Steganalysis of Network Packet Length Based Data Hiding

Recently, data hiding by modifying network parameters like packet header, payload, and packet length has become popular among researchers. Different algorithms have been proposed during the last few years which have altered the network packets in different ways to embed the data bits. Some of these algorithms modify the network packet length for embedding. Although most of the packet length based embedding schemes try to imitate the normal network traffic distribution, they have altered the statistical distribution of network packet lengths during embedding. These statistical anomalies can be exploited to detect such schemes. In this paper, a second order detection scheme for packet length based steganography has been proposed. A comprehensive set of experiments have been carried out to show that the proposed detection scheme can detect network packet length based steganography with a considerably high accuracy.     

Variation of optical band gap in anodically grown nanocrystalline ZnO thin films at room temperature—effect of electrolyte concentrations

Zinc oxide thin films were deposited by electrochemical oxidation of Zinc at room temperature using high purity Zn as anode, Pt cathode, a calomel reference electrode and an aqueous electrolytic solution of oxalic acid. A range of 0.3, 0.1, 0.05, and 0.01 M electrolyte concentrations were used during anodization. Glancing angle X-ray diffraction and field emission scanning electron microscope were used to determine the crystallinity and the surface morphology respectively of the deposited ZnO thin films. The variation of the molar concentration of the electrolyte during anodic oxidation had a significant effect on the optical band gap of ZnO thin film. There was an increase in band gap with the decreasing concentrations of oxalic acid and a highest bandgap of 4.20 eV was obtained by using 0.05 M oxalic acid electrolyte. An apparent blue shift of band gap was further confirmed by Photoluminescence spectra.     

Meshfree co‐rotational formulation for two‐dimensional continua

In this paper, a meshfree co‐rotational formulation for two‐dimensional continua is proposed. In a co‐rotational formulation, the motion of a body is separated into rigid motion and strain‐producing deformation. Traditionally, this has been done in the setting of finite elements for beams and shell‐type elements. In the present work every node in a meshfree discretized domain has its own co‐rotating coordinate system. Three key ingredients are established in order to apply the co‐rotational formulation: (i) the relationship between global and local variables, (ii) the angle of rotation of a typical co‐rotating coordinate system, and (iii) a variationally consistent tangent stiffness matrix. An algorithm for the co‐rotational formulation based on load control is provided. Maximum‐entropy basis functions are used to discretize the domain and stabilized nodal integration is implemented to construct the global system of equations. Numerical examples are presented to demonstrate the validity of the meshfree co‐rotational formulation. Copyright © 2009 John Wiley & Sons, Ltd.     

Competition between Electronic Cooling and Andreev Dissipation in a Superconducting Micro-Cooler

We discuss very low temperature experiments on superconducting micro-coolers made of a double Normal metal–Insulator–Superconductor junction. We investigate with a high resolution the differential conductance of the micro-cooler as well as of additional probe junctions. There is an explicit crossover between the single quasi-particle current and the phase-coherent Andreev current. We establish a thermal model by considering the thermal contribution due to the Andreev current. The related increase of the electron temperature is discussed, including the influence of several parameters like the phase-coherence length or the tunnel junction transparency.     

High-performance polymer films. III. Preparation and characterization

A series of polyimide and copolyimide films were prepared by film casting, drying, and thermal imidization from the respective precursor poly(amic acid) (PAA) and copoly(amic acid) solutions derived from two dianhydrides, pyromellitic dianhydride (PMDA) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), and two diamines, 4,4′-oxydianiline (ODA) and a proprietary aromatic diamine (PD) as monomers. Depending on the solution's inherent viscosity value (molecular weight) and the nature of the polymer chains (derived from rigid or flexible monomers), precursor poly(amic acid) and copoly(amic acid) solution concentrations of 8–12% (w/w) were found to be suitable for the preparation of good quality polyimide/copolyimide films. The recovery of film toughness and creasability from the brittleness at the intermediate temperature of the cure cycle depended not only on the molecular weight of the precursor poly(amic acids)/copoly(amic acids) but also on their chain flexibility. The poly(amic acid) derived from both rigid dianhydride and diamine practically gave rise to a brittle film of polyimide even after curing to 360°C. The resulting polyimide and copolyimide films were compared with Du Pont's Kapton H film. The density of the films was in the range 1.39–1.42 g/cm³. The thickness of most of the films was in the range 20–30 μm. The HPF 3 film, based on PMDA–PD, appeared to be highly colored (reddish brown), and the HPF 2 film, based on BTDA–ODA, had the lightest yellow coloring among the films in this investigation, including Kapton H film. HPF 2, HPF 6, and HPF 8 films were more amorphous than the other films. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 976–988, 2001     

A Case Study on Optimization of Biomass Flow During Single-Screw Extrusion Cooking Using Genetic Algorithm (GA) and Response Surface Method (RSM)

In the present study, response surface method (RSM) and genetic algorithm (GA) were used to study the effects of process variables like screw speed, rpm (x ₁), L/D ratio (x ₂), barrel temperature (°C; x ₃), and feed mix moisture content (%; x ₄), on flow rate of biomass during single-screw extrusion cooking. A second-order regression equation was developed for flow rate in terms of the process variables. The significance of the process variables based on Pareto chart indicated that screw speed and feed mix moisture content had the most influence followed by L/D ratio and barrel temperature on the flow rate. RSM analysis indicated that a screw speed?>?80 rpm, L/D ratio?>?12, barrel temperature?>?80 °C, and feed mix moisture content?>?20% resulted in maximum flow rate. Increase in screw speed and L/D ratio increased the drag flow and also the path of traverse of the feed mix inside the extruder resulting in more shear. The presence of lipids of about 35% in the biomass feed mix might have induced a lubrication effect and has significantly influenced the flow rate. The second-order regression equations were further used as the objective function for optimization using genetic algorithm. A population of 100 and iterations of 100 have successfully led to convergence the optimum. The maximum and minimum flow rates obtained using GA were 13.19?×?10^?7 m³/s (x ₁?=?139.08 rpm, x ₂?=?15.90, x ₃?=?99.56 °C, and x ₄?=?59.72%) and 0.53?×?10^?7 m³/s (x ₁?=?59.65 rpm, x ₂?=?11.93, x ₃?=?68.98 °C, and x ₄?=?20.04%).     

Electrochemical Study of Diffusion Bonded Joints between Micro-duplex Stainless Steel and Ti6A14V Alloy

In the present study,corrosion behavior of diffusion bonded joints formed between micro-duplex stainless steel(MDSS) and Ti6AI4V alloy(TiA)(at 900 ℃ for 60 min under 4 MPa uniaxial pressure in vacuum) was investigated in 1 mol/L HCI and 1 mol/L NaOH solutions using various electrochemical measurements such as open circuit potential(OCP),electrochemical impedance spectroscopy(EIS) and potentiodynamic polarization(PD).For comparison,corrosion behavior of base metals(MDSS and TiA) was also evaluated.Bonded joint was characterized by light optical microscopy and scanning electron microscopy using backscattered electron mode.The layer wise σ phase and λ + FeTi phase mixture has been observed at the bond interface and the bond tensile strength and shear strength were ~556.4 MPa and ~420.2 MPa,respectively.     

Study of a simulated stream machine for dataflow computation

In this paper, a stream-based dataflow architecture is proposed, and its simulation model, which has helped to evaluate the effectiveness of the proposed architectural concept, is discussed. The machine integrates the conventional Von Neumann type of control flow subsystem with a dataflow processing element of token storage type. The control flow unit tackles the dynamic nature of the stream structure including input/output whereas the dataflow unit does the computation part in an applicative style. A pipelined version of the stream machine is also discussed. The effectiveness of the machine is studied by running a few example programs in the simulated machine. The machine is expected to be useful in real time signal processing applications.     

High-order cubature rules for tetrahedra

In this paper, we construct new high-order numerical integration schemes for tetrahedra, with positive weights and integration points that are in the interior of the domain. The construction of cubature rules is a challenging problem, which requires the solution of strongly nonlinear algebraic (moment) equations with side conditions given by affine inequality constraints. We present a robust algorithm based on a sequence of three modified Newton procedures to solve the constrained minimization problem. In the literature, numerical integration rules for the tetrahedron are available up to order p=15. We obtain integration rules for the tetrahedron from p=2 to p=20, which are computed using multiprecision arithmetic. For p≤15, our approach provides integration rules that have the same or fewer number of integration points than existing rules; for p=16 to p=20, our rules are new. Numerical tests are presented that verify the polynomial-precision of the cubature rules. Convergence studies are performed for the integration of exponential, rational, weakly singular and trigonometric test functions over tetrahedra with flat and curved faces. In all tests, improvements in accuracy is realized as p is increased, though in some cases nonmonotonic convergence is observed.