Boron nitride based polyaniline nanocomposite: Preparation,property, and application

In this study, we report first time the electrical properties and photocatalytic activity of HCl doped polyaniline (Pani) and Pani/boron nitride (Pani/BN) nanocomposite prepared by in situ polymerization of aniline using potassium persulfate (K₂S₂O₈) in the presence of hexagonal boron nitride (h‐BN). The prepared Pani and Pani/BN nanocomposite were characterized by Fourier transform infrared, X‐ray diffraction, Thermogravimetric analysis, Scanning electron microscope, and Transmission electron microscope. The stability of the Pani/BN nanocomposite in comparison of Pani in terms of the DC electrical conductivity retention was investigated under isothermal and cyclic aging conditions. The Pani/BN nanocomposite in terms of DC electrical conductivity was observed to be comparatively more thermally stable than Pani. The degradation of Methylene blue (MB) and Rhodamine B (RhB) under UV‐light irradiation were 50 and 56.4%, respectively, over Pani and 65.7 and 71.6%, respectively, over Pani/BN. The results indicated that the extent of degradation of MB and RhB was greater over nanocomposite material than Pani, which may result due to high electron–hole pairs charge separation under UV light. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43989.     

Synthesis and Properties of MoSi2–MoB–SiC Ceramics

MoB and SiC particulate reinforced MoSi₂ matrix composites were synthesized in situ from Mo, Si, and B₄C powder mixtures by self‐propagating high‐temperature synthesis (SHS). The SHS MoSi₂–MoB–SiC products were vacuum hot‐pressed (HPed) at 1400°C for 90 min to fabricate high‐density (> 97.5% relative density) bulk composites. Microstructure refinement and improvements in the Vickers hardness and fracture toughness of the HPed composites were observed with increasing B₄C content in the reaction mixture. The HPed composite of composition MoSi₂–0.4MoB–0.1SiC exhibited grain size of 1–5 μm, Vickers hardness of 12.5 GPa, bending strength of 537 MPa, and fracture toughness of 3.8 MPa.m^1/2. These excellent mechanical properties indicate that MoB and SiC particulate reinforced MoSi₂ composites could be promising candidates for structural applications.     

Abrasive water jet machining and mechanical behavior of banyan tree saw dust powder loaded polypropylene green composites

Banyan tree saw dust powder (BSD) filled Polypropylene (PP) green composites have been fabricated with varying amounts viz., 0%, 20%, and 40% of BSD particulate filler by using a co‐rotating twin screw extruder followed by injection molding. The mechanical properties such as surface hardness, tensile behavior, and impact strength of the fabricated PP/BSD green composites have been studied in order to standardize the composites. Abrasive water jet (AWJ) machining has been reported mainly for ceramics, concrete, and glass but not much literature is available on AWJ machining of polymer composites. This research is aimed at examining the AWJ machining of green polymer composites. The effect of BSD loading on the AWJ machining behavior of the PP/BSD green composites has been investigated. Furthermore, the effect of addition of 4% maleic anhydride grafted PP (coupling agent) and 4% talc (mineral filler) on the machining behavior of PP/BSD composites has also been evaluated. Surface roughness and optical micrographs of the AWJ cut composite specimens were examined to assess the effect of BSD content, AWJ traverse speed and pressure on the machining behavior of the composites. In order to probe the mechanism of AWJ machining behavior of PP/BSD composites, the kerf width and taper have been measured and results are correlated. POLYM. COMPOS., 37:1754–1764, 2016. © 2014 Society of Plastics Engineers     

Efficient conversion of light paraffinic naphtha to aromatics over metal-modified Mo/MFI catalysts

Journal of Porous Materials - The transformation of light naphtha to value-added aromatic compounds is gaining momentum in the petrochemical industry. In this work, a series of metal modified...     

The influence of process parameters on desulfurization of two Turkish lignites by selective oxidation

The chemical desulfurization of two high-sulfur Turkish lignites was investigated using a mixture of hydrogen peroxide in acetic acid. Sulfur removal was measured with respect to particle size, reaction time, reaction temperature and ultrasonic irradiation. In general, all inorganic sulfur and some organic sulfur were removed from these coals under mild conditions. Cayirhan lignite seemed more reactive towards peroxyacedic acid at slightly higher temperatures and longer reaction times, but under these conditions, solubility was high and yields of solid products declined. Reaction time and reaction temperature slightly changed the level of sulfur removal from Gediz lignite. The level of desulfurization was largely independent of the particle size for Gediz lignite, while sulfur removal from Cayirhan lignite seemed dependent of the particle size reaction temperature and reaction time.     

Performance of PAM/PEI gel system for water shut‐off in high temperature reservoirs: Laboratory study

A polymer gel is one of the common remediate methods to either reduce or totally block excessive water production in oilfields. Some systems demonstrated an excellent performance in treating the problem like polyacrylamide tert‐butyl acrylate (PAtBA)/polyethylenimine (PEI). In this study, polyacrylamide (PAM) was introduced as a cheap alternative to PAtBA that can tolerate high salinity reservoirs. The thermal stability of the PAM/PEI polymeric gel in saline water was examined at 150°C (302F). Samples prepared in sea water showed better stability compared with distilled and field water. Dynamic rheology and core‐flooding experiments were used to evaluate the PAM / PEI gel system at high temperatures. NaCl and NH₄Cl were evaluated as a possible retarders for delaying the gelation time in order to achieve a successful placement. NH₄Cl was found to be more effective retarder. Core‐flooding tests were conducted in sandstone and carbonate cores. The subject polymer gel was injected at rates typical of those in field applications. The injectivity of PAM/PEI was tested in Berea sandstone cores with initial permeability of ～45 mD. The post‐treatment of the system showed a permeability reduction of ～94% for a period of two weeks. The injectivity in low permeability carbonate cores required more retardation compared with the injectivity in sandstone cores. The gel reduced the permeability to brine in Indiana limestone core by 99.8% for more than 5 months. Rheology of cured gel samples indicated that the gel strength needs about one day of curing in the core for the strength to stabilize. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41869.     

Synthesis and application of phenylcarbamodithioate compound for steel protection

Phenyldithiocarbamate compound has been synthesized and studied as corrosion inhibitor for steel. Dithiocarbamate (DTC) compounds with linear alkyl groups are good inhibitors, but their stability is quite low in acidic solutions. It should be noted that long-term stability is important for practical applications, in order to avoid excess use of chemicals. So, we have synthesized phenyl substituted DTC which offers strong inhibition efficiency and extra stability. This new inhibitor is chemically adsorbed on steel through its DTC group, while the aromatic ring provides extra stability and long-term efficiency. For the assessment of corrosion kinetics, we have utilized potentiodynamic and ac impedance studies; also solution assay analysis was realized with atomic absorption spectroscopy. It was revealed that inhibitor exhibits remarkably high efficiency, even under elevated temperature conditions. At 55 °C temperature conditions, i_corr value decreased from 5050 to 154 μA cm^?2, with the addition of 500 ppm inhibitor. The long-term stability of inhibitor was also tested and 85.93% efficiency was obtained after three days of exposure period for 500 ppm concentration.