Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium Batteries

Li[Ni_0.65Co_0.13Mn_0.22]O₂ cathode with two‐sloped full concentration gradient (TSFCG), maximizing the Ni content in the inner part of the particle and the Mn content near the particle surface, is synthesized via a specially designed batch‐type reactor. The cathode delivers a discharge capacity of 200 mAh g^?1 (4.3 V cutoff) with excellent capacity retention of 88% after 1500 cycles in a full‐cell configuration. Overall electrochemical performance of the TSFCG cathode is benchmarked against conventional cathode (CC) with same composition and commercially available Li[Ni_0.8Co_0.15Al_0.05]O₂ (NCA). The TSFCG cathode exhibits the best cycling stability, rate capability, and thermal stability of the three electrodes. Transmission electron microscopy analysis of the cycled TSFCG, CC, and NCA cathodes shows that the TSFCG electrode maintains both its mechanical and structural integrity whereas the NCA electrode nearly pulverizes due to the strain during cycling.     

Interconnection Technology Based on InSn Solder for Flexible Display Applications

A novel interconnection technology based on a 52InSn solder was developed for flexible display applications. The display industry is currently trying to develop a flexible display, and one of the crucial technologies for the implementation of a flexible display is to reduce the bonding process temperature to less than 150°C. InSn solder interconnection technology is proposed herein to reduce the electrical contact resistance and concurrently achieve a process temperature of less than 150°C. A solder bump maker (SBM) and fluxing underfill were developed for these purposes. SBM is a novel bumping material, and it is a mixture of a resin system and InSn solder powder. A maskless screen printing process was also developed using an SBM to reduce the cost of the bumping process. Fluxing underfill plays the role of a flux and an underfill concurrently to simplify the bonding process compared to a conventional flip‐chip bonding using a capillary underfill material. Using an SBM and fluxing underfill, a 20 μm pitch InSn solder SoP array on a glass substrate was successfully formed using a maskless screen printing process, and two glass substrates were bonded at 130°C.     

Effects of Nd2O3 and TiO2 Addition on the Microstructures and Microwave Dielectric Properties of BaO-Nd2O3-TiO2 System

The effects of Nd₂O₃ and TiO₂ addition on the microstructures and microwave dielectic properties of BaO-Nd₂O₃-TiO₂ system were investigated. BaNd₂Ti₄O₁₂ or BaNd₂Ti₅O₁₄ phases were observed for compositions based on BaO/Nd₂O₃ = 1 ratio. The compositions deviated from BaO/Nd₂O₃ = 1 ratio were composed of major phases of BaNd₂Ti₄O₁₂ or BaNd₂Ti₅O₁₄, and the compound of Nd₂O₃ and TiO₂ (Nd₂Ti₂O₇) or that of BaO and TiO₂ (BaTi₄O₉). The microstructure of ceramic with BaO·Nd₂O₃ ·4TiO₂ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing Nd₂O₃, the optimum sintering temperature with maximum density increased, and the dielectric constant( · _r) and quality factor(Q) decreased due to the formation of secondary phases. With increasing TiO_2/ the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ·_f shifted toward positive direction. The dielectric ceramics with BaO/Nd₂O₃ = 1 showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.     

Survey of traffic control schemes and protocols in ATM networks

The authors survey a number of important research topics in ATM (asynchronous transfer mode) networks. The topics covered include mathematical modeling of various types of traffic sources, congestion-control and error-control schemes for ATM networks, and priority schemes to support multiple classes of traffic. Standard activity for ATM networks and future research problems in ATM are also presented. It is shown that the cell-arrival process for data sources can be modeled by a simple Poisson process. However, voice sources or video sources require more complex processes because of the correlation among cell arrivals. Due to the effects of high-speed channels, preventive control is more effective in ATM networks than reactive control. Due to the use of optical fibers in ATM networks, the channel error rate is very small. The effects of propagation delay and processing time become significant in such high-speed networks. These fundamental changes trigger the necessity to reexamine the error-control schemes used in existing networks. Due to the diversity of service and performance requirements, the notion of multiple traffic classes is required, and separate control mechanisms should be used according to the traffic classes. The priority scheme is shown to be an effective method to support multiple classes of traffic     

Threshold‐Based Camera Motion Characterization of MPEG Video

We propose an efficient scheme for camera motion characterization in MPEG‐compressed video. The proposed scheme detects six types of basic camera motions through threshold‐based qualitative interpretation, in which fixed thresholds are applied to motion model parameters estimated from MPEG motion vectors (MVs). The efficiency and robustness of the scheme are validated by the experiment with real compressed video sequences.     

A reconfigurable microstrip antenna for switchable polarization

A novel reconfigurable microstrip antenna with switchable polarization sense is proposed. The proposed antenna has a simple structure, consisting of a corner-truncated square radiating patch, four small triangular conductors, and a microstrip line feed. Using independently biased PIN diodes on the patch, it can produce linear polarization, or left- or right-hand circular polarization according to bias voltages. From the measured results, low cross-polarization levels when operated in the linear state and good axial ratios in the circular state are observed.     

A high-power wideband traveling-wave tube with stepwise changes in the diameter of the drift channel

Results of the design of a high-power wideband (in the band 8–18 GHz) traveling-wave tube (TWT) with stepwise changes in the diameter of the drift channel are presented. The TWT is stable against self-excitation by a backward wave at high values of the accelerating voltage. It is shown that the output section of the device can be increased by a factor of 1.5 and the operating current can be raised by a factor of 1.3. These increases are attained owing to the 1.27-GHz diversity of the π-type frequencies of sections with different values of the channel diameter and owing to growth of the starting current corresponding to self-excitation by the backward wave. Application of the TWT with the interaction space that has steps of the channel diameter improved the electron efficiency by a factor of 1.2 and increased the output power by a factor of 1.6.     

Selective Photothermal Tumor Therapy Using Nanodiamond‐Based Nanoclusters with Folic Acid

This paper describes the fabrication and evaluation of folic acid (FA)‐conjugated nanodiamond (ND) nanoclusters for selective photothermal tumor therapy. ND nanoclusters with surface carboxyl groups are aminated using ethylenediamine and conjugated with FA via carbodiimide chemistry. The temperature of an aqueous ND dispersion (10 μg mL^?1) is increased to 54 °C upon laser exposure for 5 min. FA‐ND nanoclusters are preferentially taken up by KB cells (folate receptor positive) compared to WI‐38 (folate receptor negative) cells, suggesting specificity for tumor cells that overexpress folate receptors. Cell viability tests reveal that FA‐ND nanoclusters effectively and selectively ablate KB cells upon near‐infrared (NIR) laser exposure. In addition, fluorescence microscopy images confirm that only KB cells treated with FA‐ND nanoclusters are ablated in a spot (200 μm in diameter) by NIR laser exposure. In an animal model, a large amount of FA‐ND nanoclusters is accumulated into tumor tissue, resulting in dramatically reduced tumor volume post‐NIR laser exposure as compared to ND nanoclusters.     

Fabrication and photoelectric properties of the ZnO-Cu(In,Ga)Se<Subscript>2</Subscript> heterojunctions

Thin-film n-ZnO:Al/p-Cu(In,Ga)Se₂ heterojunctions are fabricated by magnetron sputtering of an ZnO target, leading to a deposition of Cu(In,Ga)Se₂ films on the surface. The photoelectric properties of the fabricated heterojunctions are studied under exposure to natural and linearly polarized light. It is concluded that the resulting cadmium-free environmentally safe heterostructures can be used as high-efficiency broad-band photoconverters of natural and linearly polarized light.     

A high-yield fabrication process for silicon neural probes

There is a great need for silicon microelectrodes that can simultaneously monitor the activity of many neurons in the brain. However, one of the existing processes for fabricating silicon microelectrodes-reactive-ion etching in combination with anisotropic KOH etching-breaks down at the wet-etching step for device release. Here we describe a modified wet-etching sidewall-protection technique for the high-yield fabrication of well-defined silicon probe structures, using a Teflon shield and low-pressure chemical vapor deposition (LPCVD) silicon nitride. In the proposed method, a micro-tab holds each individual probe to the central scaffold, allowing uniform anisotropic KOH etching. Using this approach, we obtained a well-defined probe structure without device loss during the wet-etching process. This simple method yielded more accurate fabrication and an improved mechanical profile.