Geochemical implications of trace elements and sulfur in the saturate, aromatic and resin fractions of crude oil from the Mara and Mara Oeste fields, Venezuela

Ten trace elements (Cr, Zn, Fe, Mn, Cu, Co, Ni, Mo, V and Sr) and sulfur were determined in the saturate, aromatic and resin fractions of 15 crude oils from Mara (DM) and Mara Oeste (DMO) fields of the Maracaibo Basin, Venezuela. The oils studied are classified as unaltered or altered by biodegradation. In the altered oil, the depletion of n-alkanes, the absence of isoprenoids and the presence of steranes and hopanes unaltered by biodegradation are indicative of moderate biodegradation. The elements Zn, Fe, Mn, Cu, Ni, and Sr were detected in the saturated hydrocarbon fraction; Cr and V were detected in the aromatic fraction in addition to the above elements; whereas the elements detected for the resin fraction were Cr, Zn, Fe, Cu, Ni, Mo, V, and Sr. Co was not detected in any fractions of the oils analyzed. Sulfur was found in all fractions of the oils studied. It was proposed that Fe, Zn, Sr, and Mn could have entered the oil during migration or Fe, Zn and Mn as pollutants during oil extraction. Cr and Cu may be of biological origin and Mo could be incorporated into the reservoir through bacteria. Only S, V, and Ni in the resin fractions can be used as indicators of the origin and correlation of Mara and Mara Oeste oils. Based on the results obtained in this work, it can be established that the V/(V+Ni) ratio in the resin fraction can be used as a correlation parameter, for these oils.     

Monitoring the cure of unsaturated polyester resins by pressure DSC and FTIR-PLC

A high pressure differential scanning calorimeter (DSC) and a Fourier transform infrared (FTIR) spectrometer with a prism liquid cell (PLC) were used to monitor the reaction kinetics of styrene-unsaturated polyester resins at elevated curing temperatures and pressures. The thermal method is easy to perform but provides only an overall reaction exotherm. The spectroscopic method can detect the detailed reaction mechanism of copolymerizations. It is, however, less quantitative and the calculation is much more time-consuming compared to the thermal analysis. Reactions of two unsaturated polyester resins with different molecular structure were measured by these two methods. Results showed that applying cure pressure on unsaturated polyester resins reduced the reaction rate but increased the final conversion. The styrene reaction was enhanced more than the polyester reaction at high curing temperatures.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

A study of the tool-chip interface contact problem under low cutting velocity with an elastic cutting tool

To understand the effects of elastic deformation of the tool and the crater phenomenon generated by the cutting force and high pressure during metal cutting processing on the cutting process, an iterative mathematical model for calculating the tool-chip contact is developed in this paper under the assumption of elastic cutting tools. In this model, the finite-element method is used to simulate the cutting of mild steel by a cutting tool of three different materials. The results obtained in the simulation are found to match experimental data reported by related studies. The simulation results also indicate that tools with a smaller stiffness produce greater elastic deformation. Further, decrease of the rake angle due to elastic deformation of the tool can result in greater difficulty in internal deformation of the material and an increase in cutting force. The micro-crater phenomenon on the tool face generated by high pressure at the tool-chip interface is the preliminary symptom of crater wear on the tool face. Therefore, under some machining conditions, such as in precision machining or in automation processing where tool compensation is required, the phenomenon of elastic deformation of the tool must be considered carefully to ensure product precision.     

Microstructure and tensile properties of squeeze cast magnesium alloy AM50

High-pressure die cast magnesium alloy AM50 is currently used extensively in large and complex shaped thin-wall automotive components. For further expansion of the alloy usage in automobiles, novelmanufacturing processes need to be developed. In this study, squeeze casting of AM50 alloy with a relatively thick cross section was carried out using a hydraulic press with an applied pressure of 70 MPa. Microstructure and mechanical properties of the squeeze cast AM50 with a cross-section thickness of 10 mm were characterized in comparison with the die cast counterpart. The squeeze cast AM50 alloy exhibits virtually no porosity in the microstructure as evaluated by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength and elongation, for the squeeze cast samples over the conventional high-pressure die cast parts. The analysis of tensile behavior show that the strain-hardening rate during the plastic deformation of the squeeze cast specimens is constantly higher than that of the die cast specimens. The scanning electron microscopy fractography evidently reveals the ductile fracture features of the squeeze cast alloy AM50.     

Development of an Adaptive EC Website With Online Identified Cognitive Styles of Anonymous Customers

This study developed an adaptive electronic commerce (EC) website based on users' cognitive styles without asking users to complete any evaluation forms. In this system, a multilayer feed forward neural network (MLFF) was designed to identify the cognitive styles of anonymous users by observing their browsing behavior. Then the system presented the adaptive interfaces, designed by investigating the relationships between users' cognitive styles and browsing behavior, to users based on the identified cognitive styles. Experiments were conducted to evaluate the effectiveness of the system. The experimental results verified the potential benefits of MLFF in identifying anonymous users' cognitive styles during browsing of EC applications and provided evidence that an adaptive EC website that presents product data consistent with the users' cognitive styles can be beneficial to one-to-one Internet marketing not only for users whose cognitive styles are known before browsing but also for anonymous users whose cognitive styles are identified during browsing.     

Mobile Underwater Sensor Networks for Protection and Security: Field Experience at the UAN11 Experiment

The EU‐funded project UAN (Underwater Acoustic Network) was aimed at conceiving, developing, and testing at sea an innovative and operational concept for integrating underwater and above‐water sensors in a unique communication system to protect offshore and coastline critical infrastructures. This work gives details on the underwater part of the project. It introduces a set of original security features and gives details on the integration of autonomous underwater vehicles (AUVs) as mobile nodes of the network and as surveillance assets, acoustically controlled by the command and control center to respond against intrusions. Field results are given of the final UAN project sea trial, UAN11, held in May 2011 in Norway. During the experimental activities, a UAN composed of four fixed nodes, two AUVs, and one mobile node mounted on the supporting research vessel was operated continuously and integrated into a global protection system. In this article, the communication performance of the network is reported in terms of round‐trip time, packet loss, and average delivery ratio. The major results of the experiment can be thus summarized: the implemented network structure was successful in continuously operating over five days with nodes seamlessly entering and exiting the network; the performance of the network varied greatly with fluctuations in the acoustic channel; the addition of security features induced a minor degradation in network performance with respect to channel variation; the AUVs were successfully controlled from a remote station through acoustic signals routed by the network. © 2013 Wiley Periodicals, Inc.     

Telehealth and ubiquitous computing for bandwidth-constrained rural and remote areas

The information and communication technology infrastructure available in rural and remote areas may often not have the bandwidth to support all types of telehealth applications; therefore, for example, some traditionally envisaged videoconferencing-based telehealth applications may not be able to be used or not used in their anticipated form at this time. While the level of broadband services available may impose limitations on these types of telehealth applications, in this review article, we identify applications that allow the maximizing of telehealth benefits in the presence of low-bandwidth connectivity and have potential benefits well-matched to rural and remote area healthcare challenges. In particular, we include consideration of how ubiquitous computing might potentially bring non-traditional approaches to telehealth that can also come into usage more immediately in bandwidth-constrained rural and regional areas. In this article, we review the benefits of ubiquitous computing for rural and remote telehealth including social media-based preventative, peer support and public health communication, mobile phone platforms for the detection and notification of emergencies, wearable and ambient biosensors, the utilization of personal health records including in conjunction with mobile and sensor platforms, chronic condition care and management information systems, and mobile device–enabled video consultation.     

Cryptanalysis of the RCES/RSES image encryption scheme

Recently, a chaos-based image encryption scheme called RCES (also called RSES) was proposed. This paper analyses the security of RCES, and points out that it is insecure against the known/chosen-plaintext attacks: the number of required known/chosen plain-images is only one or two to succeed an attack. In addition, the security of RCES against the brute-force attack was overestimated. Both theoretical and experimental analyses are given to show the performance of the suggested known/chosen-plaintext attacks. The insecurity of RCES is due to its special design, which makes it a typical example of insecure image encryption schemes. A number of lessons are drawn from the reported cryptanalysis of RCES, consequently suggesting some common principles for ensuring a high level of security of an image encryption scheme.