Highly Selective Pd‐Catalyzed Reductive Coupling of Substituted Haloarenes with Supported Phase‐Transfer Catalyst using Zn as the Reducing Agent

Highly selective reductive coupling of substituted haloarenes to biaryls is accomplished by Zn in N,N‐dimethylformamide (DMF) and in the presence of a catalytic amount of PdCl₂, PPh₃, and a carbon‐supported phase‐transfer catalyst (PTC). Selectivity as high as 100% is achieved with chlorotoluenes. It is realized that the supported PTC has a predominant role in minimizing the rate of the hydrodehalogenation reaction. The reaction is found to be selective only when homogeneous PdCl₂ is applied as the catalyst, whereas heterogeneous Pd/C‐catalyst selectively reduces chloroarenes to arenes under similar conditions. The role of PPh₃ is discussed and the effects of different process parameters such as temperature, PdCl₂ loading, PPh₃ to PdCl₂ ratio, amount of supported PTC, and solvents have been examined. A mechanism is proposed which is in good agreement with the experimental results obtained.     

Simulation of abrasive flow machining process for 2D and 3D mixture models

Improvement of surface finish and material removal has been quite a challenge in a finishing operation such as abrasive flow machining (AFM). Factors that affect the surface finish and material removal are media viscosity, extrusion pressure, piston velocity, and particle size in abrasive flow machining process. Performing experiments for all the parameters and accurately obtaining an optimized parameter in a short time are difficult to accomplish because the operation requires a precise finish. Computational fluid dynamics (CFD) simulation was employed to accurately determine optimum parameters. In the current work, a 2D model was designed, and the flow analysis, force calculation, and material removal prediction were performed and compared with the available experimental data. Another 3D model for a swaging die finishing using AFM was simulated at different viscosities of the media to study the effects on the controlling parameters. A CFD simulation was performed by using commercially available ANSYS FLUENT. Two phases were considered for the flow analysis, and multiphase mixture model was taken into account. The fluid was considered to be a Newtonian fluid and the flow laminar with no wall slip.     

Electro-conductive Palmyra Fibers By In Situ Polymerization of Pyrrole

Palmyra (Borassus flabellifer L.) is one of the natural fruit fibers that are available in plenty. This fiber has many advantages, such as biodegradability, renewability, low density, and low cost, which offer greater opportunities to develop new applications. Imparting electrical conductivity to this fiber may open up avenues for various novel applications. In the present study, Palmyra fibers are made electro-conductive by in situ chemical polymerization of pyrrole with FeCl₃ oxidant and PTSA dopant. Prepared electro-conductive fibers show average electrical resistivity 2.96 kΩ cm^?1. A positive correlation is found between fiber-length and electrical resistance, whereas a negative correlation is found in between fiber-diameter and electrical resistance. FTIR study is conducted to understand the chemical interaction between lingo-cellulose and polypyrrole. Tensile properties and thermal degradation behavior of the prepared electro-conductive fibers are evaluated, and significant deterioration of both tensile properties and thermal stability is observed. Due to this reason, these electro-conductive fibers are unsuitable for mechanical processing and high-tech applications. But the response of these fibers in different pH solution is investigated, and their possible application as a pH sensor has been explored.     

A scanning electron microscopic study on the cephalic cuticular sensillae of different larval stages of Antheraea assamensis,an indigenous silkworm species of Northeast India

Scanning electron microscopy revealed the presence of a number of cuticular sensillae on the head of different larval stages of the “Muga” silk moth, Antheraea assamensis. These include four types of sensilla trichodea, bead‐like folded sensilla, two types of sensilla basiconica, and sensory pegs. The study seems to be the first attempt in describing the morphology and distribution pattern of the cephalic cuticular sensillae of different larval stages of the silk moth Antheraea assamensis, an indigenous species of Northeast India. The possible significance of the sensillae in searching behavior of the larval stages during feeding is discussed with the help of available literature. Microsc. Res. Tech., 2009. © 2009 Wiley‐Liss, Inc.     

Scanning electron microscopic studies on surface microstructural features of some tissues of epizootic ulcerative syndrome‐affected Puntius ticto (Hamilton, 1822) from Southern Assam of India

Epizootic ulcerative syndrome (EUS)‐affected Puntius ticto exhibited a number of abnormalities in scale, gill, skin, and muscle at surface microstructural level. Lepidontal damage including breakage of individual lepidonts and complete loss of lepidontal assembly was evident in the scale. Disturbances in the gill included fusion of gill–lamella, distortion of lamellar surface, damage of primary and secondary gill lamella as well as breakage of gill racker. The skin of EUS‐affected Puntius ticto showed breakage of epidermal cell boundary, distortion, and loss of alignment of cells including lesions at places. Loss of alignment of muscles along with breakage and distortion of individual fibers was also evident. The similarities of these abnormalities in EUS‐affected Puntius ticto with those of pesticide and other pollutant toxicity reported in some fish is discussed with the help of relevant literature. Microsc. Res. Tech., 2009. © 2008 Wiley‐Liss, Inc.     

Toxic effect of environmental acid-stress on the sperm of a hill-stream fish Devario aequipinnatus: a scanning electron microscopic evaluation

Environmental stress due to acidic pH of water was found to be one of the major factors leading to toxic effects on the sperm of a hill-stream fish Devario aequipinnatus of Meghalaya, India. The Scanning Electron Microscopy of the transverse section of testes of the fish collected from its natural habitat with acidic pH (5.6-6.0) showed that the sperms were clumped together and their tails were either absent or were of extremely small length. The acrosome and midpiece were also not well differentiated. When the fingerlings from the natural habitat were reared to maturity in aquarium with water from natural habitat after changing the pH to alkaline range (8.0-8.2), the clumping of the sperm was not observed. The sperm tail was found to be well-developed along with well-differentiated acrosome and midpiece. Since the only change in the water quality parameters of the experimental aquarium as compared to those of the natural habitat was the pH, it is evident that the abnormal features of the sperm observed in fish from natural habitat is mainly because of environmental acid stress.     

Kinetics of phase transfer catalyzed reduction of nitrochlorobenzenes by aqueous ammonium sulfide: Utilization of hydrotreater off-gas for the production of value-added chemicals

The reduction of nitrochlorobenzenes (NCBs) was carried out in an organic solvent, toluene, under liquid–liquid mode with phase transfer catalyst, tetrabutylammonium bromide (TBAB). The selectivity of chloroanilines (CANs) was found to be 100%. The reaction rate of m-nitrochlorobenzene (MNCB) was found to be highest among the three NCBs followed by o- and p-nitrochlorobenzene (ONCB and PNCB). The reactions were found to be kinetically controlled with apparent activation energies of 22.8, 19.6 and 9.4 kcal/mol for ONCB, PNCB and MNCB, respectively. The effects of different parameters such as TBAB concentration, NCB concentration, sulfide concentration, ammonia concentration, and elemental sulfur loading on the conversion and reaction rate of NCBs were studied to establish the mechanism of the reaction. The rate of reaction of NCBs was found to be proportional to the concentrations of the catalyst and NCBs and to the cube of the concentration of sulfide. A generalized empirical kinetic model was developed to correlate the experimentally obtained conversion versus time data for the three NCBs.     

Effect of substrate bias voltage on the properties of diamond-like carbon thin films deposited by microwave surface wave plasma CVD

Diamond-like carbon (DLC) thin films were deposited on silicon and ITO substrates with applying different negative bias voltage by microwave surface wave plasma chemical vapor deposition (MW SWP-CVD) system. The influence of negative bias voltage on optical and structural properties of the DLC film were investigated using X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. Optical band gap of the films decreased from 2.4 to 1.7 with increasing negative bias voltage (0 to − 200 V). The absorption peaks of sp³ CH and sp² CH bonding structure were observed in FT-IR spectra, showing that the sp²/sp³ ration increases with increasing negative bias voltage. The analysis of Raman spectra corresponds that the films were DLC in nature.     

Dextran-coated gold nanoparticles for the assessment of antimicrobial susceptibility

Bacteria rapidly evolve mechanisms to become resistant to antibiotics. Therefore, identifying an effective antibiotic or antibacterial agent and administering it at concentrations that will successfully prevent bacterial growth (antimicrobial susceptibility) is critical for health care decision making and vital for the battle against multi-drug-resistant bacteria. Currently, the determination of antimicrobial susceptibility requires at least 24 h. Herein, we describe a nanoparticle-based antimicrobial susceptibility assay based on the concanavalin A-induced clustering of dextran-coated gold nanoparticles, which sense the presence of available complex carbohydrates in bacterial suspension. Under conditions of bacterial growth inhibition, addition of concanavalin A results in the formation of extensive dextran gold nanoassemblies, which are facilitated by the presence of free carbohydrates in solution and result in large shifts in the surface plasmon band of the nanoparticles. Meanwhile, at conditions of increased bacterial growth, a decrease in the amount of free carbohydrates in solution will occur due to an increased carbohydrate uptake by the proliferating bacteria. This will result in a decrease in the size of the gold nanoparticle clusters and an increase in the number of nanoparticles that bind to bacterial surface carbohydrates, causing lower shifts in the plasmonic band. The gold nanoparticle-based assessment of antimicrobial susceptibility yields results within 3 h and can be used for the high-throughput screening of samples during epidemics and identification of potential antimicrobial agents to expedite clinical decision-making in point-of-care diagnostics.