Assessment of Nutritional and Antioxidant Potential of Selected Vitality Strengthening Himalayan Medicinal Plants

Three Himalayan medicinal plants (Habenaria intermedia, H. edgeworthii, and Roscoea procera), widely used in vitality strengthening Ayurvedic formulations in India, were assessed for nutritional phytochemical constituents, and antioxidant activity. These target species emerged as a good source of minerals and possessed important micro elements. Individually, H. intermedia contained a high content of total phenols, thiamins, tannins, and calcium; R. procera was rich in potassium and iron content; and H. edgeworthii emerged as a good source of sodium. While various antioxidant assays provided evidences on the antioxidant potential of target species, greater antioxidant potential of H. intermedia as compared to the other two species was revealing. This study, therefore, highlighted the possibilities of harnessing nutritional and antioxidant potential of these species.     

An economic production lot size model with increasing demand, shortages and partial backlogging

In this paper, an economic production quantity model is developed for a production–inventory system where the demand rate increases with time, the production rate is finite and adjustable in each cycle over an infinite planning horizon and shortages are permitted. The cost of adjusting the production rate depends linearly on the magnitude of the change in the production rate. During the stock‐out period, a known fraction of the unsatisfied demands is backordered while the remaining fraction is lost. The model is formulated taking the demand rate as a general increasing function of time and the optimal production policy is obtained for the special case of a linearly increasing demand rate. The proposed model is also shown to be suitable for a prescribed time horizon. A procedure to find approximately the minimum total cost of the system over a finite time horizon is suggested. A numerical example is taken to illustrate the solution procedure of the developed model.     

On the interaction of electromagnetic fields with wire cagestructures

The authors address the problem of the interaction of electromagnetic fields with wire cage structures. The two canonical shapes considered are cubes and cylinders. The motivation for this work comes from a need to investigate electromagnetic field coupling (transient or broadband CW) to communication facilities or buildings with metallic rebar elements in the perimeter walls. Coupling calculations are performed by using NEC-2 computer codes and the experiments were performed at the Swiss MEMPS facility. MEMPS is a hybrid type of nuclear electromagnetic pulse (NEMP) simulator consisting of an impedance loaded elliptical structure with either a transient or a broadband CW excitation. Both types of excitations have been used in experimentally studying the coupling characteristics. In the case of cylindrical wire cage structures, both polarizations, i.e., incident electric field and incident magnetic field parallel to the cylinder axis, have been investigated. Good agreement is seen between the computed and measured result     

Characterization of deep level defects in Si irradiated with MeV Ar+ ions using constant capacitance time analyzed transient spectroscopy

An isothermal spectroscopic technique called time analyzed transient spectroscopy (TATS) in the constant capacitance (CC) mode has been used to characterize electrically active defects in the MeV Ar⁺ implanted silicon. The problems associated with high defect density and the presence of damaged region in the as-implanted material are overcome by CC-TATS method. The CC-TATS spectra of the as-implanted sample shows two positive peaks and an attendant negative peak. Two distinct traps have also been identified using thermally stimulated capacitance method modified to operate in constant capacitance mode. Variable pulse width measurements using CC-TATS show exponential capture kinetics in contrast to extremely slow capture observed in conventional deep level transient spectroscopy (DLTS) experiment. The results indicate that trapping behaviour is due to point-like defects associated with extended defects such as dislocation and stacking fault.     

Aloe vera incorporated biomimetic nanofibrous scaffold: a regenerative approach for skin tissue engineering

Aloe vera (AV) is one of the medicinal herbs with a well-established spectrum of wound healing, antimicrobial and anti-inflammatory property. AV-mediated therapeutics present significant tissue regenerative activity by modulating the inflammatory and proliferative phases of wound healing. The purpose of the present work was to combine the biological properties of AV and the advantages of electrospun meshes to prepare a potent transdermal biomaterial. The polycaprolactone (PCL) containing 5 and 10 wt % of lyophilized powder of AV was studied for electrospinning into nanoscale fiber mats and compared with PCL/Collagen blend for dermal substitutes. SEM revealed the average diameters of PCL, PCL-AV 5 %, PCL-AV 10 % and PCL/Collagen nanofiber scaffolds in the range of 519 ± 28, 264 ± 46, 215 ± 63 and 249 ± 52 nm, respectively. PCL-AV 10 % nanofiber scaffolds showed finer fiber morphology with improved hydrophilic properties and higher tensile strength of 6.28 MPa with a Young’s modulus of 16.11 MPa desirable for skin tissue engineering. The nanofibers were then used to investigate differences in biological responses in terms of proliferation and cell morphology of mice dermal fibroblasts. It was found that PCL-AV 10 % nanofibrous matrix favored cell proliferation compared to other scaffolds which almost increased linearly by (p ≤ 0.01) 17.79 % and (p ≤ 0.01) 21.28 % compared to PCL on sixth and ninth day. CMFDA dye expression, secretion of collagen and F-actin expression were significantly increased in PCL-AV 10 % scaffolds compared to other nanofibrous scaffolds. The obtained results proved that the PCL-AV 10 % nanofibrous scaffold is a potential biomaterial for skin tissue regeneration.     

Evidence that Fe-NTA-induced renal prostaglandin F2 alpha is responsible for hyperplastic response in kidney: implications for the role of cyclooxygenase-dependent arachidonic acid metabolism in renal tumor promotion

Oxidative stress in a tissue activates phospholipase A2 which releases free arachidonic acid. In addition, a low grade oxidative tone also stimulates the tissue cyclooxygenase activity. Cyclooxygenase-dependent arachidonic acid metabolites such as PGF 2 alpha are known to play an important role in the development and maintenance of hyperplasia in skin in response to the application of tumor promoters. In this study we show that Fe-NTA, an oxidant renal tumor promoter induces PGF 2 alpha which was maximum at 12 hours after Fe-NTA treatment. However, at all time points studied, the elevated levels of PGF 2 alpha have been observed. As a result of the induction of PGF 2 alpha, the hyperplastic response can also be observed in the histopathology of the tissue. Additionally, an increased incorporation of [3H]thymidine in renal DNA has also been observed. Pretreatment of animals with indomethacin suppresses Fe-NTA-mediated hyperproliferation suggesting a role of cyclooxygenase in Fe-NTA-mediated stimulation of hyperplastic activity. The pretreatment of animals with the chain breaking antioxidants, Vit. E, BHA and BHT were only partially effective in inhibiting Fe-NTA-mediated PGF2 alpha production, further suggesting a role of non-free radical-dependent mechanism in its production. Our data suggest that Fe-NTA-induced PGF2 alpha through the activation of cyclooxygenase is responsible for the development and maintenance of hyperplasia in kidney.     

Structural and biochemical changes in lungs of 3-methylindole-treated rats

This study compared co-amoxiclav, vancomycin and teicoplanin with and without netilmicin or amikacin for treating experimental subcutaneous fibrin-clot infection in rabbits due to a clinical beta-lactamase-positive methicillin- and gentamicin-resistant Staphylococcus epidermidis strain (MGRSE). MICs (mg/L) for this strain were: oxacillin 125, gentamicin 32, vancomycin 4, teicoplanin 8, netilmicin 1, amikacin 4, amoxycillin 64 with clavulanate at 2 mg/L. In rabbits treated with a single-dose i.v. regimen (netilmicin 8 mg/kg, amikacin 20 mg/kg, vancomycin 30 mg/kg, teicoplanin 15 mg/kg, co-amoxiclav 150-30 mg/kg), the bacterial count 24 h post-dose was reduced whatever the combination used (ANOVA, P < or = 0.001). Regimens were statistically classified in decreasing order of efficacy as follows: co-amoxiclav combined with netilmicin > vancomycin either alone or combined with either netilmicin or amikacin, teicoplanin with netilmicin > netilmicin and co-amoxiclav alone > teicoplanin or co-amoxiclav combined with amikacin, and teicoplanin alone > amikacin > no drug. From these findings, it is concluded that: co-amoxiclav could be useful for the treatment of beta-lactamase-positive and methicillin-resistant S. epidermidis infection; some enzyme-resistant aminoglycoside could be considered for treating gentamicin-resistant but netilmicin/amikacin-sensitive S. epidermidis infection; the combination of co-amoxiclav with netilmicin was synergistic and more rapidly bactericidal than vancomycin in this animal model.     

Particle motion in the fountain flow region during filling of a tube with a viscoelastic fluid

We present the results of an investigation of particle motion behind the advancing free surface during the filling of an initially empty tube with a viscoelastic fluid. Particle motion in the vicinity of an advancing free surface (the fountain flow region) is of significance in a number of processes used to form composite materials, notably injection and compression molding. This motion determines, to a large extent, the distribution of the reinforcing phase in the molded part. We show experimentally that an isolated spherical particle moves behind the interface in characteristic orbits, remaining in close proximity to the advancing free surface. This is in stark contrast to what happens in a Newtonian fluid. In that case, the particle is deposited on the tube walls by the fountain flow and never again reaches the faster moving free surface. The particle motion behind the interface is modeled with a combination of equations that describe the advection of the particle due to convective/fountain flow and its lateral migration due to viscoelasticity. This model neglects the finite size of the particle and is thus unable to capture the full details of the observed motion. However, the qualitative agreement between the experimental results and the modeling predictions suggests that the observed particle motion is the result of the combined effect of viscoelasticity and fountain flow.