Effect of SiNx Gate Dielectric Deposition Power and Temperature on a-Si:H TFT Stability

The stability of thin-film transistors (TFTs) of hydrogenated amorphous-silicon (a-Si:H) against gate-bias stress is improved by raising the deposition power and temperature of the silicon nitride gate dielectric. We studied the effects of power density between 22 and 110 mW/cm² and temperature between 150degC and 300degC . The time needed to shift the threshold voltage by 2 V varies by a factor of 12 between low power and low temperature, and high power and high temperature. These results highlight the importance of fabricating a-Si:H TFTs on flexible plastic with the SiN_x gate dielectric deposited at the highest possible power and temperature.     

Calibration of 3D kinematic systems using orthogonality constraints

Processing images acquired by multi-camera systems is nowadays an effective and convenient way of performing 3D reconstruction. The basic output, i.e. the 3D location of points, can easily be further processed to also acquire information about additional kinematic data: velocity and acceleration. Hence, many such reconstruction systems are referred to as 3D kinematic systems and are very broadly used, among other tasks, for human motion analysis. A prerequisite for the actual reconstruction of the unknown points is the calibration of the multi-camera system. At present, many popular 3D kinematic systems offer so-called wand calibration, using a rigid bar with attached markers, which is from the end user’s point of view preferred over many traditional methods. During this work a brief criticism on different calibration strategies is given and typical calibration approaches for 3D kinematic systems are explained. In addition, alternative ways of calibration are proposed, especially for the initialization stage. More specifically, the proposed methods rely not only on the enforcement of known distances between markers, but also on the orthogonality of two or three rigidly linked wands. Besides, the proposed ideas utilize common present calibration tools and shorten the typical calibration procedure. The obtained reconstruction accuracy is quite comparable with that obtained by commercial 3D kinematic systems.     

3D Unsteady RANS Modeling of Complex Hydraulic Engineering Flows. II: Model Validation and Flow Physics

A chimera overset grid flow solver is developed for solving the unsteady Reynolds-averaged Navier-Stokes (RANS) equations in arbitrarily complex, multiconnected domains. The details of the numerical method were presented in Part I of this paper. In this work, the method is validated and applied to investigate the physics of flow past a real-life bridge foundation mounted on a fixed flat bed. It is shown that the numerical model can reproduce large-scale unsteady vortices that contain a significant portion of the total turbulence kinetic energy. These coherent motions cannot be captured in previous steady three-dimensional (3D) models. To validate the importance of the unsteady motions, experiments are conducted in the Georgia Institute of Technology scour flume facility. The measured mean velocity and turbulence kinetic energy profiles are compared with the numerical simulation results and are shown to be in good agreement with the numerical simulations. A series of numerical tests is carried out to examine the sensitivity of the solutions to grid refinement and investigate the effect of inflow and far-field boundary conditions. As further validation of the numerical results, the sensitivity of the turbulence kinetic energy profiles on either side of the complex pier bent to a slight asymmetry of the approach flow observed in the experiments is reproduced by the numerical model. In addition, the computed flat-bed flow characteristics are analyzed in comparison with the scour patterns observed in the laboratory to identify key flow features responsible for the initiation of scour. Regions of maximum shear velocity are shown to correspond to maximum scour depths in the shear zone to either side of the upstream pier, but numerical values of vertical velocity are found to be very important in explaining scour and deposition patterns immediately upstream and downstream of the pier bent.     

Constrained Structure and Motion From Multiple Uncalibrated Views of a Piecewise Planar Scene

This paper is about multi-view modeling of a rigid scene. We merge the traditional approaches of reconstructing image-extractable features and of modeling via user-provided geometry. We use features to obtain a first guess for structure and motion, fit geometric primitives, correct the structure so that reconstructed features lie exactly on geometric primitives and optimize both structure and motion in a bundle adjustment manner while enforcing the underlying constraints. We specialize this general scheme to the point features and the plane geometric primitives. The underlying geometric relationships are described by multi-coplanarity constraints. We propose a minimal parameterization of the structure enforcing these constraints and use it to devise the corresponding maximum likelihood estimator. The recovered primitives are then textured from the input images. The result is an accurate and photorealistic model.Experimental results using simulated data confirm that the accuracy of the model using the constrained methods is of clearly superior quality compared to that of traditional methods and that our approach performs better than existing ones, for various scene configurations. In addition, we observe that the method still performs better in a number of configurations when the observed surfaces are not exactly planar. We also validate our method using real images.     

Zum nachweis von konservierungsmitteln in k?se und schmelzk?se

Zusammenfassung Es wird ein Analysengang zum Nachweis von Konservierungsmitteln beschrieben. Auf Oxydationsmittel wird im Käse direkt geprüft. Hexamethyientetramin wird als Formaldehyd im Destillat der Wasserdampfdestillation nachgewiesen. Auf die übrigen in Frage kommenden Stoffe (Salicylsäure, Paraoxybenzoesäure und ihre Ester, Benzoesäure und Parachlorbenzoesäure) wird im Toluolauszug geprüft.     

High mobility nanocrystalline silicon transistors on clear plastic substrates

We demonstrate nanocrystalline silicon (nc-Si) top-gate thin-film transistors (TFTs) on optically clear, flexible plastic foil substrates. The silicon layers were deposited by plasma-enhanced chemical vapor deposition at a substrate temperature of 150/spl deg/C. The n-channel nc-Si TFTs have saturation electron mobilities of 18 cm/sup 2/V/sup -1/s/sup -1/ and transconductances of 0.22 /spl mu/S/spl mu/m/sup -1/. With a channel width to length ratio of 2, these TFTs deliver up to 0.1 mA to bottom emitting electrophosphorescent organic light-emitting devices (OLEDs) which were fabricated on a separate glass substrate. These results suggest that high-current, small-area OLED driver TFTs can be made by a low-temperature process, compatible with flexible clear plastic substrates.     

Weak quantifier elimination for the full linear theory of the integers

We describe a weak quantifier elimination procedure for the full linear theory of the integers. This theory is a generalization of Presburger arithmetic, where the coefficients are arbitrary polynomials in non-quantified variables. The notion of weak quantifier elimination refers to the fact that the result possibly contains bounded quantifiers. For fixed choices of parameters these bounded quantifiers can be expanded into disjunctions or conjunctions. We furthermore give a corresponding extended quantifier elimination procedure, which delivers besides quantifier-free equivalents also sample values for quantified variables. Our methods are efficiently implemented within the computer logic system redlog, which is part of reduce. Various examples demonstrate the applicability of our methods. These examples include problems currently discussed in practical computer science.     

Laser-induced breakdown spectroscopy of gas mixtures of air, CO2, N2, and C3H8 for simultaneous C, H, O, and N measurement

Laser-induced breakdown spectroscopy (LIBS) was applied for simultaneous measurement of the elements C, H, N, and O in CO2-air, C3H8-CO2, and C3H8-N2 gas mixtures at atmospheric pressure. A single 7-mm-diameter aperture at the sample chamber was used for 1064-nm Nd:YAG laser irradiation and plasma signal output to an echelle spectrometer. Double-pulse laser bursts of approximately 8-ns pulse width (FWHM) and 250-ns interpulse separation were applied to increase the plasma signal. Calibration curves of the LIBS signal versus the partial pressure or the atomic abundance ratios were taken by dilution series in intervals that are relevant in the combustion of heptane (C7H16) near an equivalence ratio of 1.