Ultra-wideband (from DC to 110 GHz) CPW to CPS transition

A new ultra-wideband, low-loss and small-size coplanar waveguide (CPW) to coplanar strip (CPS) transition which can be used from DC to 110 GHz is presented. The proposed transition connects CPW with CPS by the reformed air-bridge. Two ground planes of CPW are tied at their ends by a line and the centre of the line is connected to the ground strip of CPS by another line. Owing to the symmetry of the proposed structure, the currents of two ground planes of CPW are combined with the same phase and transferred to the ground strip of CPS. With height of 3 μm, the signal line of CPW passes over two connecting lines and is connected to the signal strip of CPS. For the back-to-back transition structure, insertion loss <1 dB and return loss >15 dB are obtained from 0.5 to 110 GHz     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

开发PROFIBUS-DP智能从站

简单介绍了PROFIBUS－DP现场总线，同时讨论了利用89C52单片机和PROFIBUS－DP从站芯片SPC3开发PROFIBUS－DP智能从站的软硬件设计方法。     

Background memory area estimation for multidimensional signalprocessing systems

Memory cost is responsible for a large amount of the chip and/or board area of customized video and image processing system realizations. In this paper, we present a novel technique-founded on data-flow analysis which allows one to address the problem of background memory size evaluation for a given nonprocedural algorithm specification, operating on multidimensional signals with affine indexes. Most of the target applications are characterized by a huge number of signals, so a new polyhedral data-flow model operating on groups of scalar signals is proposed. These groups are obtained by a novel analytical partitioning technique, allowing to select a desired granularity, depending on the application complexity. The method incorporates a way to tradeoff memory size with computational and controller complexity     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

刍议小型水电站项目收购风险管理

相对于其他项目的收购风险评估，小型水电站（电站总装机容量5万kW以下）收购有其特殊性。在总结和归纳小型水电站特点的基础上，结合一般项目收购风险评估方法，分析项目收购各个阶段存在的风险和对策。为有收购水电项目意向的企业和个人提供决策依据。图1幅。     

Degradation Behaviors of Metal-Induced Laterally Crystallized n-Type Polycrystalline Silicon Thin-Film Transistors Under DC Bias Stresses

Device degradation behaviors of typical-sized n-type metal-induced laterally crystallized polycrystalline silicon thin-film transistors were investigated in detail under two kinds of dc bias stresses: hot-carrier (HC) stress and self-heating (SH) stress. Under HC stress, device degradation is the consequence of HC induced defect generation locally at the drain side. Under a unified model that postulates, the establishment of a potential barrier at the drain side due to carrier transport near trap states, device degradation behavior such as asymmetric on current recovery and threshold voltage degradation can be understood. Under SH stress, a general degradation in subthreshold characteristic was observed. Device degradation is the consequence of deep state generation along the entire channel. Device degradation behaviors were compared in low V_d-stress and in high V_d-stress condition. Defect generation distribution along the channel appears to be different in two cases. In both cases of SH degradation, asymmetric on current recovery was observed. This observation, when in low V_d-stress condition, is tentatively explained by dehydrogenation (hydrogenation) effect at the drain (source) side during stress     

Application of model predictive control strategy based on fuzzy identification to an SP-100 space reactor

In this work, a model predictive control method combined with fuzzy identification, is applied to the design of the thermoelectric (TE) power control in the SP-100 space reactor. The future TE power is predicted by using the fuzzy model identified by a subtractive clustering method of a fast and robust algorithm. The objectives of the proposed fuzzy model predictive controller are to minimize both the difference between the predicted TE power and the desired power, and the variation of control drum angle that adjusts the control reactivity. Also, the objectives are subject to maximum and minimum control drum angle and maximum drum angle variation speed. The genetic algorithm that is effective in accomplishing multiple objectives is used to optimize the fuzzy model predictive controller. A lumped parameter simulation model of the SP-100 nuclear space reactor is used to verify the proposed controller. The results of numerical simulations to check the performance of the proposed controller show that the TE generator power level controlled by the proposed controller could track the target power level effectively, satisfying all control constraints.     

The design of robots and intelligent manipulators using modern composite materials

The operating speed and endpoint positional accuracy of existing industrial manipulators are limited by the inertial and stiffness characteristics of the articulating members of the robot's mechanical linkage. This limitation may be overcome by developing members having high structural stiffness and strength with low mass, and this has been recognized for some time. These characteristics can be obtained by fabricating the moving members of manipulators in fiber reinforced composite materials. In order to establish a basis for the dynamic analysis of robots fabricated in viscoelastic composites, a variational theorem is developed herein. A preliminary comparative study is then undertaken for manipulators manufactured in a graphite-epoxy composite material and also steel in order to demonstrate some of the advantages to be accrued from this proposed new design philosophy.