Modification of dextran through the grafting of N‐vinyl‐2‐pyrrolidone and studies of physicochemical phenomena in terms of metal‐ion uptake,swelling capacity,and flocculation

The optimum conditions for grafting N‐vinyl‐2‐pyrrolidone onto dextran initiated by a peroxydiphosphate/thiourea redox system were determined through the variation of the concentrations of N‐vinyl‐2‐pyrrolidone, hydrogen ion, potassium peroxydiphosphate, thiourea, and dextran along with the time and temperature. The grafting ratio increased as the concentration of N‐vinyl‐2‐pyrrolidone increased and reached the maximum value at 24 × 10^?2 mol/dm³. Similarly, when the concentration of hydrogen ion increased, the grafting parameters increased from 3 × 10^?3 to 5 × 10^?3 mol/dm³ and attained the maximum value at 5 × 10^?3 mol/dm³. The grafting ratio, add‐on, and efficiency increased continuously with the concentration of peroxydiphosphate increasing from 0.8 × 10^?2 to 2.4 × 10^?2 mol/dm³. When the concentration of thiourea increased from 0.4 × 10^?2 to 2.0 × 10^?2 mol/dm³, the grafting ratio attained the maximum value at 1.2 × 10^?2 mol/dm³. The grafting parameters decreased continuously as the concentration of dextran increased from 0.6 to 1.4 g/dm³. An attempt was made to study some physicochemical properties in terms of metal‐ion sorption, swelling, and flocculation. Dextran‐g‐N‐vinyl‐2‐pyrrolidone was characterized with infrared spectroscopy and thermogravimetric analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings

Effectiveness of linseed oil filled microcapsules was investigated for healing of cracks generated in paint/coatings. Microcapsules were prepared by in situ polymerization of urea–formaldehyde resin to form shell over linseed oil droplets. Characteristics of these capsules were studied by FTIR, TGA/DSC, scanning electron microscope (SEM) and particle size analyzer. Mechanical stability was determined by stirring microcapsules in different solvents and resin solutions. Cracks in a paint film were successfully healed when linseed oil was released from microcapsules ruptured under simulated mechanical action. Linseed oil healed area was found to prevent corrosion of the substrate.     

Transient thermal behaviour of a cylindrical wood particle during devolatilization in a bubbling fluidized bed

This work proposes a transient heat transfer model to predict the thermal behaviour of wood in a heated bed of sand fluidized with nitrogen. The 2-D model in cylindrical coordinates considers wood anisotropy, variable fuel properties, fuel particle shrinkage, and heat generation due to drying and devolatilization. The influence of initial fuel moisture content, thermal diffusivity, particle geometry, shrinkage, external heat transfer coefficient, chemical reaction kinetics and heats of reaction on temperature rise is presented. The cylindrical wood particles chosen for the study have length (l) = 20 mm, diameter (d) = 4 mm and l = 50 mm and d = 10 mm, both having an aspect ratio (l/d) of 5. The bed temperature is 1123 K. The model prediction is validated using measurements obtained from literature. The temperature rise in the wood particle is found to be sensitive to changes in the moisture content and thermal diffusivity and heat of reaction (in larger particles) while it is less sensitive to the external heat transfer coefficient and chemical kinetics. Also shrinkage is found to have a compensating effect and it does not have any significant influence on the temperature rise. Beyond an aspect ratio of three, the wood particle behaves as a 1-D cylinder.     

Probing the viscoelastic properties of brominated isobutylene‐co‐p‐methylstyrene rubber/tackifier blends using a rubber process analyzer

The viscoelastic behavior of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber/hydrocarbon resin blends and BIMS/phenol formaldehyde resin blends was studied with the use of a rubber process analyzer. Dynamic mechanical analysis and scanning electron microscopy were used to evaluate the compatibility between the BIMS/tackifier blends. Strain sweep tests at temperature below the softening point of the tackifiers showed the formation of resin–resin networks in the incompatible BIMS/phenolic resin blends. However, resin–resin network was not prominent in the case of the compatible BIMS/hydrocarbon resin blends. Frequency sweep tests were performed at the strain amplitude within the linear region at several temperatures and the variations of shear storage modulus, G′ and complex viscosity, η* against frequency were recorded. The tackifying resins modified the viscoelastic properties of the BIMS rubber by reducing the storage modulus at lower frequency and by increasing the storage modulus at higher frequencies. However, this action was found to be highly dependent on (a) rubber‐tackifier compatibility, (b) blend proportions, and (c) test temperature. Furthermore, stress relaxation measurements of the BIMS/tackifier blends at temperature below the softening point of the tackifiers showed longer period of relaxation for the incompatible BIMS/phenolic resin blends. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Stress relaxation behavior of glass fiber‐reinforced polyester composites prepared by the newly proposed rubber pressure molding

Stress‐relaxation behavior of glass fiber‐reinforced polyester composites, prepared by a recently developed manufacturing method called rubber pressure molding (RPM), is investigated with special reference to the effect of environmental temperature (−70°C to +100°C), fiber volume fraction (30–60%), and initial load level (1–5 kN). It is found that the stress‐relaxation rate decreases with an increase in the applied load of composites and a decrease in temperature. Below glass transition temperature, the rate of stress relaxation increases with an increase in volume fraction of fibers in the composites, whereas above glass transition temperature, it increases with a decrease in the volume fraction of fibers. The experimental results for a given composites are summarized by four values, the slopes of the two straight lines (two separate relaxation processes), and their intercepts upon the stress axis. Both the slopes are dependent upon the applied load, temperature, and volume fraction of fibers in the composites. Relaxation times in both primary and secondary are calculated over the wide range of temperatures, loads, and volume fraction of fibers in the composites. It depends strongly on the temperature, but does not depend strongly on the applied load and volume fraction of fibers. The performances of the composites are also evaluated through conventional compression‐molding process. The rate of stress relaxation is small when the composites are made of newly proposed RPM technique when compared with the conventional process. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Numerical studies of a tube-in-tube helically coiled heat exchanger

In the present study a tube-in-tube helically coiled (TTHC) heat exchanger has been numerically modeled for fluid flow and heat transfer characteristics for different fluid flow rates in the inner as well as outer tube. The three-dimensional governing equations for mass, momentum and heat transfer have been solved using a control volume finite difference method (CVFDM). The renormalization group (RNG) k– model is used to model the turbulent flow and heat transfer in the TTHC heat exchanger. The fluid considered in the inner tube is compressed air at higher pressure and cooling water in the outer tube at ambient conditions. The inner tube pressure is varied from 10 to 30 bars. The Reynolds numbers for the inner tube ranged from 20,000 to 70,000. The mass flow rate in the outer tube is varied from 200 to 600 kg/h. The outer tube is fitted with semicircular plates to support the inner tube and also to provide high turbulence in the annulus region. The overall heat transfer coefficients are calculated for both parallel and counter flow configurations. The Nusselt number and friction factor values in the inner and outer tubes are compared with the experimental data reported in the literature. New empirical correlations are developed for hydrodynamic and heat-transfer predictions in the outer tube of the TTHC.     

Performance of Kenics static mixer over a wide range of Reynolds number

The present study deals with the numerical simulation of flow patterns and mixing behaviour in Kenics static mixer over a wide range of Reynolds number. Three different sets of Kenics mixer (aspect ratio = 1.5) comprised of 3, 9 and 25 elements each have been characterized. The Reynolds number was varied in the range of 1 to 25,000 (i.e., from laminar to turbulent flow regime). The numerical approach takes into account the aspects of the fluid flow at higher Reynolds number values including circumferential velocity profiles at different cross-sections within the Kenics mixer, which were neglected in previous studies. It was observed that cross-sectional mixing in the turbulent flow regime takes place up to 30% of each element length at element-to-element transition; beyond that velocity profiles were uniform. The experiments were also carried out to measure the circumferential and axial velocity profiles and pressure drop in three different Kenics Mixers using air as fluid. The pressure drop per unit element (ΔP/η) was found to be independent of the number of Kenics mixing elements used in the system. The total pressure drop across Kenics mixer obtained by CFD simulations were compared with the experimental pressure drop values and correlations available in the literature. The numerical results were found in good agreement with the experimental as well as the results reported in the literature. A new pressure drop correlation in the Kenics static mixer has been developed.     

Low-Temperature Sintering of La(Ca)CrO3 Powder Prepared through the Combustion Process

Ultrafine La(Ca)CrO₃ (LCC) powder was prepared through the glycine–nitrate gel combustion process. It was shown for the first time that the use of relatively inexpensive CrO₃ as a starting material for chromium has potential for the bulk preparation of sinter-active LCC powder. As-prepared powder, when calcined at 700°C, resulted in LCC along with a small amount of CaCrO₄. The calcined powder was found to be composed of soft agglomerates with a particle size of ≈70–290 nm. The cold pressing and sintering of the calcined powder at 1200°C resulted in the mono-phasic La_0.7Ca_0.3CrO₃ with density ≈98% of its theoretical value. This is the lowest sintering temperature ever reported for La_0.7Ca_0.3CrO₃. The conductivity of the sintered La_0.7Ca_0.3CrO₃ at 1000°C was found to be ≈57 S/cm in air. The sintering and electrical behavior achieved for La_0.7Ca_0.3CrO₃ may find application as an interconnect material for high-temperature solid oxide fuel cells if problems with chemical expansion and poor conductivity in fuel can be overcome.     

Novel Synthesis of SrBi2Nb2O9 Powders From Hydroxide Precursors

Simple hydroxide precursors were used for the first time for the synthesis of a typical Aurivillius compound (SrBi₂Nb₂O₉ (SBN)) at a low temperature. This method is very advantageous because it circumvents the use of SrCO₃ in the case of conventional ceramics as well in the coprecipitation methods, thereby lowering the formation of the product phase. Commercially purchased strontium hydroxide is mixed thoroughly with freshly precipitated bismuth and niobium hydroxides in a stoichiometric ratio and heated at different temperatures ranging from 100°C to 750°C for 12 h. The sequence of the reaction and evolution of the product phase was monitored by X-ray diffraction (XRD) studies by recording the XRD for samples calcined at different temperatures. The incipient SBN phase begins to form at temperatures as low as 400°C, and phase formation was complete only at 650°C as revealed by the XRD observations. The differential thermal/thermogravimetric analyses) also corroborate this result. The morphology and average particle size of these powders were investigated by transmission electron microscopy studies.     

Corrosion behaviour and characterisation of Ni–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> composites prepared by pulse electrodeposition

The Ni–Nb₂O₅ composites were prepared by pulse electrodeposition method. Operating variables were optimized for getting a good deposit. The quantity of Nb₂O₅ particles in the coating was analyzed by an energy-dispersive X-ray diffraction spectrometer. X-ray diffraction and scanning electron microscopy were used to analyze the structure and surface morphology of the coatings. Texture coefficient and hardness of the deposits were determined and discussed. The corrosion behavior of the coatings was analyzed by traditional weight loss and electrochemical methods. Comparisons of the corrosion behaviour of coatings obtained by direct current (DC) and pulse current (PC) were investigated.