We investigate the role of interfacial slip on evaporation of a thin liquid film in a microfluidic channel. The effective
slip mechanism is attributed to the formation of a depleted layer adhering to the substrate–fluid interface, either in a continuum
or in a rarefied gas regime, as a consequence of intricate hydrophobic interactions in the narrow confinement. We appeal to
the fundamental principles of conservation in relating the evaporation mechanisms with fluid flow and heat transfer over interfacial
scales. We obtain semi-analytical solutions of the pertinent governing equations, with coupled heat and mass transfer boundary
conditions at the liquid–vapor interface. We observe that a general consequence of interfacial slip is to elongate the liquid
film, thereby leading to a film thickening effect. Thicker liquid films, in turn, result in lower heat transfer rates from
the wall to liquid film, and consequently lower mass transfer rates from the liquid film to the vapor phase. Nevertheless,
the total mass of evaporation (or equivalently, the net heat transfer) turns out to be higher in case of interfacial slip
due to the longer film length. We also develop significant physical insights on the implications of the relative thickness
of the depleted layer with reference to characteristic length scales of the microfluidic channel on the evaporation process,
under combined influences of the capillary pressure, disjoining pressure, and the driving temperature differential for the
interfacial transport. 相似文献
We propose a new link metric called normalized advance (NADV) for geographic routing in multihop wireless networks. NADV selects neighbors with the optimal trade-off between proximity and link cost. Coupled with the local next hop decision in geographic routing, NADV enables an adaptive and efficient cost-aware routing strategy. Depending on the objective or message priority, applications can use the NADV framework to minimize various types of link cost.We present efficient methods for link cost estimation and perform detailed experiments in simulated environments. Our results show that NADV outperforms current schemes in many aspects: for example, in high noise environments with frequent packet losses, the use of NADV leads to 81% higher delivery ratio. When compared to centralized routing under certain settings, geographic routing using NADV finds paths whose cost is close to the optimum. We also conducted experiments in Emulab testbed and the results demonstrate that our proposed approach performs well in practice. 相似文献
We have investigated and determined the potentiality of different water sources, both for drinking and domestic purposes, in diarrheal disease transmission in diarrhea endemic foci of urban slums in Kolkata, India in a one and half year prospective study. Out of 517 water samples, collected from different sources, stored water (washing) showed higher prevalence of fecal coliforms (58%) (p < 0.0001) in comparison with stored (drinking) samples (28%) and tap/tubewell water (8%) respectively. Among different sources, stored water (washing) samples had the highest non-permissible range of physico-chemical parameters. Fecal coliform levels in household water containers (washing) were comparatively high and almost 2/3 of these samples failed to reach the satisfactory level of residual chlorine. Interestingly, 7% stored water (washing) samples were found to be harboring Vibrio cholerae Improper usage of stored water and unsafe/poor sanitation practices such as hand washing etc. are highlighted as contributory factors for sustained diarrheal episodes. Vulnerability of stored water for domestic usage, a hitherto unexplored source, at domiciliary level in an urban slum where enteric infections are endemic, is reported for the first time. This attempt highlights the impact of quality of stored water at domiciliary level for fecal-oral contamination vis-à-vis disease transmission. 相似文献
A re-configurable, QoS-enhanced intelligent stochastic real-time optimal fair packet scheduler, QUEST, for IP routers is proposed and investigated. The objective is to maximize the system QoS subject to the constraint that the processor utilization is kept at 100%. All past work on router schedulers for multimedia traffic were of earlier generation, in that they focused on maximizing utilization whereas being QoS-aware but without explicitly maximizing the QoS. Keeping utilization fixed at nearly 100%, QoS is dynamically maximized, thus moving to the next generation. QUEST’s other unique advantages are three-fold. First, it solves the challenging problem of starvation for low priority processes; second, it solves the major bottleneck of Earliest Deadline First scheduler’s failure at heavy traffic loads. Finally, QUEST offers the benefit of arbitrarily pre-programming the process utilization ratio. Three classes of multimedia IP traffic, namely, VoIP, IPTV and HTTP have been considered. Two most important QoS metrics, namely, packet loss rate (PLR) and mean waiting time, are addressed. All claims are supported by discrete event and Monte Carlo simulations. The proposed scheduler outperforms benchmark schedulers and offers 37% improvement in packet loss rate and 23% improvement in mean waiting time over the best competing current scheduler Accuracy-aware EDF. The proposed scheduler was validated in a test-bed platform of a NetFPGA® router and results were observed with Paessler® PRTG network monitor.
Reinforcing bars, popularly termed “rebars,” are used to impart tensile strength to concrete structures. Concrete has high resistance to weathering and fire and high compressive strength but almost no tensile strength, hence rebars are used to provide the latter to concrete. Property consistency along the length of rebars is an important prerequisite. When the finished product is subjected to thermomechanical treatment (TMT), proper control of rolling and water box parameters and efficient pinch rolling are needed to achieve acceptable properties. Variation of yield strength (YS) along TMT bars from the front to back end has been observed within the same heat treatment. In the presented investigation, it was observed that pinch rolling ineffectiveness is the main reason for the poor mechanical properties at the back end. The pinch roller was unable to support the back end of the TMT bars properly to maintain the speed and tension of the bars, resulting in nonuniform cooling of the back end through the water box and subsequent mechanical property failure. Due to the substandard material of the pinch roller, it was unable to hold the back end of the bar properly. Based on analysis of the roller it was concluded that it failed due to improper microstructure, resulting in inadequate hardness and toughness for the stringent operating conditions. AISI H13 is a better material to use in such high-service-temperature conditions. Moreover, proper heat treatment is needed to achieve adequate hardness and microstructure properties. After proper heat treatment of pinch rollers, their service life was increased twofold, minimizing the YS variation along the rebars. 相似文献
Abstract Correlation properties of light scattered by a moving diffuser are determined by studying the spectral characteristics of the light that emerges from two pinholes placed after the diffuser. These properties are used to determine the correlation functions of the heights of diffuser surface and the speed of the diffuser. The phase of the light on the two pinholes after it has passed through the moving diffuser, is also determined. 相似文献
In the present investigation, boric acid was used in the ball formation of iron ore fines to improve the compressive strength (CS) of fired pellet. Boric acid was used in combination with carboxymethyl cellulose (CMC) and saw dust and the pellets were fired at different firing temperatures from 1000 to 1300 °C. Box–Behnken statistical design was followed for analyzing the CS at different levels of boric acid, CMC and firing temperature. Results were discussed using 2D surface plots. Response function predictions determined by the regression analysis showed coefficient of correlation (R2) for CS as 0.96. Highest CS of 450 kg/pellet was obtained with addition of 1% boric acid, 0.1% CMC and a temperature of 1300 °C within the range of parameters under investigation. 相似文献
ABSTRACT Solvent–antisolvent recrystallization produced ~8 µm average size RDX particles (UF-RDX) that were subsequently subjected to mechanical methods of ultrasonication and ball-milling to find further achievable reduction in particle size. Long duration ultrasonication for 20 h and 300 rpm ball milling for 4 h of UF-RDX decreased its average particle size to ~2 µm. RDX produced by all the three processes (solvent–antisolvent recrystallization, ultrasonication and ball-milling) was similar to coarser RDX in structure and thermal decomposition behavior. However, UF-RDX produced by solvent–antisolvent recrystallization was significantly less impact sensitive than that produced by ball-milling and ultrasonication. The issues of residual solvent and the metal contamination during RDX processing were addressed by process parameter optimization. Solvent–antisolvent recrystallization and mechanical methods even when used sequentially could not bring average particle size of RDX to nano-scale. 相似文献
Natural slopes consist of non-homogeneous soil profiles with distinct characteristics from slopes made of homogeneous soil. In this study, the limit equilibrium modified pseudo-dynamic method is used to analyze the stability of two-layered c-φ soil slopes in which the failure surface is assumed to be a logarithmic spiral. The zero-stress boundary condition at the ground surface under the seismic loading condition is satisfied. New formulations derived from an analytical method are proposed for the predicting the seismic response in two-layered soil. A detailed parametric study was performed in which various parameters (seismic accelerations, damping, cohesion, and angle of internal friction) were varied. The results of the present method were compared with those in the available literature. The present analytical analysis was also verified against the finite element analysis results. 相似文献