A highly efficient polarized superfluorescent fiber source for fiber-optic gyroscope applications

We demonstrate a novel polarized superfluorescent fiber source (SFS) that increases the output power in the desired polarization by a factor of 1.96 over that of an unpolarized SFS at the same pump. This is achieved by inserting a polarizer at the optimal point in the bidirectionally pumped erbium-doped fiber of an unpolarized SFS. Stable pump-power-dependent mean wavelength operation and less sensitivity to the insertion loss, important for fiber-optic gyroscope applications, are obtained in this configuration.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Traffic grooming on WDM rings using optical burst transport

A sublambda traffic-grooming scheme on wavelength-division-multiplexed (WDM) rings, which is called optical burst transport (OBT), is proposed. The network protocol and architecture allow increased flexibility to tailor the transport network behavior for efficient delivery of bursty data traffic. Using different network parameters, its performance is analyzed via simulation, and the implementation issues including the media-access-control (MAC) protocol, tunable-filter controller, and burst-mode receiver are addressed. Finally, the feasibility of the OBT with an experimental testbed built by the authors is demonstrated and a streaming-video application is used to present its overall functionality.     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.     

Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.     

短半径水平井铰链式井下动力钻具组合力学模型的建立与分析

铰链式井下动力钻具组合是当前短半径水平钻井中最先进的一种新型工具。本文首先建立了铰接式井下动力钻具组合在二维井身条件下的力学模型并介绍了该模型的求解方法和过程,详细分析了若干结构学数、井身几何参数和钻井工艺参数对钻头侧向力的定量影响,为铰接式井下动力钻具组合的结构设计和短半径水平井轨道控制提供了力学分析基础。     

Study on Contamination Control for Yield Enhancement in the Manufacturing Line of Cellular Phone Modules

Practical studies on the method of contamination control for yield enhancement in the cellular phone modules production line were carried out. A contamination control method was proposed, consisting of data collection, data analysis, improvement action, verification, and implementation of control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the cellular phone modules manufacturing process, and these methods were evaluated by the variation of yield loss before and after implementing the actions for improvement. In the partition check method, the critical process step was selected, and yield loss reduction through improvement actions was observed, whereas in the composition analysis, critical sources were selected, and yield loss reduction through improvement actions was investigated. From the results, it is concluded that the partition check and the composition analysis are effective solutions for contamination control in cleanroom production lines.     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。