Determination of the polymer‐solvent contact angle by the capillary raising curve,applied to the field of supports for homogeneous catalysts

A comprehension of the phenomenon that controls the diffusion of an organic solvent to the pores of a polymeric matrix is fundamental for optimizing the operating conditions to distribute a homogeneous catalyst, which has to be supported on it. The traditional sessile drop method is impossible to use when a high polymer‐solvent affinity exists. In this case, a different determination technique, similar to the Wilhelmy static mode method and based on the direct observation of the capillary raising curve of the solvent on the polymeric surface, has been set together with an experimental apparatus specifically built to perform measurements at a desired temperature and atmosphere. Such a technique has been demonstrated to be easy and promising for differentiating the behavior of different polyolefins [polypropylene (PP), high density polyethylene (HDPE), heterophasic copolymers (COPO)] at equal solvent and different temperatures. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Alumina supported MoO3: an efficient and recyclable catalyst for selective oxidation of tertiary nitrogen compounds to N-oxides using anhydrous TBHP as oxidant under mild reaction conditions

Alumina-supported MoO₃ was found to be an efficient heterogeneous and recyclable catalyst for the oxidation of tertiary nitrogen compounds to N-oxides in excellent yields using anhydrous t-BuOOH as oxidant under mild reaction conditions.     

Ionic liquid promoted an improved synthesis of 3,4-dihydropyrimidinones using [bmim]BF4 immobilized Cu (II) acetylacetonate as recyclable catalytic system

An improved method for the synthesis of 3,4-dihydropyrimidinones by one pot cyclocondensation of aldehyde, β-dicarbonyl compound and urea with significant enhancement in reaction rates using room temperature ionic liquid [bmim] BF₄ immobilized Cu(acac)₂ as recyclable catalytic system is described.     

A simplification of a real‐time verification problem

We revisit the problem of real‐time verification with dense‐time dynamics using timeout and calendar‐based models and simplify this to a finite state verification problem. We introduce a specification formalism for these models and capture their behaviour in terms of semantics of timed transition systems. We discuss a technique, which reduces the problem of verification of qualitative temporal properties on infinite state space of a large fragment of these timeout and calender‐based transition systems into that on clock‐less finite state models through a two‐step process comprising of digitization and finitary reduction. This technique enables us to verify safety invariants for real‐time systems using finite state model checking avoiding the complexity of infinite state (bounded) model checking and scale up models without applying techniques from induction‐based proof methodology. In the same manner, we verify timeliness properties. Moreover, we can verify liveness for real‐time systems, which are not possible by using induction with infinite state model checkers. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of flexible polymeric shielding materials for soft gamma rays: Physicomechanical and attenuation characteristics of radiation crosslinked polydimethylsiloxane/Bi2O3 composites

Flexible lead‐free high energy radiation shielding material was developed through internal compounding. Polymer‐filler interaction, crosslinking density, specific gravity, physicomechanical characteristics, percentage attenuation, and thermal stability of the crosslinked composites were estimated. It was found that even at very high filler loading composites can be crosslinked; however, the crosslinking density was composition dependent and was highest in 10–50 wt% loading range at 100 kGy and 200 kGy. The Nielsen model was applied to understand the micromechanics of the system. Attenuation of gamma radiation from Am241 was not affected by the crosslinking density. Thermal stability of the composites was found to be significantly affected with bismuth oxide loading. POLYM. COMPOS., 37:756–762, 2016. © 2014 Society of Plastics Engineers     

High-Rate Uncorrelated Bit Extraction for Shared Secret Key Generation from Channel Measurements

Secret keys can be generated and shared between two wireless nodes by measuring and encoding radio channel characteristics without ever revealing the secret key to an eavesdropper at a third location. This paper addresses bit extraction, i.e., the extraction of secret key bits from noisy radio channel measurements at two nodes such that the two secret keys reliably agree. Problems include 1) nonsimultaneous directional measurements, 2) correlated bit streams, and 3) low bit rate of secret key generation. This paper introduces high-rate uncorrelated bit extraction (HRUBE), a framework for interpolating, transforming for decorrelation, and encoding channel measurements using a multibit adaptive quantization scheme which allows multiple bits per component. We present an analysis of the probability of bit disagreement in generated secret keys, and we use experimental data to demonstrate the HRUBE scheme and to quantify its experimental performance. As two examples, the implemented HRUBE system can achieve 22 bits per second at a bit disagreement rate of 2.2 percent, or 10 bits per second at a bit disagreement rate of 0.54 percent.     

Heteroepitaxial Patterned Growth of Vertically Aligned and Periodically Distributed ZnO Nanowires on GaN Using Laser Interference Ablation

A simple two‐step method of fabricating vertically aligned and periodically distributed ZnO nanowires on gallium nitride (GaN) substrates is described. The method combines laser interference ablation (LIA) and low temperature hydrothermal decomposition. The ZnO nanowires grow heteroepitaxially on unablated regions of GaN over areas spanning 1 cm², with a high degree of control over size, orientation, uniformity, and periodicity. High resolution transmission electron microscopy and scanning electron microscopy are utilized to study the structural characteristics of the LIA‐patterned GaN substrate in detail. These studies reveal the possible mechanism for the preferential, site‐selective growth of the ZnO nanowires. The method demonstrates high application potential for wafer‐scale integration into sensor arrays, piezoelectric devices, and optoelectronic devices.     

Acrylamide removal from heated foods

The possibility to remove acrylamide from foods by exploiting its chemical physical properties was studied. Commercial biscuits and potato chips were subjected to vacuum treatments at different combinations of pressure, temperature and time. Results showed that acrylamide removal was achieved only in samples previously hydrated at water activity values higher than 0.83, and that, a maximum of acrylamide removal was obtained between 5 and 15 min of vacuum treatment at 6.67 Pa and 60 °C. By applying these process conditions, it was possible to remove 43% and 18% acrylamide from the biscuits and the potato chips, respectively. It was hypothesised that the vacuum treatment could favour acrylamide formation by promoting the decarboxylation of the Schiff base, a key intermediate of acrylamide formation. Although further research is needed to find out for each food category the process conditions that can maximise acrylamide removal while minimising its formation as well as to evaluate the effects on the sensory properties, this technology would represent a promising and alternative strategy to mitigation interventions aimed at reducing acrylamide levels in foods.     

Influence of phase modifiers on morphology and properties of thermoplastic elastomers prepared from ethylene propylene diene rubber and isotactic polypropylene

A series of thermoplastic elastomers (TPEs) were prepared from a binary blend of ethylene propylene diene rubber (EPDM) and isotactic polypropylene (iPP) using different types of phase modifiers. The influence of sulphonated EPDM, maleated EPDM, styrene‐ethylene‐co‐butylene‐styrene block copolymer, maleated PP, and acrylated PP as phase modifiers showed improved physico‐mechanical properties (like maximum stress, elongation at break, moduli, and tension set). Scanning electron and atomic force microscopy studies revealed better morphologies obtained with these phase modified EPDM‐iPP blends. The dependence of the phase modifier type and concentration was optimized with respect to the improvement in physical properties and morphology of the blends. Physical properties, dynamic mechanical properties, and morphology of these blends were explained with the help of interaction parameter, melt viscosity, and crystallinity of the blends. Theoretical modeling showed that Kerner, Ishai‐Cohen, and Paul models predicted the right morphology–property correlation for the prepared TPEs. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.     

A novel approach to design optimal 2-D digital differentiator using vortex search optimization algorithm

Multimedia Tools and Applications - The designing of 2-D digital differentiator is multimodal and high dimensional problem which requires large number of differentiator coefficients to be...