Filtering Data Streams for Entity-Based Continuous Queries

The idea of allowing query users to relax their correctness requirements in order to improve performance of a data stream management system (e.g., location-based services and sensor networks) has been recently studied. By exploiting the maximum error (or tolerance) allowed in query answers, algorithms for reducing the use of system resources have been developed. In most of these works, however, query tolerance is expressed as a numerical value, which may be difficult to specify. We observe that in many situations, users may not be concerned with the actual value of an answer, but rather which object satisfies a query (e.g., "who is my nearest neighbor?”). In particular, an entity-based query returns only the names of objects that satisfy the query. For these queries, it is possible to specify a tolerance that is "nonvalue-based.” In this paper, we study fraction-based tolerance, a type of nonvalue-based tolerance, where a user specifies the maximum fractions of a query answer that can be false positives and false negatives. We develop fraction-based tolerance for two major classes of entity-based queries: 1) nonrank-based query (e.g., range queries) and 2) rank-based query (e.g., k-nearest-neighbor queries). These definitions provide users with an alternative to specify the maximum tolerance allowed in their answers. We further investigate how these definitions can be exploited in a distributed stream environment. We design adaptive filter algorithms that allow updates be dropped conditionally at the data stream sources without affecting the overall query correctness. Extensive experimental results show that our protocols reduce the use of network and energy resources significantly.     

Dynamic Modeling and Simulation of Impact in Tether Net/Gripper systems

The objective of this paper is to study the dynamic modeling andsimulation of a tether-net/gripper system during an impact, while it isbeing deployed or retrieved by a winch on a satellite orbiting aroundearth. We stick to Tether-Net system but the analysis is applicable toTether-Gripper systems too. We assume that the net is deployed from thesatellite in orbit and the motion is restricted to the orbital plane.This net captures a second satellite and tows it. The motion of atether-net system can be broken down into the following phases: (i)Phase 1: Net is shot out from the satellite with the tether completelyslack, (ii) Phase 2: Net comes to a location where the tether is tautwhile the drum on the orbiter is locked, (iii) Phase 3: Drum is unlockedand the net moves with the tether, (iv) Phase 4: Net captures a body.The continua (tether) is modeled using mode functions and coordinates.The theory of impulse and momentum can be used to model Phases 1, 2, and4 of motion of the tether-net system. The dynamics of the motion of thesystem in phase 3 is characterized by differential and algebraicequations (DAEs). Matlab ODE solvers were used to solve these DAEs.     

Enhancing spoken connected-digit recognition accuracy by error correction codes — A novel scheme

Recognizing spoken connected-digit numbers accurately is an important problem and has very many applications. Though state-of-the-art word recognition systems have gained acceptable accuracy levels, the accuracy of recognition of current connected spoken digits (and other short words) is very poor. In this paper, we develop a novel scheme to enhance the accuracy of recognizing a connected number. The basic idea proposed in this paper is to increase the number of digits in a number and use these appended digits to increase the overall accuracy of recognizing the number, as is done in the error-correcting code literature. We further show that the developed scheme is able to uniquely and exactly correct single-digit errors.     

Distributed Arithmetic based Split-Radix FFT

In this paper we have designed a Split-radix type FFT unit without using multipliers. All the complex multiplications required for this type of FFT are implemented using Distributed Arithmetic (DA) technique. A method is incorporated to overcome the result overflow problem introduced by DA method. Proposed FFT architecture is implemented in 180 nm CMOS technology at a supply voltage of 1.8 V.     

Effect of Temperature on Hydraulic Parameters of Cable-In-Conduit-Conductor of SST-1

Stable operation of superconducting magnets depend critically on the balance of heat deposition rate versus heat extraction rate by the cryo-coolant. Thus, the mass flow rate of the coolant in case of force-flow cooled superconducting magnet with Cable-In-Co-nduit-Conductor (CICC) construction becomes an important factor for optimum stability of magnets. The Toroidal and Poloidal Field magnets of Steady-state Superconducting Tokamak-1 (SST-1) is made of superconducting CICC with a void fraction of 40 %±2 %. For adequate cooling of magnets, supercritical helium at 4 bar and 4.5 K is forced-flown through the voids. Effect of temperature on mass flow rate and pressure drop in SST-1 CICC is studied in a 7 m long piece wound helically. The experimental friction factor of the CICC is also measured at different temperatures and flow rates and is compared with the standard Katheder equation and Tada equation. Also, based on the new findings obtained from the experimental results, the dimensionless Reynolds number has been slightly modified. This new number is used to propose a modified Katheder correlation for the friction factor in CICCs similar to that of SST-1.     

Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement,torsion and mechanical properties of aluminium

Severe plastic deformation improves the strength of a metal by strain hardening. Of the various severe plastic deformation processes, equal channel angular pressing proves to be the right candidate for bulk metal processing. Extensive works were carried out on equal channel angular pressing with channel angle ranging from 90° to 120 ° with or without back pressure on the exit channel. Numerical analyses suggest that reducing the channel angle below 90° would enhance the magnitude of strain imparted and, with prediction of a lesser strain homogeneity in such cases. Hence an acute angled equal channel angular pressing die with a back‐pressure notch sunken into the roof of the exit channel was designed, fabricated and was used for processing pure aluminium. Various mechanical properties of the processed materials were tested and acute angle processing imparted superior tensile strength to the work pieces in a single pass that would require several passes in a conventional equal channel angular pressing die. Substantial improvement in grain refinement and torsional properties was identified.     

Morphological exploration of chemical vapor–deposited P-doped ZnO nanorods for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting is beneficial and has received attractive attention due to a greater potential to generate hydrogen and oxygen from water by using plentiful solar light to solve the problem of energy crisis. Various active semiconductor materials are used in PEC water splitting applications. Nevertheless, in past decades, most of the researchers suggested that titanium oxide (TiO₂) is the best photoanode for this type of applications. Now, Zinc oxide (ZnO) is considered a perfect substitution to TiO₂ due to its comparable energy band structure and superior photogenerated electron transfer rate. In this study, bare and phosphorous-doped ZnO nanorods were successfully developed on fluorine-doped tin oxide-coated glass (FTO) substrate by chemical vapor deposition. X-ray diffraction (XRD) pattern authenticated hexagonal structure formation with strong diffraction peak of (101), which showed that ZnO nanorods were perfectly developed along c axis. The optical and morphological properties were analyzed by UV–Vis and scanning electron microscopy images. The energy-dispersive X-ray spectra demonstrated that doping agent phosphorous was present in ZnO nanorods. The PEC properties of the developed ZnO nanorods were further investigated and obtained results suggested that a small amount of phosphorous-doped ZnO nanorods enhances their PEC performance.     

Machining Characteristics and Corrosion Behavior of Grain Refined AZ91 Mg Alloy Produced by Friction Stir Processing: Role of Tool Pin Profile

In the present study, influence of friction stir processing (FSP) tool pin profile on the microstructure evolution, corrosion and machining characteristics of the AZ91 magnesium alloy was investigated. Three different pin profiles namely simple taper, threaded taper and square taper were selected and FSP was carried out at 1400 rpm and 25 mm/min tool travel speed. Microstructural observations indicated grain refinement from a starting grain size of 166.5–7.9, 22.1 and 4.08 µm for FSPed samples processed by simple taper, threaded taper and square taper pins, respectively. In all the FSPed samples, decreased amount of secondary phase (Mg₁₇Al₁₂) was observed compared with that of the unprocessed sample. From the X-ray diffraction analysis, it was observed that the square taper pin tool had induced higher texture effect compared with the other two FSP tools. From the electrochemical studies, the corrosion resistance of the sample processed with square taper pin tool was observed to be more in comparison to that of the other samples; which could be attributed to the texture effect and decreased fraction of secondary phase. Machining behavior assessed by conducting drilling experiments showed a significant influence of grain refinement on the cutting forces.     

A characterization of partial blocks in weighted graphs

Some of the classical connectivity concepts in Graph theory are generalized in this article. Strong and strongest strong cycles are introduced. Partial blocks are characterized using strongest paths. Some necessary and sufficient conditions for a weighted graph to be a partial block are also presented.