Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Microstructure and mechanical performance examination of 3D printed acrylonitrile butadiene styrene thermoplastic parts

Fused filament fabrication (FFF) is a process where thermoplastic materials are heated to its melting point and then extruded, layer by layer, to create a three dimensional printed part. Printing occurs in a layered manner, which leads to creation of voids (air gaps) in the 3D printed parts. These voids act as centers for crack initiation, propagation and therefore resulting bulk mechanical properties are lower. This paper focuses on microstructural characterization and analysis of fused filament fabricated tensile test coupons made from acrylonitrile butadiene styrene polymer, at various design conditions. Comparable tensile modulus with injection molded specimens was obtained for FFF design condition that is, slice height (0.1778 mm), raster width (0.4064 mm), raster to raster air gap (−0.0015 mm), contour to raster air gap (−0.0508 mm) and raster angle (0°). Scanning electron microscope studies provided an understanding as to why FFF processed specimens yielded lower failure strain and an insight into the presence of intralayer voids in specimens having lower tensile modulus. The study confirmed that though bulk mechanicals were affected by the combined effect of inter, intra and interfacial voids, intravoids had a predominant influence.     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

PDMS microfluidics: A mini review

Polydimethylsiloxane (PDMS) is hailed as one of the foundational materials for microfluidics. Though a silicone-based elastomer of many desirable properties, the emergence of microfluidic fabrication techniques, especially soft lithography, has elevated its status to an exceptional one. In this mini review, we look at the salient aspects that make PDMS so special in achieving such a coveted status in the microfluidics community. A methodical approach is followed to touch upon the application of PDMS in various aspects of microfluidics with the advantages, limitations, and some future directions. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48958.     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

Micro RNA-124a Regulates Lipolysis via Adipose Triglyceride Lipase and Comparative Gene Identification 58

Lipolysis is the biochemical pathway responsible for the catabolism of cellular triacylglycerol (TG). Lipolytic TG breakdown is a central metabolic process leading to the generation of free fatty acids (FA) and glycerol, thereby regulating lipid, as well as energy homeostasis. The precise tuning of lipolysis is imperative to prevent lipotoxicity, obesity, diabetes and other related metabolic disorders. Here, we present our finding that miR-124a attenuates RNA and protein expression of the major TG hydrolase, adipose triglyceride lipase (ATGL/PNPLA2) and its co-activator comparative gene identification 58 (CGI-58/ABHD5). Ectopic expression of miR-124a in adipocytes leads to reduced lipolysis and increased cellular TG accumulation. This phenotype, however, can be rescued by overexpression of truncated Atgl lacking its 3''UTR, which harbors the identified miR-124a target site. In addition, we observe a strong negative correlation between miR-124a and Atgl expression in various murine tissues. Moreover, miR-124a regulates the expression of Atgl and Cgi-58 in murine white adipose tissue during fasting as well as the expression of Atgl in murine liver, during fasting and re-feeding. Together, these results point to an instrumental role of miR-124a in the regulation of TG catabolism. Therefore, we suggest that miR-124a may be involved in the regulation of several cellular and organismal metabolic parameters, including lipid storage and plasma FA concentration.     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.     

Odds ratio-based group sequential analysis for joint binomial and inverse binomial sampling

We consider two treatment comparison in a clinical trial setup where the responses from one treatment are a priori known for a fixed number of individuals and patients are allocated in a groupsequential way for the other treatment using inverse sampling. We consider the odds ratio as the measure of treatment difference at the end of each group, where for the calculation of odds ratios we consider the full data on one treatment, which are a priori known, and the available data on the other treatment up to that point of time. We have calculated the optimal number of index subjects for inverse sampling and examine the effects of different type I and type II error spending functions on group sequential testing in this context. The methodology is illustrated by using a real data set.     

Saponin-loaded SBA-15: release properties and cytotoxicity to Panc-I cancer cells

In this study, first time a nanoformulation, saponin-loaded SBA-15 has been developed for an improved and continuous release. The SBA-15 nanopowder was synthesized by a hydrothermal process. Saponin was introduced into the mesoporous channels of SBA-15 and its concentration in SBA-15 was measured by UV–visible spectrophotometry. The pristine SBA-15 and saponin-loaded SBA-15 were characterized by small-angle XRD, FESEM, HRTEM, TGA, FTIR. N₂ adsorption–desorption isotherms were used to measure the specific surface area and pore channel structure parameters of pristine and loaded SBA-15. Saponin release was studied in phosphate buffered saline (pH 7.4), which revealed that the release rate could be effectively controlled. The controlled drug release is highly desired for cancer treatment. The cytotoxicity of pristine and loaded SBA-15 was analyzed on Panc-I cancer cells. Both the pristine SBA-15 and saponin-loaded SBA-15 nanoparticles showed specific toxicity on the cancer cells. The preliminary results showed that saponin-loaded SBA-15 could be an effective therapeutic agent for Panc-I cancer cells.