Synthesis of Co/SiO2 hybrid nanocatalyst via twisted Co3Si2O5(OH)4 nanosheets for high-temperature Fischer-Tropsch reaction

A cobalt-silica hybrid nanocatalyst bearing small cobalt particles of diameter ～5 nm was prepared through a hydrothermal reaction and hydrogen reduction.The resulting material showed very high CO conversion (＞82％) and high hydrocarbon productivity (～1.0 gHc·g-1cat,·h-11) with high activity (～8.5 x 10-5 molco·g-1Co·S-1) in the Fischer-Tropsch synthesis reaction.     

Improvement in mechanical properties of recycled GF prepreg with CNT reinforced composites using a spray coating method

Dispersion and shape of nanoparticles, as well as interfacial conditions, add significantly to difficulties in composite manufacture. In the work reported here, an innovative method of recycling composites using out-of-date prepreg was investigated in which the carbon nanotube (CNT) on the prepreg was optimally coated. Nanocomposites utilizing the out-of-date prepreg were coated with CNT and fabricated by a sheet molding method. CNT nanofillers were observed to be uniformly dispersed on epoxy prepreg by spray coating. The mechanical and interfacial properties of these CNT coated nanocomposites were improved over those of more conventionally manufactured carbon fiber/epoxy composites. The CNT nanofillers were embedded at the epoxy and fiber interface, as a result of etching of the epoxy prepreg surface by a CNT dispersion solution which enhanced interfacial reactivity.     

Mechanical and electrical properties of electrospun CNT/PVDF nanofiber for micro-actuator applications

Electrospun polyvinylidene fluoride (PVDF)-containing carbon nanotubes (CNT) were prepared for use in fabricating actuator materials. Actuating displacement was measured in an electrochemical environment. The electrospun nanofibers were arranged using a drum-type collector, and morphology was investigated using a field emission-scanning electron microscope. The uniformity of dispersion of CNT in the PVDF nanofibers was monitored by electron probe X-ray micro-analysis. Tensile strength and electrical resistivity results were used as an indication of the state of alignment. The electrospun CNT/PVDF nanofiber sheets exhibited better mechanical and electrical properties in the arranged direction. The efficiency and electrical capacities of electrospun CNT/PVDF nanofiber sheet were compared with those of cast PVDF sheets for use in actuator applications in electrochemical environments. The electrospun CNT/PVDF nanofiber sheets exhibited much better actuator performance than PVDF sheets, which are attributed to their superior electrical properties.

Highlights

(1) The interfacial durability of CNT/PVDF nanofibers was enhanced to increase contact area by reinforcing CNT.

(2) The efficiency of CNT/PVDF actuators was improved due to interfacial properties.

(3) Thin thickness drum-type collector was made to enhance nanofiber alignment.

(4) The arranged CNT/PVDF nanofibers exhibited better mechanical and actuating displacements.     

Gas formation and biological effects of biodegradable magnesium in a preclinical and clinical observation

Magnesium alloys are biodegradable metals receiving increasing attention, but the clinical applications of these materials are delayed by concerns over the rapid corrosion rate and gas formation. Unlike corrosion, which weakens mechanical properties, the gas formation issue has received little attention. Therefore, we evaluated the gas formation and biological effects for Mg implants through preclinical (immersed in Earle’s balanced salt solution and in vivo) and clinical studies. The immersion test examined the gas volume and composition. The in vivo study also examined gas volume and histological analysis. The clinical study examined the gas volume and safety after Mg screw metatarsal fixation. Gas was mainly composed of H₂, CO and CO₂. Maximum volumes of gas formed after 5 days for in vivo and 7 days in clinical study. Within the clinical examination, two superficial wound complications healed with local wound care. Osteolytic lesions in the surrounding metaphysis of the Mg screw insertion developed in all cases and union occurred at 3 months. Mg implants released gas with variable volumes and composition (H₂, CO, and CO₂), with no long-term toxic effects on the surrounding tissue. The implants enabled bone healing, although complications of wound breakdown and osteolytic lesions developed.     

An Electroactive and Transparent Haptic Interface Utilizing Soft Elastomer Actuators with Silver Nanowire Electrodes

An electroactive and transparent haptic interface having a rectangular void pattern creates tunable surface textures by controlling the wavelength and amplitude of independent void‐lines. To make an active tactile surface, the transparent haptic interface employs a silver nanowire (AgNW) electrode to be compliant with the deformed elastomer surface. Here, the dielectric elastomer is newly blended with polydimethylsiloxane and Ecoflex prepolymer to simultaneously control the mechanical stiffness and transparency. The relative resistance of the AgNW electrode on a single void line is nearly unchanged under bending test, confirming the high stretchability and conductivity of the nanowire‐networked electrode. The optical transparencies are 92–85%, depending on the ratio of the Ecoflex solution. Transparency values decreas by 7 and 16% after coating with AgNWs at densities of 30 and 140 mg m^?2, respectively. Using EP31, the void line is deformed by 90 µm under a field intensity of 13.0 V µm^?1. The haptic surface is successfully controlled by applying voltage, which produces four different surface textures, from relatively smooth to rough feeling, depending on the distance between deformed void lines. This haptic interface can be applied to diverse display systems as an external add‐on screen and will help to realize programmable surface textures in the future.     

Observer‐based resilient finite‐time control of blood gases model during extra‐corporeal circulation

This study aims at designing an observer‐based resilient controller to regulate the amount of oxygen and carbon dioxide in the blood of patients during the extra‐corporeal blood circulation process. More precisely, in this study, a suitable observer‐based resilient controller is constructed to regulate the levels of patient blood gases in a finite interval of time. The finite‐time boundedness with the prescribed H∞ performance index of the considered blood gases control system against modelling uncertainty and external disturbances is ensured by using Lyapunov stability analysis. Moreover, a set of sufficient conditions for obtaining the controller gain is developed in the form of linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed robust finite‐time control scheme is verified through simulation results. The result reveals that the blood gases are maintained in their physiological ranges during a stable extra‐corporeal circulation process via the proposed observer‐based resilient controller.Inspec keywords: blood, haemodynamics, oxygen, carbon compounds, controllers, medical control systems, biomedical equipment, Lyapunov methods, linear matrix inequalitiesOther keywords: observer‐based resilient finite‐time control, observer‐based resilient controller, oxygen amount, carbon dioxide amount, extracorporeal blood circulation process, patient blood gas levels, finite time interval, finite‐time boundedness, H_∞ performance index, blood gases control system, Lyapunov stability analysis, controller gain, linear matrix inequalities, physiological ranges, LMIs, CO₂ , O₂      

Surface modification of polyetherurethaneureas and their antithrombogenicity

Polyetherurethaneurea (PU) films were treated by oxygen plasma discharge followed by acrylic acid (AA) grafting. The carboxyl groups of the AA-grafted PU (PU-AA) surface were coupled with bovine serum albumin and heparin via water soluble carbodiimide. Surface characterization of the modified PUs was carried out by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and electron spectroscopy for chemical analysis (ESCA). The amount of immobilized albumin and heparin on the PU surface was 1.8 and 1.5 g/cm², respectively, as determined by the dye interaction method. Interactions between the surface-modified PUs and blood components such as plasma proteins and platelets were investigated to evaluate the blood compatibility of the samples. Plasma recalcification time (PRT) and activated partial thromboplastin time (APTT) of the albumin-immobilized PU (PU-Al) were almost the same as those of PU, while platelets were less adhered on the PU-Al than on PU. On the other hand, PRT and APTT of the PU-He were significantly longer than those of the PU, PU-AA, and PU-Al. Moreover, adhesion of platelets was effectively suppressed on the PU-He, leading to good in vitro blood compatibility.     

Microstructure and fracture of SiC-particulate-reinforced cast A356 aluminum alloy composites

A microstructural analysis of local microfracture of cast A356 Al-SiC _p composites fabricated by permanent mold re-casting and squeeze-casting methods was made. Notch fracture toughness tests were conducted on these composites to identify critical fracture parameters using a stress-modified critical-strain criterion. The composite microstructure shows continuous networks of densely populated SiC and eutectic Si particles along the intercellular regions. Squeeze casting produces a more homogeneous structure and larger spacing of brittle particles and increases the tensile ductility and fracture toughness, while strength levels are almost identical to the re-casting case. The calculated values of the microstructurally characteristic distancel* for the re-cast and squeeze-cast composites are about 40 μm, which is comparable to the average sizes of the intercellular network. However, the reference critical strain for squeeze casting is larger than that for re-casting, showing a trend to higher ductility and fracture toughness.