Hydrothermal synthesis of zirconium oxide nanoparticles and its characterization

The paper presents the preparation and investigations of zirconium oxide (ZrO₂) nanoparticles that were synthesized by hydrothermal method. The products were characterized by means of powder X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-absorption spectroscopy and photoluminescence (PL) spectroscopy. The crystal structure was determined using X-ray diffraction. The morphology and the particle size were studied using (SEM) and (TEM). The spherical shaped particles were confirmed through the SEM analysis. The transmission electron microscopic analysis confirmed the formation of the nanoparticles with the particle size. The FT-IR and Raman spectrum ascertained the strong presence of ZrO₂ nanoparticles. The optical properties were obtained from UV–visible absorption spectrum and also PL emission spectrum. The dielectric constant and the dielectric loss were measured as a function of frequency and temperature.     

Charge transport and structural morphology of HCl-doped polyaniline

The d.c. and a.c. (100 Hz–1 MHz) conductivities of HCl-doped polyaniline have been measured in the temperature range 77–300 K. At 77 K, the a.c. conductivity data, (), can be described by the relation ()=As, where the parameter s lies close to unity and decreases with increase in the doping level. The ratio of measured a.c. to d.c. conductivity shows dispersion at 77 K, which decreases with increase in the doping level. This decrease is found to be sharp around pH3.0. In the temperature range 77–150 K, the observed d.c. conductivity data can be described by Mott's three dimensional variable range hopping (VRH) model. Scanning electron microscopy studies reveal a sharp change in structural morphology of HCl-doped polyaniline at a pH3.0. A strikingly remarkable structural morphology has been observed in the formc of a channel at this pH value. This change is accompanied by a rapid increase in d.c. conductivity, dielectric constant, along with sharp changes in structural morphology, which indicates the existence of a doping-induced structural conductivity correlation in this system. © 1998 Chapman & Hall     

EPR study of Cu2+ in Na2O-NaF-B2O3-Bi2O3 glasses

Electron paramagnetic resonance (EPR) studies have been performed on the glass system (30–x) NaF-xNa₂O-50B₂O₃-20Bi₂O₃ doped with CuO as a paramagnetic probe. The calculated g values indicate that Cu²⁺ is in a tetragonally elongated octahedral co-ordination, and the Jahn-Teller character gives rise to anisotropic hyperfine structure. The spin-Hamiltonian parameters and -bonding parameter, ², are calculated. Varying the fluoride ion concentration and its effect on these parameters is also discussed.     

High order parameter-robust numerical method for time dependent singularly perturbed reaction–diffusion problems

We introduce a high order parameter-robust numerical method to solve a Dirichlet problem for one-dimensional time dependent singularly perturbed reaction-diffusion equation. A small parameter ε is multiplied with the second order spatial derivative in the equation. The parabolic boundary layers appear in the solution of the problem as the perturbation parameter ε tends to zero. To obtain the approximate solution of the problem we construct a numerical method by combining the Crank–Nicolson method on an uniform mesh in time direction, together with a hybrid scheme which is a suitable combination of a fourth order compact difference scheme and the standard central difference scheme on a generalized Shishkin mesh in spatial direction. We prove that the resulting method is parameter-robust or ε-uniform in the sense that its numerical solution converges to the exact solution uniformly well with respect to the singular perturbation parameter ε. More specifically, we prove that the numerical method is uniformly convergent of second order in time and almost fourth order in spatial variable, if the discretization parameters satisfy a non-restrictive relation. Numerical experiments are presented to validate the theoretical results and also indicate that the relation between the discretization parameters is not necessary in practice.     

A new approach for generating efficient sample from market basket data

Classical data mining algorithms require expensive passes over the entire database to generate frequent items and hence to generate association rules. With the increase in the size of database, it is becoming very difficult to handle large amount of data for computation. One of the solutions to this problem is to generate sample from the database that acts as representative of the entire database for finding association rules in such a way that the distance of the sample from the complete database is minimal. Choosing correct sample that could represent data is not an easy task. Many algorithms have been proposed in the past. Some of them are computationally fast while others give better accuracy. In this paper, we present an algorithm for generating a sample from the database that can replace the entire database for generating association rules and is aimed at keeping a balance between accuracy and speed. The algorithm that is proposed takes into account the average number of small, medium and large 1-itemset in the database and average weight of the transactions to define threshold condition for the transactions. Set of transactions that satisfy the threshold condition is chosen as the representative for the entire database. The effectiveness of the proposed algorithm has been tested over several runs of database generated by IBM synthetic data generator. A vivid comparative performance evaluation of the proposed technique with the existing sampling techniques for comparing the accuracy and speed has also been carried out.     

Simulation modelling and analysis of part and tool flow control decisions in a flexible manufacturing system

This paper presents the details of a simulation study carried out for analyzing the impact of scheduling rules that control part launching and tool request selection decisions of a flexible manufacturing system (FMS) operating under tool movement along with part movement policy. Two different scenarios have been investigated with respect to the operation of FMS. In scenario 1, the facilities such as machines, tool transporter and part transporter are assumed to be continuously available without breakdowns, whereas in scenario 2, these facilities are prone to failures. For each of these scenarios, a discrete-event simulation model is developed for the purpose of experimentation. A number of scheduling rules are incorporated in the simulation models for the part launching and tool request selection decisions. The performance measures evaluated are mean flow time, mean tardiness, mean waiting time for tool and percentage of tardy parts. The results obtained through the simulation have been statistically analyzed. The best possible scheduling rule combinations for part launching and tool request selection have been identified for the chosen FMS.     

Identifying some important success factors in adopting agile software development practices

Agile software development (ASD) is an emerging approach in software engineering, initially advocated by a group of 17 software professionals who practice a set of “lightweight” methods, and share a common set of values of software development. In this paper, we advance the state-of-the-art of the research in this area by conducting a survey-based ex-post-facto study for identifying factors from the perspective of the ASD practitioners that will influence the success of projects that adopt ASD practices. In this paper, we describe a hypothetical success factors framework we developed to address our research question, the hypotheses we conjectured, the research methodology, the data analysis techniques we used to validate the hypotheses, and the results we obtained from data analysis. The study was conducted using an unprecedentedly large-scale survey-based methodology, consisting of respondents who practice ASD and who had experience practicing plan-driven software development in the past. The study indicates that nine of the 14 hypothesized factors have statistically significant relationship with “Success”. The important success factors that were found are: customer satisfaction, customer collaboration, customer commitment, decision time, corporate culture, control, personal characteristics, societal culture, and training and learning.