RE／S值对控轧低碳Mn－Nb－RE钢硫化物成分和形貌的影响

用扫描电镜测定了含０．０４１％～０．０７６％ＲＥ的低碳Ｍｎ－Ｎｂ－ＲＥ钢中硫化物的成分、大小和形貌。ＲＥ／Ｓ值为２．８～３．０时，钢中的硫化物充分变质。     

精馏塔静态仿真：Ⅰ.静动态混合数学模型的应用

本文为了克服精馏塔静态仿真不易收敛和初值难以给定等难题，巧妙地利用隐含数值积分方法的特点，将稳态与动态数学模型耦合起来，用以求解高难度的非理想精馏塔静态仿真问题。所得静动态混俣模型大大提高了精馏塔静态仿真的鲁棒性，对于高度非理想精馏塔的仿真尤为有效。通过对某丙烯腈萃取精馏塔的静态仿真，充分证明了这种混合模型化方法的可行性。     

山洪灾害预警准确度与及时度研究

山洪灾害预警准确度与及时度是一对相互矛盾而又联系的重要指标。文章通过对这两项指标的研究和对引发灾害的降雨强度、降雨以及灾害发生的时间资料进行分析,从而获取预警系统建设的基本技术要点和参数,对把握山洪灾害预警系统的设计定位、启用时机和作用评估具有重要作用和意义。     

Application of the method of moments to acoustic scattering from fluid-filled cylinders using three different formulations

In this work, we present three different formulations, namely the pressure field integral equation formulation (PFIE), the velocity field integral equation formulation (VFIE), and the combined field integral equation formulation (CFIE) for solving acoustic scattering problems associated with two-dimensional fluid-filled bodies of arbitrary cross-section. In particular using the boundary conditions on the surface of the body, two equivalent problems, each valid for the outside and inside regions of the scatterer, are derived. By properly selecting the associated equations for these equivalent problems, the three different formulations are derived. The PFIE, VFIE, and CFIE are then solved by approximating the cylindrical cross-section by linear segments and employing the method of moments. Further, it is shown that the moment matrices generated by the PFIE and VFIE are ill-conditioned at resonant frequencies of the cylinder, whereas the CFIE generates a well-conditioned matrix at all frequencies. The solution techniques presented in this work are simple, efficient and applicable to truly arbitrary geometries. Numerical results are presented for certain canonical shapes and compared with other available data.     

Modeling, analysis, and implementation of parallel multi-inverter systems with instantaneous average-current-sharing scheme

Parallel multi-inverter systems can be designed to have the advantages of expandable output power, improved reliability, and easy N+X redundancy operation. However, a current-sharing control scheme has to be employed to enable the inverters to share the load current equally. A multi-inverter system with instantaneous average-current-sharing scheme is presented in this paper. By introducing a disturbance source to represent all the sources that may cause current unbalances, a model of the system can be built. Some key issues are discussed based on the model, including stability of the current-sharing controller, impedance characteristics and voltage regulation. Three experimental 110 VAC/1.1 kVA inverters are built and paralleled to verify the theoretical predictions.     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

Prediction of compressive strength and optimization of mixture proportioning in ternary cementitious systems

This paper discussed the application of the method of the simplex-lattice design for predicting the properties of cement-based composites. On the basis of the compressive strength, its use was demonstrated on ternary paste systems composed of cement, silica fume and fly ash with constant water to binder ratio and a mass fraction of mineral admixtures not exceeding 30%. The regression model between compressive strength of paste and binder proportion was built up. The F-test method was utilized for validation of the regression model. The nonlinear programming system with upper and lower bound was solved. This allowed assessment of optimum mixture proportions and corresponding maximum compressive strength. It was shown that: (1) the 3rd-order regression model constructed by using the simplex-lattice design method could accurately predict the compressive strength in ternary paste system made of cement, silica fume and fly ash (the total mass fraction of all mineral admixtures was up to 30%); (2) to solve the nonlinear programming with the constraints of upper and lower bound played an important role in getting the optimum compressive strength and its corresponding mixture proportion at different ages; (3) the combination of the simplex-lattice design method and the optimization theory could be valuable tool for optimization of cement-based composites' properties.     

Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.     

Synthesis and magnetic properties of novel fully conjugated polymeric complexes containing 1,10‐phenanthroline

A novel fully conjugated polymer containing 1,10‐phenanthroline (DAPcDOD) was first synthesized by the polycondensation of 2,7‐dimethyl‐2,4,6‐octatriene‐1,8‐dial with 5,6‐diamine‐1,10‐phenanthroline. Three polymeric complexes were first prepared by the reaction of DAPcDOD with NiSO₄, CoCl₂, and FeSO₄, respectively. The structures of the polymer and the complexes were characterized by IR, ¹H‐NMR, and elemental analysis. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 5 K and as a function of temperature (5–300 K) at a magnetic field strength of 30 kOe. The results show that DAPcDOD–Ni²⁺ and DAPcDOD–Co²⁺ were soft ferromagnets, whereas DAPcDOD–Fe²⁺ exhibited the features of an antiferromagnet. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008