Experimental evaluation of the impact of b-learning methodologies on engineering students in Spain

The aim of this article is to highlight the importance of an active learning methodology in engineering degrees in Spain. We present the outcomes of an experimental study carried out during the academic years 2007/2008 and 2008/2009 with engineering students at the University of Salamanca (Spain). In the present research, as we have done in previous ones, we have selected a subject which is common to the four degrees under consideration: Computer Science. This study explores in greater depth the validity of experimental designs coming from educational research and the impact of innovative teaching methodologies. The hypothesis that impulses this research is formulated to ascertain that the learning level and the satisfaction of students will be higher after the implementation of new teaching methodologies (based on constructive learning, collaborative work, and blended learning resources), than in more traditional teaching contexts. The obtained results partially confirm this hypothesis. The ultimate purpose of this work is that of providing evidence that contributes to the improvement of education and teaching methods for a better performance of students in engineering.     

Correlation between polyethylene topology and melt flow instabilities by determining in-situ pressure fluctuations and applying advanced data analysis

Using three high sensitive pressure transducers located inside a slit-die of a capillary rheometer and applying a set of advanced mathematical tools to process the acquired time dependent pressure signals, we are able to detect in-situ pressure fluctuations associated with sharkskin instabilities. Other distortions, as spurt and gross melt fracture, can also be in-situ detected. This originates from a factor of 10³ and 10² improvement in terms of time and pressure resolution achieved using the new set-up and data analysis that it will be described in detail in this article. Our approach quantifies the effect of polymer topology and shear rate on the characteristic frequency and amplitude of these pressure fluctuations inside the die. Depending on the polymer structure and the shear rate, different instabilities with large deviation in their main properties at melt-state, can be determined. Based on our results, a polymer-independent power law relationship between the characteristic frequency of the instability and the apparent shear stress has been found. Combining this new technique with the advanced mathematical analysis used, clear evidences concerning the origin and location of these instabilities, could be established. According to our analysis, the spurt instability starts in the entrance of the die and it propagates downstream while increasing its velocity along the die. This was confirmed by non-zero-time-lags in the cross-correlation function between the transducers located inside the slit-die. In case of sharkskin instability, pressure fluctuations inside the die indicate that its origin could also be already inside the die instead of being exclusively located at the die-exit region, as stated in earlier investigations.     

Does a Cleaner Thames Pass an Economic Appraisal?

Abstract

Due to substantial clean-up efforts, water quality in the River Thames in London has steadily improved over the last three decades. However, London's Victorian sewage system still discharges untreated sewage into the Thames, at times of moderate to heavy rainfall. This happens approximately 60 times every year, creating adverse environmental and amenity impacts on the river. Major and costly engineering works will be required to solve the sewage overflow problem. This paper reports the results of a stated preference study designed to value the multiple non-market benefits—eductions in sewage litter, risk to human health, and risk to fish populations—associated with a range of potential engineering solutions. Our findings indicate that household willingness to pay for these benefits is likely to be significantly greater than the projected costs per household of, at least, some potential technical solutions. Although arguably justifiable on economic grounds, the final decision on whether to proceed with such a large infrastructure project is unlikely to depend wholly on cost-benefit thinking, but involve complex trade-offs with other socially desirable criteria.     

Volatile and semi-volatile components of oak wood chips analysed by Accelerated Solvent Extraction (ASE) coupled to gas chromatography–mass spectrometry (GC–MS)

Volatile and semi-volatile compounds of French and American oak wood used in wine and spirits ageing were extracted by an Accelerated Solvent Extractor (ASE) and analysed by gas chromatography–mass spectrometry. More than 90 compounds were isolated, characterised and quantified after being separated on two chromatographic columns with distinct polarity. The main oak wood components were quantitatively determined by using standard reference compounds. In addition, a number of compounds, mainly guaiacol and syringol derivatives, were detected and characterised. In particular, 10 compounds were tentatively identified as lignin dimers derivatives, whose presence in oak wood chips or barrels for wine and spirits ageing had not been previously described. Several of the characterised compounds enabled a distinction to be drawn between medium and high toasted wood chips, independently of their geographical origin.     

Polymeric electro-mechanic devices applied to antibiotic-controlled release

Polymeric electroactive blends formed by electropolymerized aniline inside a non-conductive polyacrylamide porous matrix were already shown as suitable materials for the electrocontrolled release of model compounds like safranin. In this paper the intermolecular interactions between the two components of the blend are put in evidence by Raman spectroscopy measurements. Also, in situ optical microscopy was used to follow changes occurring in the polyaniline/polyacrylamide blend during pyrocathecol violet release tests. These two sets of experiments show the possibility of controlling electrochemically the release of both, safranin (a cation) and pyrocathecol violet (an anion) and allow to infer a release mechanism based on the electromechanical properties of the blends explaining the dependence of the release kinetics on the applied potential. Tetracycline release curves for different potentials and pHs are shown and the obtained profiles are in agreement with those expected for a device acting as an electrochemically driven pump due to the artificial muscle properties of the conducting phase of the blends.     

Natural and synthetic oviposition stimulants forCatolaccus grandis (Burks) females

Oviposition behavior was elicited fromCatolaccus grandis (Burks) (Hymenoptera: Pteromalidae) females, an ectoparasitoid of the boll weevil,Anthonomus grandis Boheman (Coleoptera: Curculionidae), by smears of freshly cut cotton bolls or smears of extracts prepared with boll weevil damaged or undamaged cotton boll tissues. Oviposition behavior was also elicited fromC. grandis females by smears made withn-pentane,n-hexane,n-heptane, and isooctane. This is the first report of oviposition behavior elicited for any parasitoid by these short-chain saturated hydrocarbons (alkanes), introducing a new concept on the chemical mediation of parasitoid behavior during host selection. Oviposition behavior was also elicited fromC. grandis females by volatiles emanating from an artificial diet devoid of insect components that was specifically developed for the in vitro rearing of ectoparasitoids. The possible use of a synergistic combination ofn-hexane and diet to optimize the mechanized production of noncontaminated eggs is also discussed.Mention of a commercial or proprietary product does not constitute an endorsement by the USDA.     

Modulation of human dermal microvascular endothelial cell and human gingival fibroblast behavior by micropatterned silica coating surfaces for zirconia dental implant applications

Dental ceramic implants have shown superior esthetic behavior and the absence of induced allergic disorders when compared to titanium implants. Zirconia may become a potential candidate to be used as an alternative to titanium dental implants if surface modifications are introduced. In this work, bioactive micropatterned silica coatings were produced on zirconia substrates, using a combined methodology of sol–gel processing and soft lithography. The aim of the work was to compare the in vitro behavior of human gingival fibroblasts (HGFs) and human dermal microvascular endothelial cells (HDMECs) on three types of silica-coated zirconia surfaces: flat and micropatterned (with pillars and with parallel grooves). Our results showed that cells had a higher metabolic activity (HGF, HDMEC) and increased gene expression levels of fibroblast-specific protein-1 (FSP-1) and collagen type I (COL I) on surfaces with pillars. Nevertheless, parallel grooved surfaces were able to guide cell growth. Even capillary tube-like networks of HDMEC were oriented according to the surface geometry. Zirconia and silica with different topographies have shown to be blood compatible and silica coating reduced bacteria adhesion. All together, the results indicated that microstructured bioactive coating seems to be an efficient strategy to improve soft tissue integration on zirconia implants, protecting implants from peri-implant inflammation and improving long-term implant stabilization. This new approach of micropatterned silica coating on zirconia substrates can generate promising novel dental implants, with surfaces that provide physical cues to guide cells and enhance their behavior.     

Photosensitized degradation in water of the phenolic pesticides bromoxynil and dichlorophen in the presence of riboflavin, as a model of their natural photodecomposition in the environment

Within the context of environmentally friendly methods for the elimination of surface-water pollutants, the photodegradation of the phenolic pesticides bromoxynil (BXN) and dichlorophen (DCP) under simulated natural conditions has been studied. The work was done in the presence of the visible-light absorber photosensitizer riboflavin (Rf), usually present in trace quantities in natural waters. Under aerobic conditions, an efficient photooxidation of both pesticides was observed. The relatively intricate photochemical mechanism involves pesticide and oxygen consumption and, to a lesser extent, Rf degradation. The kinetic and mechanistic study supports that both H(2)O(2) and singlet molecular oxygen, O(2)((1)Δ(g)), are involved in the process. Kinetic data for the O(2)((1)Δ(g))-mediated oxidation indicate that BXN and DCP are photodegraded with this species faster than the parent compound phenol, very frequently employed as a model for aquatic contaminants, likely due to their lower pK(a) values. This observation allows the design of phenolic pesticides with different photodegradation rates under environmental conditions.     

Low-fat frankfurters formulated with a healthier lipid combination as functional ingredient: microstructure, lipid oxidation, nitrite content, microbiological changes and biogenic amine formation

Oil (healthier lipid combination of olive, linseed and fish oils)-in-water emulsions stabilized with different protein systems (prepared with sodium caseinate (SC), soy protein isolate (SPI), and microbial transglutaminase (MTG)) were used as pork backfat replacers in low-fat frankfurters. Microstructure, lipid oxidation, nitrite content, microbiological changes and biogenic amine formation of frankfurters were analyzed and found to be affected by the type of oil-in-water emulsion and by chilling storage (2° C, 41 days). Although the lipid oxidation levels attained were low, replacement of animal fat by healthier oil combinations in frankfurter formulation did promote a slight increase in lipid oxidation. Residual nitrite was affected (P < 0.05) by formulation and storage. Only 51-61% of the added nitrite was detectable in the product after processing and 17-46% at the end of storage. The microbial population was low in all formulations during chilling storage. Spermine was the most abundant amine (19-20 mg/kg), but similar in level to all samples.