Emulating DC constant power load: a robust sliding mode control approach

This article presents emulation of a programmable power electronic, constant power load (CPL) using a dc/dc step-up (boost) converter. The converter is controlled by a robust sliding mode controller (SMC). A novel switching surface is proposed to ensure a required power sunk by the converter. The proposed dc CPL is simple in design, has fast dynamic response and high accuracy, and offers an inexpensive alternative to study converters for cascaded dc distribution power system applications. Furthermore, the proposed CPL is sufficiently robust against the input voltage variations. A laboratory prototype of the proposed dc CPL has been developed and validated with SMC realised through OPAL-RT platform. The capability of the proposed dc CPL is confirmed via experimentations in varied scenarios.     

通过仿真确保信号完整性设计

PowerPC处理器能帮助实现快速灵活的可编程嵌入式平台设计.Virtex-4 FX平台利用集成于双PowerPC处理器的创新辅助处理器单元(APU)控制器,支持新的硬件加速应用.FX APU控制器又大大改善了软件算法的执行,提高了FPGA资源可用性.本文将介绍使用Xilinx/Ansoft 10Gbps背板设计套件确保互连性能.     

Product beamforming and nested array in tandem for enhanced sonar performance

Multidimensional Systems and Signal Processing - High-performance sonar systems mostly combine a large sensor array and an efficient beamformer for enhancing the overall detection capabilities and...     

Hybrid NOMA for Future Radio Access: Design,Potentials and Limitations

Wireless Personal Communications - Next-generation internet of things (IoT) applications need numerous low-powered wireless mobile devices to connect with each other, having ultra-reliability and...     

Improving the photocatalytic performance of TiO2 via hybridizing with graphene

In this paper an improvement in the photocatalytic performance of TiO₂ was carried out via hybridizing with graphene. Graphene-TiO₂ (GR-TiO₂)nanocomposites with different weight addition ratios of graphene oxide (GO) have been prepared via a facile microwave irradiation of GO and tetrabutyl titanate in isopropyl alcohol. Raman spectroscopy (RS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy (UV-vis), Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectroscopy (EDX) and photoluminescence spectra (PL) are employed to determine the properties of the samples. Microwave irradiation can heat the reactant to a higher temperature in a short time, simultaneously GO is reduced to graphene and TiO₂ nanoparticles grown on the surface of GR. GR-TiO₂ nanocomposites synthesized via this approach have efficient electron conductivity in GR, resulting in a reduced electron-hole recombination rate. Among the synthesized nanocomposites, GT-8wt% exhibited the best photocatalytic activity toward photocatalytic degradation of MB. Our current work provides a new insight for the fabrication of GR-TiO₂ nanocomposites within a short reaction time and also explains the mechanism of photocatalysis employing radical and hole scavengers.     

QoS-Friendly Wavelength Assignment in Dynamic Wavelength-Routed Optical Networks

In-band crosstalk has been widely considered as a major transmission impairment that significantly impacts the bit error rate (BER) performance of lightpaths in circuit-switched all-optical wavelength-routed networks. Such crosstalk usually occurs when multiple wavelengths pass through an optical crossconnect node, and the magnitude of the crosstalk is largely dependent on the wavelengths assigned to the lightpaths. Traditional wavelength assignment (WA) schemes pay little regard to the physical layer quality of service (QoS), and hence cannot provide optimized network performance in practical networks with imperfect physical transmission media. In this paper, we first present our categorization of in-band crosstalk based on the location of crosstalk generation, then we propose two QoS-friendly WA approaches, one of which selects the wavelength based on the estimated BERs, and the other based on the weighted crosstalk number counting. The two approaches have different computation complexities. Numerical results show that both approaches can significantly improve the BER blocking rate by suppressing the created in-band crosstalk, but the BER-based approach generally gives the better performance at the price of more extensive computation.This work was supported in part by DARPA Grants #N66001-00-1-8949 and #66001-01-1-8932 (co-funded by NSA).     

Short wavelength operation of the CH3F Raman FIR laser

Using the isotopic species¹³CH₃F in the methyl-fluoride Raman laser, we have observed kilowatt-level laser pulses which can be tuned over a series of intervals that are centered on pure-rotational transitions in thev ₃ ground state with initial-state J values between 35 and 43, inclusively. Taken together, these tuning intervals cover ～35% of the spectrum between 142 and 174 μm. Several straightforward improvements in the experimental setup, including the use of isotopically purer¹³CH₃F, should enhance the spectral coverage in this region.     

Structural,Optical, and Magnetic Properties of Mn-Doped Nickel Ferrite (Ni1-xMnxFe2O4) Thin Films Deposited by Jet Nebulizer Spray Pyrolysis Technique

Journal of Superconductivity and Novel Magnetism - In this work, pure and Mn-doped nickel ferrite (Ni1-xMnxFe2O4, x?=?0, 3, 6, 9, and 12 wt%) thin films were prepared using facile...