Differential finishing of freeform surfaces (knee joint) using R-MRAFF process and negative replica of workpiece as a fixture

It is difficult and challenging to achieve uniform nanoscale surface finish in the contact zone, particularly on freeform (or sculptured) surfaces having different curvatures at different locations. Femoral (or, Knee joint component) is one of such biomedical freeform component which has complex profile along its curvature. Surface conditions of a femoral decide the life of the implant and they play a crucial role in its functionality. The variation in surface roughness of the femoral should be minimum in the contact zone. For this purpose, a special tooling is being proposed for rotational magnetorheological abrasive flow finishing (R-MRAFF) process. A negative replica of the workpiece (knee joint) as a tool (or a fixture) is used so that the medium flow velocity in the fluid flow channel is almost constant (or minimum possible variations) along the medium flow direction. It is able to do differential finishing also along the curvature. In addition, pulsating magnetic field has been used to generate vibrations in the medium in the finishing zone so that the possibility of fresh abrasive particles interacting with the surface of femoral is high. The surface finish has been achieved ranging from 26 nm to 62 nm using the proposed finishing technique and negative replica of the workpiece (femoral) as a fixture.     

Flow and temperature patterns in an inductively coupled plasma reactor: Experimental measurements and CFD simulations

Measurements of temperature patterns in an inductively coupled plasma (ICP) have been carried out experimentally. Plasma torch was operated at different RF powers in the range of 3–14 kW at near atmospheric pressure and over a wide range of sheath gas flow rate (3–25 lpm). Measurements were made at five different axial positions in ICP torch. The chordal intensities were converted into a radial intensity profile by Abel Inversion technique. Typical radial temperature profile shows an off‐axis temperature peak, which shifts toward the wall as the power increases. Temperatures in the range of 6000–14,000 K were recorded by this method. The temperature profiles in the plasma reactor were simulated using computational fluid dynamics (CFD). A good agreement was found between the CFD predictions of the flow and temperature pattern with those published in the literature as well as the temperature profiles measured in the present work. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3647–3664, 2014     

Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers

This research evaluates the effects of PLA/PP blend ratio and Lyocell/hemp mixture ratio on the morphology, water absorption, mechanical and thermal properties of PLA‐based composites. The composites were fabricated with 30 mass % hemp using compression moulding. As a reference composites made from PP were also studied. Combining of hemp and Lyocell in PLA composite leads to the reduction of moisture absorption and can improve the impact, tensile, flexural properties when compared with PLA/hemp. Composite based on the PLA/PP blend‐matrix could not improve the tensile and flexural properties compared with PLA/hemp, however; the lighter composite with better impact properties was obtained. The crystallization temperature of the PLA‐PP/hemp increased compared with pure PLA. This result was also confirmed by the SEM micrographs. The moisture absorption of PLA‐PP/hemp was higher than PLA/hemp. Based on theoretical analysis of DMTA data, there was favorable adhesion in all composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40534.     

Dendrimer as nanocarrier for drug delivery

Dendrimers are novel three dimensional, hyperbranched globular nanopolymeric architectures. Attractive features like nanoscopic size, narrow polydispersity index, excellent control over molecular structure, availability of multiple functional groups at the periphery and cavities in the interior distinguish them amongst the available polymers. Applications of dendrimers in a large variety of fields have been explored. Drug delivery scientists are especially enthusiastic about possible utility of dendrimers as drug delivery tool. Terminal functionalities provide a platform for conjugation of the drug and targeting moieties. In addition, these peripheral functional groups can be employed to tailor-make the properties of dendrimers, enhancing their versatility. The present review highlights the contribution of dendrimers in the field of nanotechnology with intent to aid the researchers in exploring dendrimers in the field of drug delivery.     

Propellant Gas Phase Chemical Kinetics

An adiabatic constant pressure chemical kinetic study of the AP gas phase is conducted. The objective is to examine the importance of chemical kinetic studies for propellant deflagration modelling in general and for AP in particular. A reaction mechanism consisting of ninety five elementary reactions involving twenty one chemical species is developed to represent the AP gas phase. An important parameter that can be obtained from the kinetics is the time rate of change of temperature of the gas phase at the condensed phase-gas phase boundary (dT/dt at t = 0). This is directly related to the heat feedback from the gas phase to the condensed phase. Comparison with earlier work indicates that the use of a one-step overall reaction could lead to underestimates of heat feedback from the gas phase by a factor of about four. In addition it is found that the rate of decrease of dT/dt at t = 0, with pressure is much larger at lower pressures, suggesting a possible gas phase role in the low pressure deflagration limit. Further, the kinetic study does not support the conclusion of a constant fraction of AP reacting in the condensed phase in the pressure range 20–100 atmospheres. These results are at variance with what is obtained by use of a one-step overall reaction. Thus, the one-step overall reaction cannot represent even qualitatively several gas phase characteristics important for deflagration studies, and its use leads to erroneous results. It is concluded that a full reaction mechanism representation of gas phase chemical kinetics is essential to AP deflagration modelling. The same conclusion is probably valid for propellant deflagration modelling in general.     

Fabrication and optimization of polypyrrole/cerium oxide/glassy carbon sensing platform for the electrochemical detection of flupirtine

Journal of Applied Electrochemistry - In spite of single nanomaterials, nanocomposites have come to be the superior modifying materials for electrochemical sensing. Herein, the highly...     

Composition and Recyclability Analysis of Poly(Vinyl Chloride) Recovered from Computer Power Cables and Commercial Wires

The product‐based recycling of the electrical and electronic devices and their by‐products are limited due to their complex characteristics and dissimilar material characteristics. However, such recycling procedures give clear ideas about the composition and possible recycling options of the materials present in them. Consequently, the present study deals with isolation and recycling of the major polymeric fraction present in the waste computer power supply cables (CPS) and electrical power supply (EPS) wires isolated from the household items. The composition analysis of CPS and EPS indicates that the poly(vinyl chloride) (PVC) is the major polymeric fraction along with minor content of polyethylene (PE) and polycarbonate (PC). Further, this research compares the mechanical recyclability of the PVC recovered from the CPS and EPS. Among the PVC's analyzed, PVC isolated from the EPS has been indicated superior mechanical properties. Similarly, thermal degradation analysis (TGA) indicated higher thermal stability for the PVC isolated from EPS. Besides, the flammability of the PVC specimens was studied and concluded with the possible mechanism occurring during combustion. Moreover, this study points out that PVC recovered from EPS and CPS can be mechanically recycled for the elimination of the waste. J. VINYL ADDIT. TECHNOL., 26:213–223, 2020. © 2019 Society of Plastics Engineers     

Biodegradation kinetic modeling of acrylic acid-grafted polypropylene during thermophilic phase of composting

Iranian Polymer Journal - This work aims at modelling and characterizing the kinetics of biodegradation of acrylic acid-grafted polypropylene. Different films of acrylic acid-grafted polypropylene...