Gamma‐ray irradiation effect of polyethylene on dimaleimides as a class of new multifunctional monomers

Multifunctional monomers, m‐xylylenedimaleimide, p‐phenylenedimaleimide, m‐phenylenedimaleimide, and p‐phenylenedinadimide, all of which have maleimide groups, were synthesized to increase thermal and radiation stabilities. The synthesized multifunctional monomers showed good compatibility with low‐density polyethylene (LDPE). Mixtures of LDPE and these multifunctional monomers were irradiated with γ‐rays from a Co‐60 source at room temperature in a nitrogen atmosphere. The absorbed dose ranged from 0 to 160 KGy. Among these multifunctional monomers, m‐xylylenedimaleimide was the best in gel fraction enhancement. Crosslinked LDPE with m‐xylylenedimaleimide displayed a higher modulus than that of crosslinked LDPE with triallyl cyanurate. For the elongation property, LDPE with m‐xylylenedimaleimide as a multifunctional monomer showed better results than that with commercial multifunctional monomers such as triallyl cyanurate (TAC) and trimethylol propane triacrylate (TMPTA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2339–2345, 2003     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Constraint release effects on the dynamics of polymer melts

The dynamical behavior of polymers with molecular weight distribution is analyzed from the standpoint of reptation and tube renewal. In a binary blend where the entanglements between longer chains are prominent, the shorter chain relaxes only by reptation, whereas the longer chain shows more complex behavior, i.e., reptation in the original tube, short-range tube renewal causing the tube enlargement, and thereafter reptation again in the expanded tube. Dynamic moduli data from literature are used for determining the compositional dependence of the relaxation times. Also on the basis of the relaxation mechanism considered here, the critical composition due to the onset of entanglements between different longer chains is proposed as a function of their component molecular weighl ratio.     

Rotational diffusion coefficient of rod-like polymer with a slight flexibility in semidilute and concentrated solutions

Summary A confined stiff chain model is suggested for the prediction of the rotational diffusion coefficient of a rigid rodlike polymer with a slight flexibility above the region of dilute solution (c1/L³). It shows a fairly good agreement with the experimental data of various polymers. Among them, PBLG and PBT with more rigidity are more consistent with the model when the log-jamming effect is considered. The predicted rotational diffusivity shows approximately the inverse seventh-power of length, which is less than 9 of Doi-Edwards tube model, but larger than the experimental value 5.7 of M-virus, while it shows the inverse power of concentration is a little larger than the value 2 of tube model except for the rodlike virus M-13.     

Preparation and characterization of eugenol‐grafted chitosan hydrogels and their antioxidant activities

The hydrogels composed of chitosan and eugenol were prepared to enhance and sustain antioxidant activities. The vinyl groups of eugenol monomer were directly grafted on the amino groups of chitosan, using ceric ammonium nitrate. The graft of eugenol onto chitosan was confirmed by using Fourier‐transform infrared and proton nuclear magnetic resonance spectroscopies. Results from the swelling behavior, thermal stability, and wide‐angle X‐ray diffraction revealed that the equilibrium water content decreased with increase of graft yields, because of the hydrophobicity of eugenol, although the introduction of eugenol as a side chain disturbed the ordered arrangement of chitosan's crystalline structure. The eugenol‐grafted chitosan hydrogels showed lower pH sensitivity in comparison with chitosan alone, because the amino groups, which were pH sensitive, of chitosan were grafted with eugenol. The scavenging activity of the tested hydrogels increased with graft yield of eugenol, because phenolic groups in the eugenol could play a major role as potent free‐radical terminators, in the results of improved antioxidant activity in eugenol‐grafted chitosan hydrogel in comparison with chitosan alone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3500–3506, 2006     

Preparation and characterization of polypropylene/layered silicate nanocomposites using an antioxidant

Polypropylene (PP)/layered silicate nanocomposites were prepared via simple melt mixing of three components, PP, layered silicates modified with octadecylamine (C18-MMT) and antioxidant, to investigate the role of antioxidant. TEM and X-ray scattering results confirmed the intercalated state of silicates in PP/layered silicate nanocomposites with antioxidant. In rheological and mechanical study, the nanocomposites with antioxidant showed higher properties than those of the unfilled PP. The nanocomposite with 5 wt% C18-MMT and 0.5 phr antioxidant exhibited about 1.4 times higher tensile modulus and 1.3 times higher storage modulus than the unfilled PP. However, PP/C18-MMT without antioxidant showed lower rheological values owing to the thermal decomposition of PP and the poor compatibility between PP and C18-MMT. It could be concluded that antioxidants played an important role in enhancing the compatibility between PP and C18-MMT. According to the real time X-ray diffraction, the nanocomposite showed the weak ordering of PP crystals than the unfilled PP in the load-extension plateau region of elongation.     

Effects of Acetic Acid on the Crystallization Temperature of Sol–Gel-Derived MgO Nano-Powders and Thin Films

The influences of acetic acid addition to Mg-methoxide on the stability of the precursor and the crystallization behavior of sol–gel-derived MgO nano-powders and thin films were investigated using X-ray powder diffraction, transmission electron microscopy, Fourier-transformed infrared spectroscopy, and thermogravimetry. The addition of acetic acid enhanced the stability of the alkoxide against precipitation. Moreover, during postheat treatment of the gel powders treated with acetic acid, a significantly lowered crystallization temperature (250°C) was observed as compared to the untreated counterpart (350°C). The low-temperature crystallization of MgO, induced by the modification of Mg-methoxide with acetic acid, was related to the decomposition of organics at a lower temperature. These results could be explained in terms of the decrease of the O–R bond strength depending on the increase in the alkyl group size. MgO thin films having a high degree of crystallinity were successfully obtained from the Mg-methoxide treated with acetic acid at 300°C. The low-temperature crystallization of sol–gel-derived MgO thin films showed the feasibility for their application as a protective layer in alternative current plasma display panel cells.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Electrical properties of (Bi3.5La0.5)Ti3O12 thin-films prepared by liquid source misted chemical deposition

The ((Bi_3.5La_0.5)Ti₃O₁₂(BLT) thin-films used in this study were fabricated on a Pt(111)/SiO₂/Si(100) substrate by a Liquid Source Misted Chemical Deposition (LSMCD) technique. X-ray diffraction patterns showed that the BLT films were crystallized and no other phases were observed when annealed above 650 ‡C. Grain size and remnant polarizations increased with increase in the annealing temperature, while leakage current densities decreased. The remnant polarizations (Pr) increased from 2.0 to 4.8 and 19.0 μC/cm2 with increase in the annealing temperature from 650 to 700 and 750 ‡C, respectively. The BLT films annealed at 700 ‡C in O₂ showed a good fatigue resistance of reduced polarization by 10% after 10⁹ switching cycles when 9 V of bipolar voltage was applied at a frequency of 40 kHz.     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.