Modeling uranium biosorption by Cystoseira sp. and application studies

The aim of the present work was to determine the applicability of raw and modified brown macroalga Cystoseira sp. as a biosorbent material for the sorption of uranium ions from aqueous solutions. Equilibrium of uranium biosorption was analyzed under isotherm models and thermodynamic parameters of the process. Recovery of uranium from acidic mine wastewater was also applied. The mechanism of biosorption was discussed considering experimental data and theoretical models. The bioremoval efficiency of modified biomass was higher than raw Cystoseira sp. and the theoretical biosorption capacity of modified biosorbent was calculated to be 468.01 mg U/g.     

Double shield TBM performance analysis in difficult ground conditions: a case study in the Gerede water tunnel,Turkey

The performance analysis of double shield TBMs in difficult ground conditions in the Gerede tunnel is presented in this study. The strength of the encountered formations along the tunnel route varied from medium strength (sandstone, limestone) to high strength (basalt). The total length of tunnels is 31.6 km, which was excavated by three double shield TBMs having diameter of 5.57 m. Literature studies are first carried out in order to review the difficult ground conditions and their impacts on mechanized tunnelling. Later, the project, geology, and the characteristics of the TBMs are given in detail. Then the factors affecting the performance of the TBMs, machine utilization, and operational parameters (torque, thrust) are discussed in detail. In the light of these facts, the main objective of this study is to describe the possible improvement methods to reduce the effect of these difficulties on TBM performance.     

Polymers for medical and tissue engineering applications

Recent decades have seen great advancements in medical research into materials, both natural and synthetic, that facilitate the repair and regeneration of compromised tissues through the delivery and support of cells and/or biomolecules. Biocompatible polymeric materials have become the most heavily investigated materials used for such purposes. Naturally‐occurring and synthetic polymers, including their various composites and blends, have been successful in a range of medical applications, proving to be particularly suitable for tissue engineering (TE) approaches. The increasing advances in polymeric biomaterial research combined with the developments in manufacturing techniques have expanded capabilities in tissue engineering and other medical applications of these materials. This review will present an overview of the major classes of polymeric biomaterials, highlight their key properties, advantages, limitations and discuss their applications. © 2014 Society of Chemical Industry     

Statistical Tolerance Analysis for Assured Analog Test Coverage

Increasing numbers of analog components in today's systems necessitate system level test composition methods that utilize on-chip capabilities rather than solely relying on costly DFT approaches. We outline a tolerance analysis methodology for test signal propagation to be utilized in hierarchical test generation for analog circuits. A detailed justification of this proposed novel tolerance analysis methodology is undertaken by comparing our results with detailed SPICE Monte-Carlo simulation data on several combinations of analog modules. The results of our experiments confirm the high accuracy and efficiency of the proposed tolerance analysis methodology.     

Effect of Boron and Heat Treatment on Mechanical Properties of White Cast Iron for Mining Application

 Heat treatment methods were applied to white cast iron for improving the impact and wear resistance. Additionally, chemical composition optimization was made. Furthermore, the effect of boron addition on such applications was investigated. Samples were investigated by using optical and electron microscope methods. Hardness, wear and impact tests were conducted. The results showed that the secondary carbides in the standard alloy were iron-enriched, needle-like carbides M3C when the boron-added alloy contained Fe23(C,B)6 type, globular secondary carbides. It was concluded that heat treatment B provided higher wear and hardness properties, compared to the standard heat treatment. Optimum mechanical properties were obtained by lower destabilisation temperatures and increasing temperature reduced the wear resistance and hardness.     

Photochromic Polymers Based on the Photoinduced Opening and Thermal Closing of [1,3]Oxazine Rings

Two macromolecular constructs incorporating a single polymer backbone with multiple photochromic side chains are developed. Both systems are prepared from preformed photochromic [1,3]oxazines after the ring‐opening polymerization of their norbornene appendages. In solution, UV illumination of these polymers opens the [1,3]oxazine rings in their side chains in less than 6 ns and with a quantum yield of 0.09 in both instances. The photogenerated species incorporate a 4‐nitrophenolate chromophore, and hence, their formation is accompanied by the appearance of an intense band in the visible region of the absorption spectrum. The photoproducts revert spontaneously to the original state with first‐order kinetics in microseconds. Furthermore, both photochromic polymers tolerate hundreds of switching cycles with no sign of degradation, even in the presence of molecular oxygen. Thus, this design logic and choice of functional building blocks can translate into the realization of innovative photoresponsive materials with excellent photochromic performance.     

Thermodynamic analysis of the interaction between 3-aminophenylboronic acid and monosaccharides for development of biosensor

The special interaction between 3-aminophenylboronic acid and monosaccharides, particularly glucose, fructose and galactose, has been investigated and used for the development of electrochemical and surface plasmon resonance (SPR) based saccharide sensors. The binding constants and thermodynamic parameters of interaction such as free energy of binding (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the first time using isothermal titration calorimetry revealed the enthalpic and entropic contributions to the free energies of binding. Effects of pH and buffer on the binding constants (k) between 3-aminophenylboronic acid and monosaccharides were also examined. The binding constant of fructose was found to be six times higher than glucose and four times higher than galactose at pH 11, leading the specific detection of fructose. SPR and potentiometric calibration for fructose were linear in the concentration range of 10–120 mM and 8–84 mM, respectively. Limit of detection of the SPR and potentiometric method were found to be as 8.9 mM and 1.4 mM, respectively.     

Magnetic hydrophobic affinity nanobeads for lysozyme separation

N-Methacryloyl-l-phenylalanine (MAPA) containing poly(2-hydroxyethylmethacrylate) based magnetic [mag-poly(HEMA–MAPA)] nanobeads was prepared for lysozyme purification form chicken egg white. MAPA was synthesized by reacting methacryloyl chloride with l-phenylalanine methyl ester and provided hydrophobic functionality to the nanobeads. Size of mag-poly(HEMA–MAPA) nanobeads was 386 nm and obtained by surfactant free emulsion polymerization of HEMA and MAPA having a specific surface area of 580 m²/g. Mag-poly(HEMA–MAPA) nanobeads were characterized by FTIR, AFM, TEM, ESR, and elemental analysis. Lysozyme adsorption experiments were investigated under different conditions in batch system (i.e., medium pH, protein concentration, temperature, salt type). Lysozyme adsorption capacity of mag-poly(HEMA) and mag-poly(HEMA–MAPA) nanobeads from aqueous solutions was estimated as 24 and 517 mg/g, respectively. Lysozyme molecules were desorbed with 50% ethylene glycol solution with 98% recovery. It was observed that mag-poly(HEMA–MAPA) nanobeads can be used without significant decrease in lysozyme adsorption capacity after ten adsorption–desorption cycles. Mag-poly(HEMA–MAPA) nanobeads was used for the purification of lysozyme from chicken egg white. Purity of lysozyme was estimated by SDS-PAGE.