Nonisothermal crystallization kinetics of carbon nanotubes containing segmented polyurethane elastomer

Nanocomposites of the segmented polyurethane (SPU) elastomer with different concentrations of multiwall carbon nanotubes (MWCNTs) have been prepared. Scanning electron microscopy has been used to visualize the surface morphology and distribution of the nanotubes inside the matrix. Differential scanning calorimetry has been utilized to investigate the effects of MWCNTs on the crystallization characteristics of the SPU by collecting data at four cooling rates namely 5, 10, 15, and 20°C/min in the temperature range between 200°C to ambient. The results reveal that MWCNTs act as effective nucleating agent for crystallization of the hard segment of SPU and advance the onset and peak temperatures of crystallization by 38 and 23°C, respectively. The associated enthalpy and extent of crystallization are also increased by 34%. Different crystallization kinetic parameters have been calculated using both modified Avrami and combined Ozawa‐Avrami models to suggest a three dimensional growth of crystallization of SPU and its nanocomposites. The activation energy has been calculated using Kissinger method, which indicates that activation energy decreases with increasing concentration of MWCNTs. The calorimetric results have further been correlated with thermomechanical analysis and glass transition temperature of the nanocomposites corresponding to soft segment is found to increase by 20°C. POLYM. ENG. SCI., 56:1248–1258, 2016. © 2016 Society of Plastics Engineers     

Microstructure and Mechanical Property Correlation of Mg-Si Alloys

Silicon - The present work aims at understanding the microstructure and mechanical property correlation of hypo (Mg-0.5, 0.7, 1.15 wt% Si) and hyper (Mg-2, 4, 6, 8 and 10 wt% Si) eutectic binary...     

Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin‐film solar cells consisting of earth‐abundant and non‐toxic materials were made from pulsed chemical vapor deposition (pulsed‐CVD) of SnS as the p‐type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n‐type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post‐deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of the compatibilizer,on the engineering properties of TPV based on Hypalon® and PP prepared by dynamic vulcanization

Elastomeric Chlorosulfonated polyethylene (Hypalon^®) and thermoplastic Polypropylene (PP) based thermoplastic vulcanizates (TPVs) were prepared in presence of different doses of compatibilizer, maleic anhydride grafted PP (PP‐g‐MA) by employing dynamic vulcanization technique. The effect of incorporation in different proportions of compatibilizer on mechanical, spectral, morphological, thermal, and rheological properties of such TPVs was studied and the same were compared to that of virgin PP and amongst themselves. The mechanical analysis of the prepared TPVs exhibited significant improvements in stress at 25% modulus, ultimate tensile strength (UTS), and hardness values. FTIR studies revealed that a chemical interaction had taken place between Hypalon^® and functionalized compatibilizer during the process of dynamic vulcanization which led to an enhancement of interfacial adhesion between them. The two‐phase morphologies were clearly observed by scanning electron microscopic studies. The T_g values of Hypalon^® was modified in the TPVs as exhibited by differential scanning calorimetric studies. TGA studies indicated the increase in thermal stability of all TPVs with respect to the elastomeric Hypalon^®. Rheological properties showed that the compatibilizer reduces the melt viscosity of TPVs and thus facilitates the processibility of such TPVs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40312.     

Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor

Liquid polycarbosilane (LPCS) derived hard coatings of silicon carbide (SiC) were deposited on Inconel alloy at three different moderately high temperatures by chemical vapour deposition. The deposited films were characterized by X-ray diffractometry and Field emission scanning electron microscopy. Liquid PCS yielded a mixture of α-SiC and β-SiC during decomposition having uniform round-shaped particles of dimension around 200–300 nm without extensive cracking and few discrete shaped particles were also found to form at higher temperature (i.e. 1100 °C and 1200 °C) deposited films. The coated samples showed substantial increment in hardness and fracture toughness as compared to the uncoated sample. The fracture toughness (K_IC) values of the deposited films were in the range of 6.7–10.7 MPa(m)^1/2. The tribological properties and hardness of the films were also found to vary with deposition temperature. The scratch tracks of the films revealed that brittle failures occurred in all SiC coated substrates.     

Whole Body Ip6k1 Deletion Protects Mice from Age-Induced Weight Gain,Insulin Resistance and Metabolic Dysfunction

(1) Background: We previously demonstrated that disruption of IP6K1 improves metabolism, protecting mice from high-fat diet-induced obesity, insulin resistance, and non-alcoholic fatty liver disease and steatohepatitis. Age-induced metabolic dysfunction is a major risk factor for metabolic diseases. The involvement of IP6K1 in this process is unknown. (2) Methods: Here, we compared body and fat mass, insulin sensitivity, energy expenditure and serum-, adipose tissue- and liver-metabolic parameters of chow-fed, aged, wild type (aWT) and whole body Ip6k1 knockout (aKO) mice. (3) Results: IP6K1 was upregulated in the adipose tissue and liver of aWT mice compared to young WT mice. Moreover, Ip6k1 deletion blocked age-induced increase in body- and fat-weight and insulin resistance in mice. aKO mice oxidized carbohydrates more efficiently. The knockouts displayed reduced levels of serum insulin, triglycerides, and non-esterified fatty acids. Ip6k1 deletion partly protected age-induced decline of the thermogenic uncoupling protein UCP1 in inguinal white adipose tissue. Targets inhibited by IP6K1 activity such as the insulin sensitivity- and energy expenditure-inducing protein kinases, protein kinase B (PKB/Akt) and AMP-activated protein kinase (AMPK), were activated in the adipose tissue and liver of aKO mice. (4) Conclusions: Ip6k1 deletion maintains healthy metabolism in aging and thus, targeting this kinase may delay the development of age-induced metabolic dysfunction.     

Proliferation and Apoptosis Pathways and Factors in Oral Squamous Cell Carcinoma

Oral cancer is the most common form of head and neck squamous cell carcinoma (HNSCC) and most frequently presents as oral squamous cell carcinoma (OSCC), which is associated with an alarmingly high mortality rate. Internationally, a plethora of research to further our understanding of the molecular pathways related to oral cancer is performed. This research is of value for early diagnosis, prognosis, and the investigation of new drugs that can ameliorate the harmful effects of oral cancer and provide optimal patient outcomes with minimal long-term complications. Two pathways on which the progression of OSCC depends on are those of proliferation and apoptosis, which overlap at many junctions. Herein, we aim to review these pathways and factors related to OSCC progression. Publicly available search engines, PubMed and Google Scholar, were used with the following keywords to identify relevant literature: oral cancer, proliferation, proliferation factors, genes, mutations, and tumor suppressor. We anticipate that the use of information provided through this review will further progress translational cancer research work in the field of oral cancer.     

Self-Assembly and Neurotoxicity of β-Amyloid (21–40) Peptide Fragment: The Regulatory Role of GxxxG Motifs

The three GxxxG repeating motifs from the C-terminal region of β-amyloid (Aβ) peptide play a significant role in regulating the aggregation kinetics of the peptide. Mutation of these glycine residues to leucine greatly accelerates the fibrillation process but generates a varied toxicity profile. Using an array of biophysical techniques, we demonstrated the uniqueness of the composite glycine residues in these structural repeats. We used solvent relaxation NMR spectroscopy to investigate the role played by the surrounding water molecules in determining the corresponding aggregation pathway. Notably, the conformational changes induced by Gly³³ and Gly³⁷ mutations result in significantly decreased toxicity in a neuronal cell line. Our results indicate that G³³xxxG³⁷ is the primary motif responsible for Aβ neurotoxicity, hence providing a direct structure–function correlation. Targeting this motif, therefore, can be a promising strategy to prevent neuronal cell death associated with Alzheimer's and other related diseases, such as type II diabetes and Parkinson's.     

The effect of alkalization and fiber loading on the mechanical properties of bamboo fiber composites,Part 1: — Polyester resin matrix

Bamboo strips [10 cm × 1.5 cm × (1?1.5) mm] were treated with caustic solutions for 1 h at different concentrations e.g., 0, 10, 15, 20, and 25%. Bamboo strips reinforced polyester resin composites were fabricated by hand‐lay‐up technique using both alkali‐treated and untreated bamboo strips, using a room temperature curing system for the polyester resin. This study aims at the evaluation of the influence of caustic concentration on the mechanical properties of bamboo strips reinforced polyester resin composites at a constant 50% loading of reinforcement. Maximum improvement in property was achieved possibly with 20% of caustic treated strip reinforcements. Beyond 20%, there was degradation in all the strength properties because of failure in mechanical properties of the reinforcements itself. The effect of fiber loading variation upon mechanical properties was also studied. It was observed that superior mechanical properties were obtained with 60% filler loading. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009