All‐Solution‐Processed Indium‐Free Transparent Composite Electrodes based on Ag Nanowire and Metal Oxide for Thin‐Film Solar Cells

Fully solution‐processed Al‐doped ZnO/silver nanowire (AgNW)/Al‐doped ZnO/ZnO multi‐stacked composite electrodes are introduced as a transparent, conductive window layer for thin‐film solar cells. Unlike conventional sol–gel synthetic pathways, a newly developed combustion reaction‐based sol–gel chemical approach allows dense and uniform composite electrodes at temperatures as low as 200 °C. The resulting composite layer exhibits high transmittance (93.4% at 550 nm) and low sheet resistance (11.3 Ω sq^‐1), which are far superior to those of other solution‐processed transparent electrodes and are comparable to their sputtered counterparts. Conductive atomic force microscopy reveals that the multi‐stacked metal‐oxide layers embedded with the AgNWs enhance the photocarrier collection efficiency by broadening the lateral conduction range. This as‐developed composite electrode is successfully applied in Cu(In_1‐x,Ga_x)S₂ (CIGS) thin‐film solar cells and exhibits a power conversion efficiency of 11.03%. The fully solution‐processed indium‐free composite films demonstrate not only good performance as transparent electrodes but also the potential for applications in various optoelectronic and photovoltaic devices as a cost‐effective and sustainable alternative electrode.     

Improving Radio Frequency Transmission Properties of Graphene via Carrier Concentration Control toward High Frequency Transmission Line Applications

Graphene has been gradually studied as a high‐frequency transmission line material owing to high carrier mobility with frequency independence up to a few THz. However, the graphene‐based transmission lines have poor conductivity due to their low carrier concentration. Here, it is observed that the radio frequency (RF) transmission performance could be severely hampered by the defect‐induced scattering, even though the carrier concentration is increased. As a possible solution, the deposition of the amorphous carbon on the graphene is studied in the high‐frequency region up to 110 GHz. The DC resistance is reduced by as much as 60%, and the RF transmission property is also enhanced by 3 dB. Also, the amorphous carbon covered graphene shows stable performance under a harsh environment. These results prove that the carrier concentration control is an effective and a facile method to improve the transmission performance of graphene. It opens up the possibilities of using graphene as interconnects in the ultrahigh‐frequency region.     

Sub‐5 nm Dendrimer Directed Self‐Assembly with Large‐Area Uniform Alignment by Graphoepitaxy

Directed self‐assembly (DSA) using soft materials is an important method for producing periodic nanostructures because it is a simple, cost‐effective process for fabricating high‐resolution patterns. Most of the previously reported DSA methods exploit the self‐assembly of block copolymers, which generates a wide range of nanostructures. In this study, cylinders obtained from supramolecular dendrimer films with a high resolution (<5 nm) exhibit planar ordering over a macroscopic area via guiding topographical templates with a high aspect ratio (>10) and high spatial resolution (≈20 nm) of guiding line patterns. Theoretical and experimental studies reveal that this property is related to geometrical anchoring on the meniscus region and physical surface anchoring on the sidewall. Furthermore, this DSA of dendrimer cylinders is demonstrated by the non‐regular geometry of the patterned template. The macroscopic planar alignment of the dendrimer nanostructure reveals an extremely small feature size (≈4.7 nm) on the wafer scale (>16 cm²). This study is expected to open avenues for the production of a large family of supramolecular dendrimers with different phases and feature dimensions oriented by the DSA approach.     

A device design methodology for sub-100-nm SOC applications using bulk and SOI MOSFETs

CMOS for the mixed-mode applications has gained much interest recently. While the International Technology Roadmap for Semiconductors provides two different scaling guidelines for the analog and digital circuit operation using the bulk MOSFET, there are no well-defined scaling guidelines for improving the analog performance of silicon-on-insulator (SOI) MOSFETs. This paper presents a systematic and quantitative comparison between the analog characteristics of the bulk and SOI technology. The intrinsic gain, f/sub T/ and g/sub m//I/sub ds/ ratio are considered as a metric for this comparison. It is shown that, even for the operating frequencies in the range of gigahertz (where the ac kink effect is suppressed), analog performance of SOI devices is inferior to that of the bulk devices due to the capacitive drain-to-body coupling. Based on our study, we show that hat the gate-workfunction engineering (close to mid-gap workfunction) is essential in fully depleted SOI (FDSOI) devices for improving analog performance. The analog performance of partially depleted SOI (PDSOI) devices can be improved by using body-tied structures. An increased gate control in double-gate MOSFETs can provide very high output resistance for short-channel devices.     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

Improved stochastic gradient adaptive filter with gradient adaptivestep size

The performance of a stochastic gradient adaptive filter can be significantly improved by introducing a forgetting factor. The complexity of the original algorithm can also be reduced by using only the signs of error signals and input signals in the gradient adaptive step size computation     

Experiences with network-based user agents for mobile applications

Wireless networks are characterized by simple end devices and limited bandwidth. One solution to address these and other limitations of the wireless mobile environment that has been widely pursued is the placement of proxies, or agents, inside the network to assist with application processing that would normally take place on end devices. These agents can additionally manipulate data to reduce bandwidth requirements and assist in providing services. The design and implementation of a user agent is heavily impacted by the application it supports. In this paper we present our experiences with user agents in two different types of applications: telephony-based Personal Communication Services (PCS) and two-way messaging. To provide low latency service, the PCS user agents are mobile so that they may be kept close to their end devices. The design of the PCS agents limits migration overhead to the transfer of approximately 100 bytes of information in about 150 milliseconds. To provide advanced messaging services, the messaging user agent supports flexible messages while limiting air interface bandwidth usage. The messaging agents reduce uplink bandwidth usage by approximately 35% when applied to a cellular PCS system, and reduce message payloads by 97%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Network resource management for enterprise wide multimedia services

The support of broadband multimedia applications over an enterprise network poses a broad range of networking challenges for efficient resource management, intelligent switching, and access control for distributed information. We propose two server-based scheduling algorithms, with low computational complexity, to guarantee multimedia information synchronization at the destination, with minimum presentation delays and buffer requirements. We outline a communication framework, highlighting the issues and challenges faced by today's enterprise networks to support multimedia services. We describe the proposed connection establishment and resource allocation schemes in resource-constrained enterprise networks. The objective is to manage the limited resources of the network for maximum utilization. Towards this end we present a dynamic capacity allocation scheme to support connections for multiple users. Specifically, we show that the channel capacity allocation problem can be formulated as a quadratic programming problem. This allocation scheme is implemented at each intermediate switch to dynamically determine the capacity allocation. The effects of interswitch rate mismatch and network delay offset scheduling have also been incorporated in the management framework. In addition, we introduce the concept of route selection based on the requested network quality of service