Machining Characteristics and Corrosion Behavior of Grain Refined AZ91 Mg Alloy Produced by Friction Stir Processing: Role of Tool Pin Profile

In the present study, influence of friction stir processing (FSP) tool pin profile on the microstructure evolution, corrosion and machining characteristics of the AZ91 magnesium alloy was investigated. Three different pin profiles namely simple taper, threaded taper and square taper were selected and FSP was carried out at 1400 rpm and 25 mm/min tool travel speed. Microstructural observations indicated grain refinement from a starting grain size of 166.5–7.9, 22.1 and 4.08 µm for FSPed samples processed by simple taper, threaded taper and square taper pins, respectively. In all the FSPed samples, decreased amount of secondary phase (Mg₁₇Al₁₂) was observed compared with that of the unprocessed sample. From the X-ray diffraction analysis, it was observed that the square taper pin tool had induced higher texture effect compared with the other two FSP tools. From the electrochemical studies, the corrosion resistance of the sample processed with square taper pin tool was observed to be more in comparison to that of the other samples; which could be attributed to the texture effect and decreased fraction of secondary phase. Machining behavior assessed by conducting drilling experiments showed a significant influence of grain refinement on the cutting forces.     

Phenomena of reverse momentum pulse and fluid leak after poison injection in the shut down system of PHWR

The primary function of the shut down system in a nuclear reactor is to terminate any reactivity transient occurring in the core during its entire design life. Normally there is more than one system, which are independent and diverse in its mode of operation. They consist of quick acting mechanisms like dropping of safety rods by gravity, poison injection, etc. Typically in liquid poison injection system wherein high flow velocities are involved, there is significant fluid structure interaction associated with cyclic shock transients in the system. One such phenomenon has been captured and analyzed to understand the dynamics involved in the loop. The trends of loop pressure and vibration indicated presence of more than two pressure transients after complete injection of poison. The first transient arrived after 1.44 s and the second after 0.75 s. The reverse pressure pulses that manifested in the loop as a result of fast injection of fluid has been mathematically characterized by solving basic fluid balance equations. Possibility of ball lifting due to momentum pulse is also discussed.     

Relations and functions in multiset context

A multiset is a collection of objects in which repetition of elements is significant. In this paper an attempt is made to generalize the concepts of relation, function, composition and equivalence in the multiset context. As a pre-requisite a brief survey of the axiomatic approach to the multiset theory is also presented.     

Dynamic Loads in the Fan Containment Structure of a Turbofan Engine

In accordance with the FAA certification requirements, all modern commercial turbofan engines must successfully demonstrate its ability to withstand a fan blade-out (FBO) event through actual test. Possibility of losing a rotating fan blade from a running engine is a flight safety consideration, which must be addressed during the design phase of the engine. A typical fan blade-out event involves very complex nonlinear transient dynamics with large deflection of the release blade and rigid body rotation of the trailing blade as well as progressive failure and fragmentation of various components. Due to the nature of the impact type loading, the solution to the problem should also address dependence of the material behavior such as yield strength as a function of strain rates. In short, the transient dynamic analysis of a fan blade-out event highlights the complexity of the numerical technique, which includes all the nonlinearities of structural dynamics: plastic behavior of the materials, large displacements, and contact interaction between structural elements. In this paper, we present the results of a LS-DYNA simulation of a FBO event on a full-engine analytical model, which covers both the primary as well as secondary damages.     

Investigations on the thermal effects in non-circular journal bearings

A comparative study based on the thermal performance of elliptical and offset-halves journal bearings has been carried out by solving energy equation while assuming Parabolic Temperature Profile Approximation across the fluid film for faster computation of temperatures. Investigation for the rise in oil film temperatures, thermal pressures, load capacity, and power loss for three commercially available grade oils have been carried out for bearing configurations under study. It has been found that the offset-halves journal bearing runs cooler when compared with elliptical journal bearing profile with minimum power loss and good load capacity using Oil 2 as lubricant for which minimum thermal degradation has been observed.     

Frequency dependent electrical transport properties of 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine by impedance spectroscopy

The frequency dependent ac conduction mechanism in 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine (m-MTDATA) has been studied as a function of applied bias and temperature. The Cole–Cole plot shows a slightly depressed semicircle indicating Debye type relaxation. This result has been explained by an equivalent circuit of the device designed as a two parallel resistor and capacitance network in series with contact resistance. The ac conduction studies under dc bias for hole only devices shows an increase in device conductivity with the increase in bias. The variation of bulk resistance with applied bias indicates Space Charge Limited Conduction (SCLC) mechanism for hole conduction. The hole mobility of the material has also been evaluated from SCLC as 8.859 × 10^?6 cm²/V s. The temperature dependent impedance studies show two activation energies indicating two different phase of the material with a phase transition at 235 K.     

5th International Symposium on Electrochemical Impedance Spectroscopy Marilleva (Trento), Italy, June 2001

Preface

5th International Symposium on Electrochemical Impedance Spectroscopy Marilleva (Trento), Italy, June 2001     

The VVERs at KudanKulam

A Nuclear Power Project is being set-up at KudanKulam in the state of Tamil Nadu, India in collaboration with the Russian Federation. The project comprises of two units each of 1000 MWe VVER type reactor. The design of the plant and supply of all the major equipment is in the scope of the Russian Federation while development of infrastructure and project construction is in Indian scope of works. The VVER (Version V-412) reactor that is under construction at KudanKulam site is an advanced PWR, which incorporates all the features of a modern PWR as per the current Russian, Western and IAEA standards. The KudanKulam site in the southern Indian state of Tamil Nadu was one among the several sites evaluated by the Site Selection Committee, which cleared KudanKulam site for setting up an installed capacity up to 6000 MWe. The design, construction and operation of the plant meets the regulatory and licensing requirements of Russian regulatory body “RTN” as also India's Atomic Energy Regulatory Board. The supply of the equipment from the Russian Federation is on schedule and the project construction work by various Indian agencies is also ahead of schedule. The two units of KudanKulam Nuclear Power Project (KKNPP) are scheduled to achieve first criticality in the year 2007–2008. The paper discusses various design features, project construction and management aspects.     

Inducing safer oblique trees without costs

Abstract: Decision tree induction has been widely studied and applied. In safety applications, such as determining whether a chemical process is safe or whether a person has a medical condition, the cost of misclassification in one of the classes is significantly higher than in the other class. Several authors have tackled this problem by developing cost-sensitive decision tree learning algorithms or have suggested ways of changing the distribution of training examples to bias the decision tree learning process so as to take account of costs. A prerequisite for applying such algorithms is the availability of costs of misclassification. Although this may be possible for some applications, obtaining reasonable estimates of costs of misclassification is not easy in the area of safety .
This paper presents a new algorithm for applications where the cost of misclassifications cannot be quantified, although the cost of misclassification in one class is known to be significantly higher than in another class. The algorithm utilizes linear discriminant analysis to identify oblique relationships between continuous attributes and then carries out an appropriate modification to ensure that the resulting tree errs on the side of safety. The algorithm is evaluated with respect to one of the best known cost-sensitive algorithms (ICET), a well-known oblique decision tree algorithm (OC1) and an algorithm that utilizes robust linear programming.