Electrospun polymeric nanofibrous composites containing TiO2 short nanofibers

In this study, polymeric nanofibrous composites containing anatase TiO₂ short nanofibers (TiO₂-SNF) were successfully produced via electrospinning. The fabrication of the nanofibrous composite structure includes two steps. First, anatase TiO₂ nanofibers were obtained by calcination of electrospun PVP/TiO₂ nanofibers and then crushed into short nanofibers ranging from few microns in length. Second, these TiO₂-SNF were dispersed into polymer solutions and then electrospun into nanofibrous composites. We obtained nanofibers containing TiO₂-SNF from different polymer types including PMMA, PAN, PET and PC. The SEM and TEM imaging indicated that some of the TiO₂-SNF were fully covered by the polymeric matrix whereas some TiO₂-SNF were partially covered and/or stick on the surface of the fibers. The photocatalytic activity of nanofibrous composites containing TiO₂-SNF was evaluated by monitoring the photocatalytic decomposition of a model dye (rhodamine-6G) under UV irradiation.     

Simulation in decision making—a case study

An example of how simulation is used in analyzing a material handling system is presented. The Monte Carlo simulation of the Olinkraft plant not only provides the information on the effect of expansion on existing conveyer facilities, but also suggests the ways to improve the existing mode of operation. Validity of simulation is obtained by following the visual displays of the workings of different parts of the system within the simulation.     

Thermally Pretreated 46% Pt/Vulcan XC72: Characterisation by TGA/DSC/TEM and Cyclic Voltammetry

We report a study of thermal stability and impact of thermal pretreatment procedures for 46% Pt/Vulcan XC72 (Tanaka) fuel cell catalyst. Stability in air and in inert gas (nitrogen, argon, helium) has been investigated by thermal gravimetric analysis (TGA), TGA‐mass spectrometry (TGA‐MS) and differential scanning calorimetry (DSC). Two distinct low temperature mass loss processes (100–200 and 285–300 °C) were observed, each exhibiting unique pretreatment temperature dependencies. TGA‐MS data in helium show fragment ions that suggest the thermal degradation processes are associated with decomposition of materials such as processing aids. Transmission electron microscopy (TEM) reveals a modest increase in average Pt nanoparticle size upon thermal pretreatment. After a pretreatment protocol based on TEM and thermal characterisation (300 °C/15 min, N₂), the electrochemically active surface area did not increase. At the kinetically controlled potential region (E >0.8 V) there was a small drop in current density for treated 46% Pt/C in comparison with as‐received catalyst. The slowing in ORR kinetics is significant. Apparently, the removal of organic components, which would improve mass transport, is negated by increased nanoparticle size.     

Sustainable hydrogen production options from food wastes

In this study, two thermochemical processes, namely steam gasification and supercritical water gasification (SCWG), were comparatively studied to produce hydrogen from food wastes containing about 90% water. The SCWG experiments were performed at 400 and 450 °C in presence of catalyst (Trona, K₂CO₃ and seaweed ash). The maximum hydrogen yield was obtained at 450 °C in presence of K₂CO₃ catalyst. In second process, hydrothermal carbonization was used to convert food wastes into a high-quality solid fuel (hydrochar) that was further gasified in a dual-bed reactor in presence of steam. The steam gasification of hydrochar was carried out with and without catalysts (iron?ceria catalyst and dolomite). The maximum hydrogen yield obtained from steam gasification process was 28.08 mmol/g dry waste, about 7.7 times of that from SCWG. This study proposed a new concept for hydrogen production from wet biomass, combination of hydrothermal carbonization following steam gasification.     

A comparative study for synthesis methods of nano-structured (9Ni–2Mg–Y) alloy catalysts and effect of the produced alloy on hydrogen desorption properties of MgH2

9Ni–2Mg–Y alloy powders were prepared by arc melting, induction melting, mechanical alloying, solid state reaction and subsequent ball milling processes. The results showed that melting processes are not suitable for preparation of 9Ni–2Mg–Y alloy due to high losses of Mg and Y. Therefore, 9Ni–2Mg–Y alloy powder was prepared by three methods including: 1) mechanical alloying, 2) mechanical alloying + solid state reaction + ball milling, and 3) mixing + solid state reaction + ball milling. The prepared 9Ni–2Mg–Y alloy powders were compared for their catalytic effects on hydrogen desorption of MgH₂. It is found that 9Ni–2Mg–Y alloy powder prepared by mechanical alloying + solid state reaction + ball milling method has a smaller particle size (1–5 μm) and higher surface area (1.7 m² g⁻¹) than that of other methods. H₂ desorption tests revealed that addition of 9Ni–2Mg–Y alloy prepared by mechanical alloying + solid state reaction + ball milling to MgH₂ decreases the hydrogen desorption temperature of MgH₂ from 425 to 210 °C and improves the hydrogen desorption capacity from 0 to 3.5 wt.% at 350 °C during 8 min.     

Magnetic hydrophobic affinity nanobeads for lysozyme separation

N-Methacryloyl-l-phenylalanine (MAPA) containing poly(2-hydroxyethylmethacrylate) based magnetic [mag-poly(HEMA–MAPA)] nanobeads was prepared for lysozyme purification form chicken egg white. MAPA was synthesized by reacting methacryloyl chloride with l-phenylalanine methyl ester and provided hydrophobic functionality to the nanobeads. Size of mag-poly(HEMA–MAPA) nanobeads was 386 nm and obtained by surfactant free emulsion polymerization of HEMA and MAPA having a specific surface area of 580 m²/g. Mag-poly(HEMA–MAPA) nanobeads were characterized by FTIR, AFM, TEM, ESR, and elemental analysis. Lysozyme adsorption experiments were investigated under different conditions in batch system (i.e., medium pH, protein concentration, temperature, salt type). Lysozyme adsorption capacity of mag-poly(HEMA) and mag-poly(HEMA–MAPA) nanobeads from aqueous solutions was estimated as 24 and 517 mg/g, respectively. Lysozyme molecules were desorbed with 50% ethylene glycol solution with 98% recovery. It was observed that mag-poly(HEMA–MAPA) nanobeads can be used without significant decrease in lysozyme adsorption capacity after ten adsorption–desorption cycles. Mag-poly(HEMA–MAPA) nanobeads was used for the purification of lysozyme from chicken egg white. Purity of lysozyme was estimated by SDS-PAGE.     

Thermodynamic analysis of the interaction between 3-aminophenylboronic acid and monosaccharides for development of biosensor

The special interaction between 3-aminophenylboronic acid and monosaccharides, particularly glucose, fructose and galactose, has been investigated and used for the development of electrochemical and surface plasmon resonance (SPR) based saccharide sensors. The binding constants and thermodynamic parameters of interaction such as free energy of binding (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the first time using isothermal titration calorimetry revealed the enthalpic and entropic contributions to the free energies of binding. Effects of pH and buffer on the binding constants (k) between 3-aminophenylboronic acid and monosaccharides were also examined. The binding constant of fructose was found to be six times higher than glucose and four times higher than galactose at pH 11, leading the specific detection of fructose. SPR and potentiometric calibration for fructose were linear in the concentration range of 10–120 mM and 8–84 mM, respectively. Limit of detection of the SPR and potentiometric method were found to be as 8.9 mM and 1.4 mM, respectively.     

Computerized facility layout design

The paper describes a computerized facility layout designer, COMLAD II, for plant layout development. Besides developing an efficient layout, COMLAD II has useful features which allow fixing the departments, changing the shape of the departments and changing the length and width dimensions of the overall layout.