Effect of Silicon and Graphite Degeneration on High-Temperature Oxidation of Ductile Cast Irons in Open Air

Oxidation of Metals - The use of high silicon ductile irons is increasing as they offer some advantages with respect to conventional pearlitic–ferritic grades such as high elongation at...     

Fabrication of Barium Strontium Titanate (Ba0.6Sr0.4 TiO3) 3D Microcomponents from Aqueous Suspensions

This study reports on the fabrication of BST (Ba_0.6Sr_0.4TiO₃)‐based 3D microcomponents through an aqueous colloidal approach. The BST powder was synthesized by solid‐state reaction assisted by thermal analysis and XRD diffraction. Well crystalline cubic BST single phase was obtained upon heat‐treating the precursor powder mixture at 1200°C–1250°C. The reactivity of the BST powder toward water was evaluated by the changes in pH and concentration of leached ionic species along aging time. Hydrolysis reactions were suppressed by chemisorbing a suitable phosphate‐based protective agent and enabled an excellent dispersion ability to be achieved. Aqueous suspensions with solids loadings as high as 50 vol% that are stable against hydrolysis for several days could easily be prepared from the surface‐treated BST powder in aqueous solutions of an epoxy resin. After adding a suitable hardener, the colloidal suspensions could easily be cast into soft silicon rubber molds to obtain homogeneous and high dense green BST bodies.     

Effect of Storage Conditions and Antioxidants on the Oxidative Stability of Sunflower–Chia Oil Blends

The mixture of different proportions of sunflower with chia oil provides a simple method to prepare edible oils with a wide range of desired fatty acid compositions. Sunflower–chia (90:10 and 80:20 wt/wt) oil blends with the addition of rosemary (ROS), ascorbyl palmitate (AP) and their blends (AP:ROS) were formulated to evaluate the oxidative stability during storage at two temperature levels normally used, cool (4 ± 1 °C) and room temperature (20 ± 2 °C) for a period of 360 days. Peroxide values (PV) of the oil blends with antioxidants stored at 4 ± 1 °C showed levels ≤10.0 mequiv O₂/kg oil; the lowest levels of PV were found for blends with AP:ROS. Values higher than 10.0 mequiv O₂/kg were observed between 120–240 days for oil blends stored at 20 ± 2 °C. Similar trends were observed with p-anisidine and Totox values. The oxidative stability determined by the Rancimat method and differential scanning calorimetry showed a greater susceptibility of the oils to oxidative deterioration with increasing unsaturated fatty acids content. The addition of antioxidants increased the induction time and decreased the Arrhenius rate constant, indicating an improvement in the oxidative stability for all the oil blends. Temperature had a strong influence on the stability of these blends during storage.     

Effect of polymer structure on the molecular dynamics and thermal behavior of poly(allyl acetoacetate) and copolymers

In this paper, dielectric and calorimetric studies of the small-molecule glass former allyl acetoacetate monomers as well as its newly synthetized homopolymer and copolymers with different styrene composition were performed in both the liquid and glassy states. The molecular dynamics studies by the broadband dielectric spectroscopy and the stochastic temperature modulated differential scanning calorimetry enabled us to explore relaxation processes of examined materials in the wide frequency range. We found that the copolymers reveal two co-existing glass transitions characterized by the glass transition temperatures, which are very close to those of the corresponding homopolymers. These results suggest that the copolymers exhibited some sequences of acetoacetate units with a microphase-separated morphology in agreement with the value of reactivity ratio previously determined. We investigated effects of copolymerization compositions on the glass transition temperature, the isobaric fragility index, the dielectric and calorimetric intensity, and the dynamic heterogeneity on the glass transitions of the materials.     

Complete Characterization of the O-Antigen from the LPS of Aeromonas bivalvium

Aeromonas species are found in the aquatic environment, drinking water, bottled mineral water, and different types of foods, such as meat, fish, seafood, or vegetables. Some of these species are primary or opportunistic pathogens for invertebrates and vertebrates, including humans. Among the pathogenic factors associated with these species, there are the lipopolysaccharides (LPSs). LPSs are the major components of the external leaflet of Gram-negative bacterial outer membrane. LPS is a glycoconjugate, generally composed of three portions: lipid A, core oligosaccharide, and O-specific polysaccharide or O-antigen. The latter, which may be present (smooth LPS) or not (rough LPS), is the most exposed part of the LPS and is involved in the pathogenicity by protecting infecting bacteria from serum complement killing and phagocytosis. The O-antigen is a polymer of repeating oligosaccharide units with high structural variability, particularly the terminal sugar, that confers the immunological specificity to the O-antigen. In this study, we established the structure of the O-chain repeating unit of the LPS from Aeromonas bivalvium strain 868 E^T (=CECT 7113^T = LMG 23376^T), a mesophilic bacterium isolated from cockles (Cardium sp.) and obtained from a retail market in Barcelona (Spain), whose biosynthesis core LPS cluster does not contain the waaE gene as most of Aeromonas species. After mild acid hydrolysis, the lipid A was removed by centrifugation and the obtained polysaccharide was fully characterized by chemical analysis and NMR spectroscopy. The polymer consists of a heptasaccharide repeating unit containing D-GalNAc, L-Rha, D-GlcNAc, and D-FucNAc residues.     

Assessment of heavy metal levels in Almendares River sediments--Havana City, Cuba

The Almendares River watershed covers a large portion of Havana, Cuba and is centrally important to both recreational and other activities in the region. In order to assess current water quality conditions prior to planned remediation efforts, the spatial distribution of six heavy metals and other compounds were determined in river sediments at fifteen sampling stations in the watershed. Metal concentrations in sediments ranged from 86.1 to 708.8 for Zn, 39.3 to 189.0 for Pb, 71.6 to 420.8 for Cu, 84.4 to 209.7 Cr, 1.5 to 23.4 for Co, and 1.0 to 4.3 for Cd microg/g dry weight sediment. Calculated enrichment factors (EF; measured metal versus background mineral conditions) were almost always greater than 1.0, suggesting significant anthropogenic impact on metal levels in the river. The highest EF values were seen immediately below Cotorro (EF>10 for Pb, Cu, and Cd), a suburban town that has an active secondary smelter, and below the largest municipal landfill in Havana (EF>10 for Pb, Cu, Cd, and Zn). Further, three sampling stations had multiple metals at concentrations higher than probable effects concentrations (PEC), implying possible local ecotoxicological impacts. Finally, sequential extractions of the sediments indicated that heavy metals were largely associated with the organic fraction, and it was estimated that up to 62% of metals in the sediments would be susceptible to release back into the water column if hydraulic or other changes occurred in the river. These data are being used to prioritize decisions related to the remediation of the river system.     

Laser‐induced surface structures on gold‐coated polymers: Influence of morphology on surface‐enhanced Raman scattering enhancement

The fabrication of highly sensitive and reproducible substrates for Surface‐Enhanced Raman Scattering (SERS) remains a challenging scientific and technological issue. In this work, laser‐induced periodic surface structures are generated on poly(trimethylen terephthalate) films upon laser irradiation with the linearly polarized beams of a Nd:YAG laser (4th harmonic, 266 nm), an ArF excimer laser (193 nm), and a Titanium:sapphire laser (795 nm), resulting in periods close to the laser wavelength when irradiating at normal incidence, and larger periods for different angles of incidence. Additional irradiation with a circularly polarized beam at 266 nm produces superficial circular structures. The nanostructured polymers are coated with a nanoparticle assembled gold layer by pulsed laser deposition at 213 nm. The capabilities of these substrates for SERS are evaluated using benzenethiol as a test molecule and different degrees of Raman signal enhancement are observed depending on the nanostructure type. The highest enhancement factor is obtained by for nanostructured substrates with the highest values of period, depth, and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42770.     

Comparison of four commercial DNA extraction kits for PCR detection of Listeria monocytogenes, Salmonella, Escherichia coli O157:H7, and Staphylococcus aureus in fresh, minimally processed vegetables

Four commercial DNA extraction methods, PrepMan Ultra (Applied Biosystems), InstaGene Matrix (BioRad), DNeasy Tissue kit (Qiagen), and UltraClean (MoBio), were tested for PCR detection of Listeria monocytogenes, Escherichia coli O157: H7, Salmonella, and Staphylococcus aureus in fresh, minimally processed vegetables. For comparative purposes, sensitivity assays with specific PCRs were carried out after DNA extraction with the four methods in green pepper, broccoli, and onion artificially inoculated with the four pathogens separately. As confirmed by statistical analysis, the DNeasy Tissue kit rendered the highest sensitivity values in the three matrices assayed for Salmonella, L. monocytogenes, and E. coli O157:H7 and in onion for S. aureus. Despite being the most expensive of the methods compared, the DNeasy Tissue Kit can be successfully applied for any of the four most commonly studied pathogens, thus saving time and overall reducing the cost of the analysis.     

Anisakid larvae in the musculature of the Argentinean hake, Merluccius hubbsi

We report the infection levels of third-stage anisakid larva in the muscle of the Argentinean hake, Merluccius hubbsi, in relation to fish size and location in the musculature. The musculature of 42 hake was separated into hypaxial (ventral) and epiaxial (dorsal) parts and surveyed for nematode larvae. Two anisakid species were detected: Anisakis sp. (prevalence, 52.4%; mean +/- SD abundance, 1.2 +/- 1.7) and Pseudoterranova sp. (prevalence, 9.5%; mean +/- SD abundance, 0.2 +/- 0.7). Since the fish were gutted after capture, the occurrence of anisakids in the flesh indicates that the worms had migrated into the muscle before capture. The number of Anisakis sp. in muscle was not correlated with fish length or weight. Therefore, fish size cannot be used as a predictor of parasite loads in the muscle. Only one Anisakis sp. and one Pseudoterranova sp. appeared in the epiaxial musculature. The density of Anisakis sp. in the hypaxial muscles was significantly higher than that in the epiaxial ones. This suggests that removal of the hypaxial musculature can reduce the risk of anisakid-induced allergies and gastrointestinal anisakidoses among consumers.