Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness

Experimental investigation on the heat transfer and friction characteristics of rib-grooved artificial roughness on one broad heated wall of a large aspect ratio duct shows that Nusselt number can be further enhanced beyond that of ribbed duct while keeping the friction factor enhancement low. The experimental investigation encompassed the Reynolds number range from 3000 to 21,000; relative roughness height 0.0181–0.0363; relative roughness pitch 4.5–10.0, and groove position to pitch ratio 0.3–0.7. The effect of important parameters on the heat transfer coefficient and friction factor has been discussed and the results are compared with the results of ribbed and smooth duct under similar flow conditions. The present investigation clearly demonstrates that the heat transfer coefficient for rib-grooved arrangement is higher than that for the transverse ribs, whereas the friction factor is slightly higher for rib-grooved arrangement as compared to that of rectangular transverse ribs of similar rib height and rib spacing. The conditions for best performance have been determined. Correlations for Nusselt number and friction factor have been developed that predict the values within reasonable limits.     

Carbon Nanotube Growth on Calcium Carbonate Supported Molybdenum-Transition Bimetal Catalysts

A comparison of different catalyst systems (Fe–Mo, Co–Mo or Ni–Mo nanoparticles supported on calcium carbonate) has been performed in order to optimize the carbon nanotube (CNT) growth. The influences of the reaction temperature, metal loading and carbon source on the synthesis of CNTs were investigated. Dense CNT networks have been synthesized by thermal chemical vapor deposition (CVD) of acetylene at 720 °C using the Co–Mo/CaCO₃ catalyst. The dependence of the CNT growth on the most important parameters was discussed exemplarily on the Co catalyst system. Based on the experimental observations, a phenomenological growth model for CVD synthesis of CNTs was proposed. The synergy effect of Mo and active metals was also discussed.     

Thyroid hormones in diabetic ketoacidosis before and after therapy

Fifteen IDDM patients were evaluated for thyroid hormone abnormalities before and after control of diabetes mellitus/ketoacidosis. Blood sugar mean +/- SEM mg/dl on admission was 430 +/- 20.3 and after therapy fasting and post prandial blood sugar values were 120 +/- 14.5 and 150 +/- 20.2 respectively. GHb mean +/- SEM % on admission was 15.2 +/- 0.36. Serum T3 mean +/- SEM ng/dl of 0.36 +/- 0.04 was in hypothyroid range and rT3 mean +/- SEM ng/ml 0.40 +/- 0.6 was significantly raised (P < 0.001) before therapy. After metabolic control both T3 and rT3 became normal. T4 concentration mean +/- SEM meg/dl of 5.5 +/- 0.7 was well within normal range before therapy and rose to mean +/- SEM mcg/dl 8.8 +/- 0.5 after therapy (P < 0.01). TSH response to TRH was blunted in uncontrolled state. It is concluded that peripheral changes in T3, T4 and rT3 (low T3, high rT3 and low or normal T4) occurred in uncontrolled diabetic state during ketoacidosis. TSH response to TRH was blunted due to suppression of hypothalamic pituitary thyroid axis which takes more than a week for complete recovery.     

Cost analysis of a two-unit standby system under the influence of earthquakes

This paper deals with two models. In model 1, which is cold standby, when an earthquake comes the operation of the unit is stopped. In model 2, which is warm standby, a medium intensity earthquake will cause a short circuit failure mode. The repair is available immediately upon calling. In model 1, the failure rate is taken to be constant whereas the repair time distribution is arbitrary. In model 2, the failure and repair time distributions are considered to be arbitrarily distributed. Applying the regenerative theory in Markov renewal processes, various reliability characteristics of interest have been explicitly obtained.     

Solar energy conversion through phase transformations

Sodium thiosulphate pentahydrate and sodium sulphate decahydrate show appreciable potential differences and currents when the solid phase is in contact with its molten phase. the studies offer a new method for converting solar energy into electrical power.     

Activation status and function of the VLA-4 (alpha4beta1) integrin expressed on human melanoma cell lines

A highly sensitive microspectrophotometer was developed to measure spectral changes of oxyhemoglobin (oxy Hb) in single red blood cells (RBC) incubated with stimulated macrophages as a model of nitric oxide (NO) dependent cytotoxicity. Our microspectrophotometer, using a modified acousto-optic tunable filter (AOTF) and a 2-dimensional CCD array, allows fast spectrophotometric data acquisition. Human RBC treated with various concentrations of NO showed spectral changes due to the conversion of oxy Hb to methemoglobin (met Hb), in which the change in absorption differences at alpha (557 590 nm) and beta (542-525 nm) bands showed a linear relationship with the concentration of NO up to 100 microM. In contrast to highly diffusible NO, nitrite ions (NO2-) seem to enter RBC very slowly, resulting in negligible formation of met Hb in the presence of 5 mM glucose even during a prolonged incubation period. RBC were incubated with murine macrophages with and without lipopolysaccharide (LPS) in the presence of glucose for 24 and 40 h and subjected to the microspectrophotometric assay. The RBC incubated with LPS-stimulated macrophages showed significant changes in the spectrum due to NO-dependent conversion of oxy Hb to met Hb, which corresponded to the spectral changes of RBC treated with a several times higher concentration of NO than that in the culture medium. The trapping efficiency was calculated from the amounts of the NO released from macrophages and of the met Hb formed in the RBC, which gave a high efficiency (43%). The results suggest that RBC trap NO directly by cell cell interaction with macrophages. This spectrophotometric system is available for use with just a few drops of samples to study NO-specific cytotoxicity as a model of RBC without the use of any chemical reagent, in parallel with microscopic observations on changes of the cellular morphology under physiological conditions, such as membrane damage leading to hemolysis, adherence, and phagocytosis.     

Climate and built environment studies in universities — an Australian experience

Climate and built environment studies in Australian Universities, especially in the University of Queensland, are reviewed. By using examples of work in the tropical regions of Northern Australia and the Pacific Islands, current programmes which concern building and planning for communities with different cultural backgrounds are explained. A case is made for university studies which emphasise the integration of the natural and social sciences.     

Lattice Anomalies in (La,Sr)2CuO4 Under Epitaxial Strain Probed by Polarized X-Ray Absorption Spectroscopy

Local lattice anomalies in optimally doped T-(La,Sr)₂CuO₄ single crystal like thin films (T _c?=?43.4 K) grown by molecular-beam epitaxy have been studied by the in-plane polarized Cu K-edge extended X-ray absorption fine structure (EXAFS). The results indicate temperature-dependent local atomic displacements which are anomalous at the T _c and below a higher temperature T _s as demonstrated by a change in the mean square relative displacement of the Cu–O bond $\sigma _{{\rm Cu}-{\rm O}}^2$ , i.e., a sharp drop at the T _c and a gradual deviation from a noncorrelated Debye-like behavior below T _s where the spatial inhomogeneity appears. We find that the magnitude of the Cu–O displacement changes at the T _c, $\Delta \sigma _{{\rm Cu}-{\rm O}}^2$ is enhanced by compressive strain while the tendency of charge segregation is suppressed. The results suggest that the uniaxial pressure effects stabilize the system by decreasing the onset temperature and magnitude of spatial heterogeneity.     

OVSF Code Sharing and Reducing the Code Wastage Capacity in WCDMA

The non quantized nature of user rate wastes the code capacity in Orthogonal Variable Spreading Factor Codes (OVSF) based Code Division Multiple Access (CDMA) systems. The code sharing scheme in multi code CDMA is proposed to minimize the code rate wastage. The scheme combines the unused (wastage) capacity of already occupied codes to reduce the code blocking problem. Simulation results are presented to show the superiority of the proposed code assignment scheme as compared to existing schemes.