower LDL-cholesterol to LDL-protein ratio than did consumption of soybean oil. High density lipoprotein (HDL)-cholesterol concentration was increased by beef tallow consumption. Cholesterol percentage by weight in LDL was significantly greater in pigs consuming soybean oil than those consuming beef tallow. Percentages by weight of protein, triglyceride and phospholipid in LDL were not significantly different in any group. Dietary protein source had no significant effect on total plasma cholesterol concentration, lipoprotein concentration or LDL composition. Egg white consumption decreased fractional catabolic rate and irreversible loss of LDL-cholesterol and LDL-protein when compared with consumption of soy protein. Dietary fat source had no consistent effect on LDL clearance from plasma. Dietary fat and protein seemed to influence lipoprotein metabolism by different mechanisms. Fat source altered lipoprotein concentration and LDL composition, whereas protein source affected the removal rate of LDL from plasma. Data taken from a dissertation submitted to Iowa State University by L. S. Walsh Hentges as partial fulfillment of the requirements for the Ph.D. degree. A preliminary paper, was presented at the meeting of the American Oil Chemists' Society in Dallas, Texas, May, 1984.     

冠带层新平台技术

子午线轮胎出现不久，就采用钢丝带束层代替了纤维带束层，这对于实现子午线轮胎提高使用寿命和改善操纵性能的潜能是必要的。     

Laser Specular Reflectance and the Optical rms Roughness of Alumina

Using laser specular reflectance, the optical rms roughnesses (σ₀'S) of 42 polycrystalline aluminas (PCA's) were determined. From these conventional experimental results, a nomogram was constructed so that single grazing angle (α) measurements could be used to predict σ₀. Subsequently, the nomogram was reassessed using five commercially important PCA's and one single-crystal sapphire (SC). The outcomes were twofold: that this nomogram was valid for PCA's over the range of 0.28 σ₀ 0.10 μm, but that the nomogram was invalid for SC sapphire. When the conventional experimental method was compared with the nomogram method at three different single-angle values, a 1:1 correspondence was observed for α= 78°, 80°, and 82°. The present noncontact method is advocated for speed and cleanliness, particularly when a quality assurance method is desired.     

Morphology and properties of poly(vinyl chloride)–polyurethane blends

The objective of this research was to study the morphology and properties of PVC–polyurethane blends. Studies on blends of a segmented polyether polyurethane with PVC were carried out utilizing differential scanning calorimetry, Rheovibron, stress–strain, infrared peak position studies, and infrared dichroism experiments. This thermodynamically incompatible system was made kinetically compatible by precipitation from tetrahydrofuran (THF) solutions. THF–dioxane solution casting and melt processing produced an incompatible system. The compatible polyurethane–PVC system contains a well-mixed PVC–polyether matrix phase as evidenced by T_g shifts, orientation characteristics, and infrared peak position changes. The aromatic urethane segments which exhibit microphase separation in the pure polyurethane are not solubilized by blending with PVC by any of sample preparation methods used in this study.     

Effects of mite resistance mechanism of geraniums on mortality and behavior of foxglove aphid (Acyrthosiphon solani Kaltenbach)

Geraniums (Pelargonium xhortorum Bailey) possess a pest-resistance mechanism, based on glandular trichomes and the exudate they produce, that has been shown to be effective against the two-spotted spider mite (Tetranychus urticae Koch). Using an intact plant bioassay, the effectiveness of the resistance mechanism was determined for another potential pest, the foxglove aphid (Acyrthosiphon solani Kaltenbach). Comparisons were made between plant lines previously analyzed for their degree of resistance to mites, as well as their glandular trichome density and trichome exudate production. Over 100 aphid adults were bioassayed on each of the five plant lines used in the experiment. In addition to adult aphid survival, the production and survival of nymphs was determined in this bioassay. The results indicate that plant lines that are resistant to the two-spotted spider mite are also resistant to the foxglove aphid, while lines susceptible to mites are susceptible to the aphids. To evaluate the physical impediment features of the trichome exudate, the behavior of foxglove aphid nymphs was compared on two geranium lines, one a resistant line with high trichome densities and large quantities of exudate and the second a susceptible line with few trichomes and reduced exudate. A third leaf surface type was produced by washing the exudate from resistant leaves using a mildly basic buffer solution prior to the bioassay. Aphid behavior was divided into five categories: feeding or probing, resting, wandering, struggling, and immobilized. On both susceptible leaves and resistant leaves from which the exudate had been removed by washing, the aphids settled quickly and were observed with inserted stylets during most of the observation intervals. In contrast, aphids on the unwashed resistant leaf surfaces often became ensnared in the sticky trichome exudate and had difficulty in settling to probe the leaf. Physical entrapment by glandular trichome exudate appears to be an important aspect of aphid resistance in geraniums.     

Lipid composition of the membrane released after an in vitro acrosome reaction of epididymal boar sperm

Prior to fertilization, mammalian sperm must undergo the acrosome reaction, which involves modifications of the plasma and outer acrosomal membranes followed by vesiculation and release of the membranes. The membrane fraction that was released from caudal boar sperm undergoing an in vitro acrosome-like reaction was isolated and characterized with respect to density, marker enzymes and lipid composition. This membrane had a lower phospholipid/protein ratio (mg/mg) than the sperm plasma membrane, whereas both membranes had similar molar sterol/phospholipid ratios. The major phospholipid was sphingomyelin, followed by phosphatidylethanolamine and phosphatidylcholine, whereas in the plasma membrane the order was reversed; the two major phosphoglycerides contained alkylacyl and alkenylacyl species in addition to the diacyl species. The released membrane also contained lower amounts of cholesterol sulfate and unsaturated fatty acids than the plasma membranes. These results, in combination with our studies on the changes of the sperm membranes during maturation and acrosome reaction, will allow a better understanding of the mechanism of the sperm acrosome reaction.     

Molar absorptivity of poly(methyl methacrylate) in the near-ultraviolet region

The molar absorptivities of methyl methacrylate monomer and of thermally polymerized, monomer-free poly(methyl methacrylate) have been measured in the range 2200–3000 Å, and smoothed values are presented at wavelength intervals of 20 Å over much of this range. Typical amounts of monomer present in a thermally polymerized bulk polymer and in films cast from CH₂Cl₂ solutions of the bulk polymer have been ascertained. The use of such absorptivity values to determine the amount of monomer present in polymer samples is evaluated.