改革实践教学模式、培养学生综合能力──增设给水排水专业质量检测实习的体会

对给排水专业在优化专业教学体系,深化专科教学模式及教学内容改革中,实施的四次大型综合性实践教学,进行了认真总结．经过改变随课跟进的实验教学旧模式,在教学计划中增设了“水质指标综合测试与水质评价”实习内容使分散的教学实验得以“水质监测与评价”为骨架,有机穿插在实践教学中,为专科学校培养复合应用型人才,进行了有益的探索与实践,并获得较好效果．     

The first measurement of an absolute surface concentration of reaction intermediates in ethylene hydrogenation

The first measurement of a turnover rate with respect to surface intermediate concentration in a high pressure heterogeneous catalytic reaction is reported. By using infrared-visible sum frequency generation to study the hydrogenation of ethylene on Pt(111), it was found that the surface concentration of -bonded ethylene, the key reaction intermediate, represented approximately 4% of a monolayer. Thus the absolute turnover rate per surface adsorbed ethylene molecule is 25 times faster than the rate measured per platinum atom. To explain these results, we propose a model of weakly adsorbed ethylene intermediates reacting on atop sites.     

Method to derive ocean absorption coefficients from remote-sensing reflectance

A method to derive in-water absorption coefficients from total remote-sensing reflectance (ratio of the upwelling radiance to the downwelling irradiance above the surface) analytically is presented. For measurements made in the Gulf of Mexico and Monterey Bay, with concentrations of chlorophyll-a ranging from 0.07 to 50 mg/m(3), comparisons are made for the total absorption coefficients derived with the suggested method and those derived with diffuse attenuation coefficients. For these coastal to open-ocean waters, including regions of upwelling and the Loop Current, the results are as follows: at 440 nm the difference between the two methods is 13.0% (r(2) = 0.96) for total absorption coefficients ranging from 0.02 to 2.0 m(-1); at 488 nm the difference is 14.5% (r(2) = 0.97); and at 550 nm the difference is 13.6% (r(2) = 0.96). The results indicate that the method presented works very well for retrieval of in-water absorption coefficients exclusively from remotely measured signals, and that this method has a wide range of potential applications in oceanic remote sensing.     

Dynamic digital photorefractive memory for optoelectronic neural network learning modules

Neural network modules based on page-oriented dynamic digital photorefractive memory are described. The modules can implement two different interconnection organizations, fan-out and fan-in, depending on their target network applications. Neural network learning is realized by the real-time memory update of dynamic digital photorefractive memory. Physical separation of subvolumes in the page-oriented photorefractive memory architecture contributes to the low cross talk and high diffraction efficiency of the stored interconnection weights. Digitally encoded interconnection weights ensure high accuracy, providing superior neural network system scalability. Module scalability and feedforward throughput have been investigated based on photorefractive memory geometry and the photodetector power requirements. The following four approaches to extend module scalability are discussed: partial optical summation, semiparallel feedforward operation, time partitioning, and interconnection matrix partitioning. Learning capabilities of the system are investigated in terms of required interconnection primitives for implementing learning processes and three memory-update schemes. The experimental results of Perceptron learning network implementation with 900 input neurons with digital 6-bit accuracy are reported.     

Birefringent properties of diametrically loaded gradient-index lenses

Gradient-index (GRIN) lenses have been widely used as collimators in various fiber-optic sensors and as optical coupling devices in components designed for optical communication systems. However, relatively little attention has been paid to the birefringent properties of GRIN lenses and the potential for using them as photoelastic sensing elements in optical transducers. Analytical and experimental results are described that were obtained for the intensity distribution produced by studying a GRIN lens by using a polariscope. The residual birefringence inherent in an unloaded lens is initially studied. The lens is then assumed to be diametrically loaded and the superposition is studied by the method of ray tracing. When the results obtained from the simulation for a Selfoc, 0.25-pitch lens are compared with experimental data, an excellent agreement is obtained. Intensity increases monotonically with load, confirming that the lens would be a good choice for the sensing element of an optical transducer designed as part of a strain or acceleration measurement system. The numerical simulation is then used to study the influence of residual stress on sensitivity.     

Optical monitoring of silver-based transparent heat mirrors

Both three-layer (TiO(2)-Ag-TiO(2)) and five-layer (TiO(2)-Ag-TiO(2)-Ag-TiO(2)) heat mirrors with optimum transmission in the visible and good reflectance in the IR have been designed by admittance diagram techniques. The mirrors were fabricated successfully by optical monitoring. An interesting anomalous layer was found and explained, and its equivalent refractive index and thickness are 2.015 - i0.016 and 2.56 nm, respectively.     

Characterization of centrifugally atomized Al-12Si-5Fe-3Cu-1Mg(wt%) alloy powder and extruded rod

The Al-12Si-5Fe-3Cu-1Mg(wt%) alloy was rapidly solidified by centrifugal atomization. The microstructural characteristics of rapidly solidified powder and the microstructure changes with heat treatment were investigated in terms and related to powder size. The microstructures of the powder consisted of dendritic -Al, eutectic phase, Cu-rich phase, and needle-like intermetallic compounds. These phases were much finer than that of ingot cast structure and the size decreased with increasing cooling rate. The X-ray diffraction of the atomized powders revealed the presence of non-equilibrium 3-(AlFeSi) intermetallic phase. This phase appeared to transform to an equilibrium -(AlFeSi) phase by heating at temperatures above 470°C. The extruded rod which was hot extruded at 360°C with an extrusion ratio of 40:1 also revealed the presence of the -(AIFeSi) intermetallic phase. Using DSC, the exothermic peak due to precipitation from the supersaturated -Al matrix was observed in the range of 200–250°C during continuous heating of atomized powder, and the size of the peaks increased with decreasing powder size.     

Characteristics of sol-gel derived PZT thin films with lead oxide cover layers and lead titanate interlayers

The sol-gel derived PbZr_0.53Ti_0.47O₃ (PZT) films were fabricated on the bare Pt/Ti/SiO₂/Si substrates or the same substrates coated by the PbTiO₃ (PT) interlayers. The post-deposition annealing temperature and time were optimized when the PbO cover layers and PbO vapour-containing atmosphere were compared with each other and adopted as the method to diminish the lead-loss problem during the high-temperature post-deposition annealing. The X-ray diffraction patterns, microstructures, and electrical properties such as relative permittivity, _r, remanent polarization, P _r, and coercive electrical field, E _c, were investigated in relation to the annealing conditions. The PZT films deposited on the bare Pt/Ti/SiO₂/Si substrates under the PbO vapour-containing atmosphere showed better electrical properties. This indicates that the PbO vapour-containing atmosphere may be the better method of lead-loss-prevention to process the lead-containing films rather than the PbO cover layer method. The electrical characteristics of the PZT films, _r=1150, a dissipation factor of 0.039, P _r=26 C cm^–2, and E _c=40.5 kV cm^–1 were measured at 1 kHz. When PZT films were deposited on substrates coated by the PT layers, PZT-PT films with single perovskite phase were derived by post-deposition annealing at 500 °C for 1 h. However, the relative electrical properties are very poor, i.e. E _r=160, P _r=2.0 C cm^–2 and E _c=75 kVcm^–1. The optimum combination for preparing PZT-PT films is a 40 nm PbTiO₃ interlayer and annealing conditions of 6 h at 550 °C in a PbO vapour-containing atmosphere; the derived films exhibit electrical properties of E _r=885, P _r=21.5 C cm^–2 and E _c=64 kV cm^–1. The combination of inserting a PT interlayer and annealing in a PbO vapour-containing atmosphere can prevent the formation of electrical short paths. In this case, nearly pin-hole-free PZT films can be grown on the PT (interlayer) /Pt/Ti/SiO₂/Si substrates. It is believed that it is possible to prepare the PZT films with nano-scale uniformity, reproducible quality, which may be worth considering for commercial applications.     

Microstructural evolution of potassium titanate whiskers during the synthesis by the calcination and slow-cooling method

K₂Ti₆O₁₃ whisker was synthesized by the calcination and slow-cooling method, and the microstructural evolution of whiskers, and the relations between the phase and the layer structure, were investigated. The amount of K₂O in the starting powder mixture played a key role in forming a layer structure, which can be obtained by addition of excess K₂O. During calcination, rod-like K₂Ti₆O₁₃ particles with a layer structure were formed by reactions between K₂O and TiO₂. During slow-cooling, the K₂O-rich liquid phase reacted with K₂Ti₆O₁₃ layers near the boundary and k₂Ti₄O₉ whiskers were produced by the splitting of layers within rod-like k₂T₆O₁₃ particles. k₂Ti₄O₉ whiskers were reformed into k₂T₆O₁₃ whiskers by treatment in boiling water and reheating. The synthesized k₂T₆O₁₃ whiskers had a clean surface and a length exceeding 100 m.     

Iterative optimization of high-affinity proteases inhibitors using phage display. 1. Plasmin

We generated a series of libraries having variants of the first Kunitz domain of human lipoprotein-associated coagulation inhibitor (LACI-D1, also known as tissue-factor pathway inhibitor-I) displayed on bacteriophage M13 as pIII-fusions. We varied LACI-DI iteratively in two regions: the P1 region (positions 10-21) and the "second loop", (positions 31-39), which together form one end of the domain. Display-phage library Lib#1 allows 31 200 amino-acid sequences in P1 region (residues 13, 16-19). Preliminary, we screened Lib#1 against human plasmin (PLA, EC 3.4.21.7) immobolized on agarose to enrich for phage displaying variants with PLA affinity. We introduced a 1600-fold increase in second-loop diversity (residues 31, 32, 34, 39) into the population of selectants from Lib#1, yielding Lib#2. Lib#2 (allowing approximately 50 million amino-acid sequences) was screened against PLA-agarose to isolate highest affinity binders. Protein EPI-P211, derived from the best isolate of Lib#2, inhibits PLA with Ki = 2 nM (at least 500-fold better than LACI-D1) and with high specificity. We used amino-acid sequences of PLA-binding selectants to design a PLA-biased library (Lib#3) which we screened against PLA. The protein EPI-P302 (derived from the best binder obtained from Lib#3) has Ki for PLA inhibition of 87 pM, which is 25-fold better than the first-round best binder and > or = 12 500-fold better than LACI-D1. EPI-P302 also shows very high specificity for PLA vs other human proteases and is resistant to inactivation by oxidants and extremes of temperature or pH. Thus, one can use selectants from one library to design target-tailored combinatorial libraries and obtain quite stable, highly specific, very high-affinity binding molecules while maintaining an essentially human framework.