Magnetization distribution of magnetic vortex of amorphous FeSiB investigated by electron holography and computer simulation

The three-dimensional spin structure of the magnetic vortex of FeSiB, an amorphous soft magnetic material, was investigated by holography observation and computer simulation. Magnetization distribution in the neighborhood of the vortex center was estimated from the phase distribution obtained by holography observation. To confirm this magnetization distribution, sample-tilting experiments were performed: when the sample was tilted with respect to the electron beam direction, the phase-image center was found to shift along the tilting axis. Finite-element computer simulation was carried out to estimate the amount of shifts of the phase-image center in the sample tilting from the experimental magnetization distributions in the no sample-tilting conditions. We found that the simulated shifts of the phase-image center were in good agreement with those in the sample-tilting experiment, thus confirming the magnetization distribution near the vortex center obtained by holography observation.     

Control scheme for optimizing the interferometer phase bias in a symmetric-Mach-Zehnder-type all-optical switch

A control scheme for accurately optimizing (and also automatically stabilizing) the interferometer phase bias of symmetric-Mach-Zehnder (SMZ)-type ultrafast all-optical switches is proposed. In this control scheme, weak continuous-wave light is used as supervisory input light and its spectral power ratio at the switch output is used as a bipolar error signal. Our experimental results for 168-Gb/s 16:1 demultiplexing with a hybrid-integrated SMZ switch indicate the feasibility and the sensitivity of this control scheme.     

Growth energetics of Lactococcus lactis subsp. lactis biovar diacetylactis in cometabolism of citrate and glucose

Certain strains of lactic acid bacteria present in commercial cheese starters, characterized by faint transparent colonies on an agar plate containing 1 mg kg ⁻¹ crystal violet (CVT), were identified as Lactococcus lactis subsp. (ssp) lactis biovar diacetylactis. The effect of citrate on the growth of these strains (CVT strains) in the presence of glucose was studied, in comparison with L. lactis strains. Molar growth yield from glucose (Y_G, g dry weight/mole of glucose consumed) for CVT strains grown on glucose plus citrate was significantly higher than the control (i.e. without citrate), but not for other L. lactis strains tested. Enhanced Y_G was also observed at a pH-controlled experiment, indicating that enhanced Y_G did not result from a buffering effect of citrate. CVT strains, in contrast to other strains of the same species, were shown to obtain enough energy to enhance Y_G on glucose–citrate mixtures.     

Ytterbium-decreasing Streptomyces sp. and its naphthoquinone-pigment production in the presence of rare-earth elements

We screened for oligotrophic microorganisms capable of decreasing the concentration of ytterbium (Yb), a representative of the heavy rare-earth elements, in a culture medium. From 476 strains of oligotrophic microorganisms (grown on 1/100 diluted nutrient agar) isolated from soil and river water samples, 5 strains capable of reducing the concentration of Yb in diluted nutrient broth containing 5 ppm Yb were selected. Among them, a strain capable of reducing the concentration of all rare-earth elements to a great extent was identified as Streptomyces sp. (strain YB-1). This strain produced redish-purple pigment(s) only in the presence of rare earths, but not in that of other metals. The pigment was extracted with ethyl acetate and purified by a series of column chromatography steps. From the results of structural analysis using ultraviolet or infrared absorption spectrometry and 13C-NMR, the pigment was determined to be a kind of naphthoquinone similar to nanaomycin produced by a Streptomyces sp. These results suggested that rare earths might affect the physiological activity of this strain.     

Effects of high pressure treatments on intramuscular connective tissue

The changes in the morphological structure and proteoglycan (PGs) extractability of the intramuscular connective tissues from bovine skeletal muscle exposed to high pressure (100～400 MPa) were investigated and compared to those in muscle during ageing. SDS-PAGE profiles of the PGs were also studied. During ageing, structural changes in the endomysium and perimysium occured, and disruption of the honeycomb-like structure of endomysium was observed. In the pressurized muscle, deformation of the honeycomb-like structure of endomysium was accelerated with increase of pressure applied to the muscle, and disruption of endomysium was observed in several places in the muscle pressurized at 400 MPa. Changes in the extractability of PGs were not observed in the pressurized muscle, whereas the extractability of PGs decreased with ageing. Changes in the density of the main component in the PGs with molecular mass of more than 3000 kDa on the SDS-PAGE were not observed in the PGs from the pressurized muscle, whereas the density of this band gradually decreased during the ageing. The decrease in the amounts of PGs extracted from the aged muscle seems to be due to degradation of the PGs into small dialysable molecules. From the results, it seems that high pressure treatment has some different effects on intramuscular connective tissue to ageing. ?     

Advanced Method for Measuring Proteinase A in Beer and Application to Brewing*

Proteinase A, excreted from yeast cells into beer during fermentation in the brewing process, has been shown to degrade foam-active proteins and to decrease foam stability. In order to improve the measurement of this enzyme in beer, a new fluorescent peptide, MOCAc-Ala-Pro-Ala-Lys-Phe-Phe-Arg-Leu-Lys (Dnp)-NH₂, was synthesised and applied to the accurate and rapid estimation of proteinase A in commercial beer and fermenting wort. This novel substrate is several hundred times more sensitive to proteinase A than other previously reported synthetic substrates or native protein substrates. The concentration of proteinase A in beer is closely related to foam stability and proteinase A activity was found to increase gradually during fermentation. The concentration of proteinase A excreted from yeast cells is also closely related to the vitality of pitching yeast cells. This new method was successfully applied to the evaluation of yeast vitality and the development of optimum yeast handling procedures.     

Iterative receiver employing phase noise compensation and channel estimation for millimeter-wave OFDM systems

This paper proposes an iterative OFDM millimeterwave receiver employing low-complexity decision-directed phase noise compensation (DD-PNC) to alleviate degradation due to the phase noise. High bit-rate OFDM transceivers based on the single-chip Si RF-CMOS IC technology in the 60-GHz millimeter-wave band have been extensively studied for wireless personal area network (WPAN) systems, and the relatively large phase noise in the phase locked loop (PLL) synthesizer severely degrades transmission performance. The proposed OFDM receiver iterates DD-PNC and decision-directed channel estimation (DDCE) by exploiting the output of the channel decoder. DDPNC estimates the phase noise each sampling time by using the decoder output, and then it removes the estimate from a time-domain received signal. In addition, DDCE estimates a channel impulse response by using the compensated received signal. Computer simulations demonstrate that in the 64QAM modulation with the coding rate of 3/4, the proposed receiver with DD-PNC and DDCE can perfectly remove the phase noise of -85 dBc/Hz at 1 MHz offset, and that it can alleviate the degradation of the channel estimation due to the phase noise.     

Compensation of oxygen defects in La-silicate gate dielectrics for improving effective mobility in high-k/metal gate MOSFET using oxygen annealing process

Oxygen incorporation for compensation of oxygen defects is investigated with La-silicate dielectrics in directly contacted with the Si substrate. The amount of oxygen is controlled by the temperature of annealing in oxygen atmosphere (oxygen annealing) and the thickness of the gate electrode. The positive shift in flatband voltage (V_FB) by oxygen incorporation is an experimental evidence for defects compensation in La-silicate dielectrics. Optimum oxygen annealing provides the V_FB shift toward positive direction without increasing equivalent oxide thickness (EOT). Although the oxygen annealing degrades the interfacial property at La-silicate/Si interface, subsequent forming gas annealing (FGA) can recover the interfacial property. It is experimentally revealed that the positive V_FB shift of La-silicate dielectrics is stable even after subsequent FGA. The supplied oxygen in La-silicate is expected to maintain even after reducing process. Movement of Fermi level toward the Si valence band edge caused by oxygen incorporation is successfully observed by XPS. Moreover, no chemical reaction between La-silicate and Si substrate by oxygen annealing are confirmed from TEM observation and analyses of X-ray photoelectron spectra. It is experimentally demonstrated that effective hole mobility can be improved without increase in EOT by combination of oxygen annealing and FGA.     

Thermoelectric Generation Using Water Lenses

A solar light concentrator composed of water and plastic transparent film has been designed. This flexible lens design can trace the solar movement through control of the tensile stress and amount of water, and concentrate the solar energy onto the thermoelectric (TE) module surface. An experimental water lens was constructed, and the concentrated intensity was monitored by a photodiode as a function of x–z position; For example, when 3.0 kg water was filled and tension of 69.0 N/m was applied to the transparent vinyl sheet, the concentration ratio was evaluated as the maximum of 28.0 at a depth of 657 mm from the water lens bottom surface. TE generation was tested to show the validity of the water lens. The surface condition of the receiver was found to be critical.     

A sub-0.5-V operating embedded SRAM featuring a multi-bit-error-immune hidden-ECC scheme

The mobile multi-media applications require to lower the operating voltage of embedded SRAMs. The ECC circuit implementation for increasing soft-error and the access timing control that tracks access delay fluctuation in memory core should be considered for the low-voltage operation. A hidden error-check-and-correction (HECC) scheme compensated the access time penalty caused by the ECC logic on the output critical path. And a multi-column ECC word assignment (MCE) increased the multi-bit-error immunity while using only 1-bit-correctable ECC which minimized area penalty. A source-level-adjusted direct sense amplifier (SLAD) and a write-replica circuit with an asymmetrical replica memory cell (WRAM) for the device-fluctuation-tolerant access control were also designed. A 130-nm CMOS 32-Kbit SRAM-macro was fabricated with these circuit techniques, which demonstrated: 1) 0.3-V operation with 6.8 MHz; 2) 30-MHz operation which is feasible for mobile use even at 0.4 V, while keeping 960MHz at 1.5 V; and 3) a reduction by 3.6/spl times/10/sup 5/ in soft-error rate compared with that of conventional ECC.