Systematic Study of Widely Applicable N‐Doping Strategy for High‐Performance Solution‐Processed Field‐Effect Transistors

A specific design for solution‐processed doping of active semiconducting materials would be a powerful strategy in order to improve device performance in flexible and/or printed electronics. Tetrabutylammonium fluoride and tetrabutylammonium hydroxide contain Lewis base anions, F^? and OH^?, respectively, which are considered as organic dopants for efficient and cost‐effective n‐doping processes both in n‐type organic and nanocarbon‐based semiconductors, such as poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)] (P(NDI2OD‐T2)) and selectively dispersed semiconducting single‐walled carbon nanotubes by π‐conjugated polymers. The dramatic enhancement of electron transport properties in field‐effect transistors is confirmed by the effective electron transfer from the dopants to the semiconductors as well as controllable onset and threshold voltages, convertible charge‐transport polarity, and simultaneously showing excellent device stabilities under ambient air and bias stress conditions. This simple solution‐processed chemical doping approach could facilitate the understanding of both intrinsic and extrinsic charge transport characteristics in organic semiconductors and nanocarbon‐based materials, and is thus widely applicable for developing high‐performance organic and printed electronics and optoelectronics devices.     

Transforming One‐Dimensional Nanowalls to Long‐Range Ordered Two‐Dimensional Nanowaves: Exploiting Buckling Instability and Nanofibers Effect in Holographic Lithography

Two‐dimensional nanowaves with long‐range order are fabricated by exploiting swelling‐induced buckling of one‐dimensional (1D) nanowalls with nanofibers formed in‐between during holographic lithography of the negative‐tone photoresist SU‐8. The 1D film goes through a constrained swelling in the development stage, and becomes buckled above the critical threshold. The degree of lateral undulation can be controlled by tuning the pattern aspect ratio (height/width) and exposure dosage. At a high aspect ratio (e.g., 6) and a high exposure dosage, nanofibers (30–50 nm in diameter) are formed between the nanowalls as a result of overlapping of low crosslinking density regions. By comparing experimental results with finite‐element analysis, the buckling mechanism is investigated, which confirms that the nanofibers prevent the deformed nanowalls from recovery to their original state, thus, leading to long‐range ordered two‐dimensional (2D) wavy structures. The film with nanowaves show weaker reflecting color under an ambient light and lower transmittance compared to the straight nanowalls. Using double exposure through a photomask, patterns consisting of both nanowaves and nanowalls for optical display are created.     

Dissolution Behaviors and Applications of Silicon Oxides and Nitrides in Transient Electronics

Silicon oxides and nitrides are key materials for dielectrics and encapsulation layers in a class of silicon‐based high performance electronics that has ability to completely dissolve in a controlled fashion with programmable rates, when submerged in bio‐fluids and/or relevant solutions. This type of technology, referred to as “transient electronics”, has potential applications in biomedical implants, environmental sensors, and other envisioned areas. The results presented here provide comprehensive studies of transient behaviors of thin films of silicon oxides and nitrides in diverse aqueous solutions at different pH scales and temperatures. The kinetics of hydrolysis of these materials depends not only on pH levels/ion concentrations of solutions and temperatures, but also on the morphology and chemistry of the films, as determined by the deposition methods and conditions. Encapsulation strategies with a combination of layers demonstrate enhancement of the lifetime of transient electronic devices, by reducing water/vapor permeation through the defects.     

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual‐feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are 28 mm × 28 mm × 4 mm, which is the most compact size among the dual‐band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).     

Chemically Recyclable Conjugated Polymer and One-Shot Preparation of Thermally Stable and Efficient Bulk-Heterojunction from Recycled Monomer

Recyclable conjugated polymers are important for realizing eco-friendly electronics with advantages of solution processability and flexibility. A recyclable conjugated polymer, PY-TIP is developed, of which a key monomer is successfully extracted via a mild depolymerization process and is reused for the synthesis of novel conjugated polymers. One-shot preparation of polymer acceptor and its bulk-heterojunction (BHJ) is demonstrated from the recycled monomer, Y5-TA, for the first time and the resulting BHJ film shows optimal nanoscale morphology for efficient charge generation and transport. As a result, the solar cells prepared using the BHJ film show a higher efficiency of 13.08% and much improved thermal and mechanical stability compared with those based on the small molecular acceptor. These results are important in that the various polymers can be prepared from the recycled monomer in a solid state without organic solvents and purification step and this strategy is effective for improving the thermal and mechanical stability of the BHJ film as well as achieving high photovoltaic performance. PY-TIP is exemplary in that it can reproduce its monomer which can be used to synthesize conjugated polymers with novel chemical structures and physical properties. This work provides a design guideline for developing recyclable conjugated polymers with dynamic covalent bonds.     

ECG measurement on a chair without conductive contact

For the purpose of long-term, everyday electrocardiogram (ECG) monitoring, we present a convenient method of ECG measurement without direct conductive contact with the skin while subjects sat on a chair wearing normal clothes. Measurements were made using electrodes attached to the back of a chair, high-input-impedance amplifiers mounted on the electrodes, and a large ground-plane placed on the chair seat. ECGs were obtained by the presented method for several types of clothing and compared to ECGs obtained from conventional measurement using Ag-AgCl electrodes. Motion artifacts caused by usual desk works were investigated. This study shows the feasibility of the method for long-term, convenient, everyday use.     

Transmission of Traffic Information Using a Terrestrial Digital Multimedia Broadcasting System

This letter introduces an efficient transmission of traffic information through a terrestrial digital multimedia broadcasting system, which is a multimedia and mobility empowered option of the European digital audio broadcasting system. By adapting Korean characteristic traffic information into the transport protocol expert group messages in the traffic information delivery, a highly efficient traffic information system was implemented and tested in Korea.     

Biodegradable Thin Metal Foils and Spin‐On Glass Materials for Transient Electronics

Biodegradable substrates and encapsulating materials play critical roles in the development of an emerging class of semiconductor technology, generally referred as “transient electronics”, whose key characteristic is an ability to dissolve completely, in a controlled manner, upon immersion in ground water or biofluids. The results presented here introduce the use of thin foils of Mo, Fe, W, or Zn as biodegradable substrates and silicate spin‐on‐glass (SOG) materials as insulating and encapsulating layers, with demonstrations of transient active (diode and transistor) and passive (capacitor and inductor) electronic components. Complete measurements of electrical characteristics demonstrate that the device performance can reach levels comparable to those possible with conventional, nontransient materials. Dissolution kinetics of the foils and cytotoxicity tests of the SOG yield information relevant to use in transient electronics for temporary biomedical implants, resorbable environmental monitors, and reduced waste consumer electronics.     

Materials and Wireless Microfluidic Systems for Electronics Capable of Chemical Dissolution on Demand

Electronics that are capable of destroying themselves, on demand and in a harmless way, might provide the ultimate form of data security. This paper presents materials and device architectures for triggered destruction of conventional microelectronic systems by means of microfluidic chemical etching of the constituent materials, including silicon, silicon dioxide, and metals (e.g., aluminum). Demonstrations in an array of home‐built metal‐oxide‐semiconductor field‐effect transistors that exploit ultrathin sheets of monocrystalline silicon and in radio‐frequency identification devices illustrate the utility of the approaches.