Evaluation of Diluted and Undiluted Trickle-Bed Hydrotreating Reactor with Different Catalyst Volume

In this work, a comparative study on the combined effects of hydrodynamics and kinetics on the hydrodesulfurization (HDS) of a straight-run gas oil (SRGO) using a trickle-bed reactor with and without diluent (SiC) and different catalyst volume (0.1, 0.07, and 0.050 × 10^-3 m³, respectively) was carried out. The tests were conducted in a pilot plant under conditions close to those used in industrial-scale units (5492 kPa, 445.4 m³(STP)/m³ H₂/oil ratio, 623-643K, 0.9 and 2.5 h^-1 LHSV values). The catalyst used was a commercial CoMoP/Al₂O₃ formulation shaped as tri-lobed extrudates (1/20 in, nominal size) or as crushed particles (d_p = 1.2 × 10^-3 m). Contrarily to that usually claimed, the undiluted systems showed better performance than those comprising small diluent (SiC) particles (d_p ~ 5 × 10^-5 m). Calculations to evaluate hydrodynamic variables (plug-flow behavior, wall effects, wetting, and back-mixing) were carried out in order to explain the observed facts. The possible influences of the size of the diluent particles used are discussed.     

Multiple allocation hub-and-spoke network design under hub congestion

The multiple allocation hub-and-spoke network design under hub congestion problem is addressed in this paper. A non-linear mixed integer programming formulation is proposed, modeling the congestion as a convex cost function. A generalized Benders decomposition algorithm has been deployed and has successfully solved standard data set instances up to 81 nodes. The proposed algorithm has also outperformed a commercial leading edge non-linear integer programming package. The main contribution of this work is to establish a compromise between the transportation cost savings induced by the economies of scale exploitation and the costs associated with the congestion effects.     

Assessment of Cell Disruption and Carotenoids Extraction from Sporidiobolus salmonicolor (CBS 2636)

The increasing demand for carotenoids by industries has drawn attention to their bio-production. Since pigments are intracellular, extraction steps are then needed after cell cultivation. In this work, different strategies for extraction of carotenoid pigments from Sporidiobolus salmonicolor (CBS 2636) were studied. Different solvents (dimethyl sulfoxide, petroleum ether, hexane, ethyl acetate, chloroform, and acetone), liquid N₂, and diatomaceous earth were used to disrupt the cell and thus release the intracellular carotenoids. The results of this study showed that when multiple solvents were used, a synergistic effect on the extent of carotenoids recovery was obtained. Maximum concentration of total carotenoids (913 μg/L) was obtained in the treatment using liquid N₂ and dimethyl sulfoxide to disrupt the cell, followed by the extraction with a solution of acetone/methanol (7:3, v/v).     

Occurrence of C16:1 isomers in milk fats from ewes fed with different dietary lipid supplements

The trans as well as the cis C16:1 isomer profiles were established in 43 ewe milk fats supplemented with different dietary lipid sources representative of the variety of unsaturated fatty acids found in nature such as olive, sunflower, linseed and fish oils. Fractionation by silver-ion solid phase extraction facilitated a rapid separation of the trans, cis and saturated FA before gas chromatography analysis took place. C16:1 isomers with a double bond in positions 7, 9 and 13 in the cis group and 8 and 9 in the trans fraction were the most abundant. Dietary lipid supplementation produced a noticeable increase in the total trans C16:1 content and elevated correlations were observed between trans-8 C16:1 and trans-10 C18:1 as well as trans-9 C16:1 and trans-11 C18:1. These results support the idea that altering the trans C18:1 profile affects trans C16:1 isomer composition consistent with the β-oxidation products from the trans C18:1 isomers.     

Residual effect of atomised water vapour treatment on carbohydrate metabolism during ripening of cv “Fino de Jete” cherimoya fruit

Atomised hot water vapour at between 46 and 54 °C for 60 min was tested as a method of delaying ripening and extending shelf life in cv “Fino de Jete” cherimoya fruit (Annona cherimola Mill.). Heat treatment at 46 °C stimulated the respiration rate and starch degradation, induced ethylene production, increased the accumulation of soluble sugars and α-amylase activity, and moved the onset of ethylene production (OEP) forward. Treatment at 50 °C, and especially at 52 °C, delayed the climacteric peak and the OEP, decreased sugar and organic acid accumulation, and reduced α-amylase and invertase activity. The results obtained indicate that temperatures higher than 48 °C slowed physiological processes and carbohydrate metabolism and extend the shelf life of the cherimoya fruits, while temperatures higher than 52 °C blocked ripening irreversibly.     

Functional properties and possible uses of a hydrolysate of pepitona (Arca zebra) in the preparation of foods

The present study revealed that the drum-drying and spray-drying procedures used on the pepitona (Arca zebra) hydrolysate, as well as the storage time, exert a deteriorative significant effect on the functional properties of both hydrolysates. The greatest and more significant losses of the majority of such properties occur during the first two months of storage period. Thus, in the case of foaming capacity, losses ranging from 17% to 34% were detected in the drum-dried hydrolysate, and of 38% to 49% in the hydrolysate dehydrated using a spray drier, during the first two months of storage. The emulsifying capacity was also altered in 14% of the hydrolysate dehydrated in a drum drier, and in 25% of the hydrolysate dehydrated using a spray drier. Sensory evaluation tests demonstrated the potential of both hydrolysates for use as supplements of conventional foods such as cookies and extruded products.     

Angiotensin-I-converting enzyme inhibitory activity and bitterness of enzymatically-produced hydrolysates of shrimp (Pandalopsis dispar) processing byproducts investigated by Taguchi design

The importance of water-to-substrate ratio, protease type, percent enzyme and incubation time on hydrolysates produced from shrimp processing byproducts was investigated using Taguchi’s L₁₆ (4⁵) experimental design. Protease type significantly (p < 0.05) influenced soluble yield, degree of hydrolysis (DH), angiotensin-I-converting enzyme (ACE) inhibitory activity and bitterness of hydrolysates, while percent enzyme only affected the DH. Hydrolysates produced by Alcalase and Protamex possessed strong ACE inhibitory activity (IC₅₀ = 100–200 μg/ml and 70 μg/ml, respectively), accompanied by high yield, high DH and strong bitterness. Furthermore, ACE inhibition was positively correlated (r² = 0.87) with bitterness of the hydrolysates. Fractionation by size-exclusion chromatography revealed that the bitter substances, which also showed strong ACE inhibition, were <3 kDa in size and contained many hydrophobic residues, including Tyr, Phe, Leu, Ile, Val and Lys. Despite the bitterness, these hydrolysates may have potential health benefits, arising from their potent ACE inhibitory activity.     

GaAs-based modulation-doped quantum-well infrared photodetectors for single- and two-color detection in 3-5 /spl mu/m

Double-barrier quantum-well infrared photodetectors are promising for operation in the midinfrared region. In this paper, we present a series of novel molecular beam epitaxy (MBE)-grown devices based on modulation-doped (MD) AlGaAs-AlAs-GaAs structures that exhibit a remarkable responsivity at zero bias (0.05 A/W) at 4.6 /spl mu/m. Since the photovoltaic properties are strongly dependent on the symmetry of the potential profile, we have systematically varied the position of the dopant in the barriers for a series of single-color detectors. Low-temperature photocurrent spectra and current-voltage (I-V) characteristics (in the dark and under illumination) show that the location of the dopant is a relevant design parameter, due to its role in the photovoltaic behavior (i.e., the presence or absence of zero bias signal). The performance of the MD devices is compared with that of a detector with doping in the center of the well and otherwise the same structure. In particular, the responsivity and detectivity seem to be higher for the MD detectors than for well-doped samples, especially when the dopant is located in the barrier closest to the substrate. Therefore, we have chosen that MD dopant profile when designing and growing, to our knowledge, the first 3-5 /spl mu/m two-color detector, with simultaneous detection at 3.8 and 4.4 /spl mu/m.     

Modelling and management of smart microgrid for rural electrification in sub-saharan Africa: The case of Nigeria

Access to electricity is still a challenge in many parts of sub-Saharan Africa. In Nigeria, over 70% of the rural dwellers do not have access to electricity. The purpose of this paper is to examine the potential of a smart microgrid for off-grid rural electrification in Nigeria. A combination of design thinking and model-based design methodology is employed to select a suitable microgrid configuration and to develop a smart microgrid model. A system consisting of a solar photovoltaic array, battery energy storage and a diesel generator is selected, and the model is developed in Simulink. Demand data from 10 rural communities in Nigeria are used to validate the performance of the model and the potential for demand management is considered. The use of energy efficient light bulbs is found to reduce the peak electricity demand of the case study communities by 42 to 76%. Combining the proposed system with the use of LED bulbs makes the system to have 56 to 81% less net present cost than a system with a diesel generator alone and incandescent light bulbs. The proposed smart microgrid is found to be more suitable for off-grid rural electrification in Nigeria than diesel generators which are currently used for off-grid electrification in Nigeria.