Performance analysis of a double calcium looping‐integrated biomass‐fired power plant: Exploring a carbon reduction opportunity

Integrating biomass energy generation with carbon capture will result in “carbon neutral” to “carbon negative” technology. Countries like India and China possess significant reserves of limestone. Calcium looping (CaL) technology can prove to be a promising option for carbon capture in these countries. The present work aims at improving the performance of CaL‐integrated biomass‐fired power plant (BFPP) by exploring different looping configurations. In this study, (i) standalone BFPP, (ii) conventional CaL (single stage), and (iii) double CaL‐integrated BFPP have been systematically evaluated. A comparative performance evaluation of these three plants in terms of energy, exergy and ecological assessment, has been carried out. A detailed parametric study and unit‐wise exergy analysis of the best configuration among the three are presented to identify the scope for further improvement in efficiency and energy savings.     

Lipid‐derived monoamide as phase change energy storage materials

One of the major shortcomings of current organic phase change materials (PCMs) is their relatively low melting points, typically below 80°C, which limits their integration into thermal energy storage (TES) systems. The present work was aimed at developing lipid‐derived PCMs with increased melting points which would be suitable for TES applications requiring higher melting points without compromising other key properties such as enthalpy. The introduction of an amide group into the structure of linear saturated fatty acids was used as a means to increase intermolecular interactions and therefore crystallization and melting points. A series of six linear monoamides with differing chain length and symmetry about the amide group were investigated for thermal stability, thermal transition, flow behavior, and crystal structure to establish the structure‐property relationships relevant to TES. The presence of the highly polar amide group in the aliphatic fatty acid–derived molecules resulted in notable improvement in performance compared with the analogous monofunctional molecules: Increases in melting points (79°C‐96°C) and high enthalpies of fusion (155‐201 J/g) were recorded. Fundamental relationships between structure, processing, and macroscopic physicochemical properties, never before elucidated, were revealed in the study. The study revealed a step‐like variation of macroscopic properties: a surprising outcome of the competition between intermolecular attractions, symmetry effects, and mass transfer limitations. The predictive structure‐function relationships established in this work will allow the straightforward engineering of monoamide architectures that can extend the range of organic PCMs and deliver thermal properties desirable for TES applications.     

Evaluating the Performance of CHIRPS Satellite Rainfall Data for Streamflow Forecasting

Water Resources Management - Streamflow forecasting can offer valuable information for optimal management of water resources, flood mitigation, and drought warning. This research aims in evaluating...     

Studies on dechlorination of DDT (1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane) using magnesium/palladium bimetallic system

The aim of our investigation was to compare the rates of dechlorination of DDT using Mg0/Pd4+ system in two different reaction phases, namely, water-acetone and 0.05% biosurfactant in water. Since palladium is expensive and its toxicity effects are not well known we also examined the reuse efficiency of Pd0 immobilized on alumina for dechlorinating DDT. Studies on the dechlorination of DDT in water-acetone (1:1, v/v) and 0.05% biosurfactant phases revealed that the reaction followed second order kinetics and rate of reaction is dependent upon both initial concentrations of the target compound and Mg0/Pd4+. The presence of acid enhanced the rate of reaction by providing protons and preventing passivation of metal that occurs due to deposition of magnesium hydroxide. GC-MS analyses revealed the formation of completely dechlorinated hydrocarbon skeleton of DDT namely, diphenylethane (DPE), as the end product in both reaction phases (water-acetone and 0.05% biosurfactant in water) thereby implying the removal of all five chlorine atoms (three alkyl and two aryl) of DDT. The optimum ratio of water and acetone to facilitate successful dechlorination reaction was found to be 9:1. Results suggested that salt form (K2PdCl6) of palladium had higher potential to dechlorinate DDT as compared to pellet (Pd0-alumina) form (efficiencies of 95 and 36%, respectively, for 100 ppm initial concentration of DDT). We noted that Pd0-alumina pellets could be reused at least four times for successful dechlorination of DDT provided Mg0 granules are present in sufficient quantity. Technical grade DDT (50 ppm) containing significant amounts of DDD was dechlorinated almost completely by the Mg0/Pd4+ (10mg/0.2mg/ml) within 1h in water-biosurfactant phase. Our studies reveal that Mg/Pd system is a promising option due to its high reactivity and its ability to achieve complete dechlorination of DDT. This bimetallic system may be useful for designing indigenous permeable barriers or reactors for the treatment of DDT contaminated water.     

Preconcentration and solid phase extraction method for the determination of Co, Cu, Ni, Zn and Cd in environmental and biological samples using activated carbon by FAAS

2-{[1-(2-Hydroxynaphthyl) methylidene] amino} benzoic acid (HNMABA) was synthesized for solid phase extraction (SPE) to the determination of Co, Cu, Ni, Zn and Cd in environmental and biological samples by flame atomic absorption spectrophotometry (FAAS). These metals were sorbed as HNMABA complexes on activated carbon (AC) at the pH range of 5.0+/-0.2 and eluted with 6 ml of 1M HNO3 in acetone. The effects of sample volume, eluent volume and recovery have been investigated to enhance the sensitivity and selectivity of proposed method. The effect of interferences on the sorption of metal ions was studied. The concentration of the metal ions detected after preconcentration was in agreement with the added amount. The detection limits for the metals studied were in the range of 0.75-3.82 microg ml(-1). The proposed system produced satisfactory results for the determination of Co, Cu, Ni, Zn and Cd metals in environmental and biological samples.     

Sensory evaluation of black pigmented rice (Oryza sativa cv. Poireton) wine fortified with probiotic Lactobacillus acidophilus ATCC 4356 and Lactobacillus sakei ATCC 15521 using fuzzy logic

Rice wine was prepared in the laboratory from a black pigmented rice (cv. Poireton) using standardized methodology. The wine was fortified with the probiotic strains Lactobacillus acidophilus ATCC 4356 and Lactobacillus sakei ATCC 15521 and allowed to undergo a storage period of 28 days at 4°C. These rice wines were compared with a commercial wine used as a standard reference wine. A panel consisting of 30 judges performed the sensory evaluation. The scores obtained were based on the quality attributes of colour, taste, aroma and alcoholic strength. Analysis of the sensory scores and ranking of the different samples were performed using fuzzy analysis. The quality attributes were also ranked according to their importance in the overall acceptability. Colour and alcoholic strength were accorded the highest importance, compared with aroma and taste, as quality attributes. The rice wines were rated as ‘not satisfactory’, ‘fair’, ‘medium’, ‘good’ and ‘excellent’ on the sensory scale. Out of the wines prepared, black pigmented rice wine fortified with L. acidophilus was the most acceptable and was ranked as ‘good’, which was also at par with the commercial wine. On the other hand, black pigmented rice wine fortified with L. sakei and black pigmented rice wine fortified with L. acidophilus and L. sakei were ranked in the ‘satisfactory’ category followed by the unfortified wine ranked in the ‘fair’ category. Copyright © 2015 The Institute of Brewing & Distilling     

Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242

This paper develops an experimentally validated computational model based on crystal plasticity for the analysis of two-phase α/β Ti-6242 polycrystalline alloys. A rate-dependent elastic-crystal plasticity model is incorporated in this model to accommodate anisotropy in material behavior and tension-compression asymmetry inherent to this alloy. A combination of microtesting, orientation imaging microscopy, computational simulations, and minimization process, involving genetic algorithms, is implemented in this study for careful characterization and calibration of the material parameters. Size effects are considered in this analysis through a simple scaling process. A homogenized equivalent model of the primary α with transformed β colonies is developed for incorporation in the Ti-6242 FE model. The polycrystalline Ti-6242 computational model incorporates accurate phase volume fractions, as well as statistically equivalent orientation distributions to those observed in the orientation imaging microscopy scans. The effects of orientation, misorientations, and microtexture distributions are investigated through simulations by this computational model. The model is used to simulate constant strain rate and creep tests in compression and tension, and the results are compared with experiments. The effects of microstructure and creep-induced load-shedding on the localization of microstructural stresses and strains are studied for potential crack initiation criteria.     

Wave Interaction with a Flexible Porous Breakwater in a Two-Layer Fluid

An analysis has been carried out to study the performance of a flexible porous plate breakwater in a two-layer fluid where each fluid is assumed to be of finite depth and the breakwater is extended over the entire water depth. The problem is analyzed in two dimensions with the assumption of small amplitude wave theory and plate response. The effects of both surface and internal waves are taken into account in the present study. The associated mixed boundary value problem is reduced to a linear system of equations by utilizing a more general orthogonal relation along with least squares approximation method. The reflection and transmission coefficients for the surface and internal modes, wave load, and breakwater response are computed for various physical parameters of interest to analyze the efficiency of the flexible porous plate as a breakwater in the two-layer fluid.