Linear stability analysis of hydrodynamic journal bearings under micropolar lubrication

The dynamic characteristics of hydrodynamic journal bearings lubricated with micropolar fluids are presented. The modified Reynolds equation is obtained using the micropolar lubrication theory. Applying the first order perturbation of the film thickness and steady state film pressure, the dynamic characteristics in terms of the components of stiffness and damping coefficients, critical mass parameter and whirl ratio are obtained with respect to the micropolar property for varying eccentricity ratios and slenderness ratios. The results show that micropolar fluid exhibits better stability in comparison with Newtonian fluid.     

Enhanced granulation by natural ionic polymer additives in UASB reactor treating low-strength wastewater

Effect of natural ionic polymer additives on granulation in lab-scale UASB reactors treating low-strength synthetic wastewater (COD 750-850 mg/L) was examined. The organic loading rate was 1.477+/-0.118 kgCOD/m3/day. Under identical conditions four similar reactors were operated in parallel with the following additives: control with no additive, anionic part of Reetha (Sapindus trifoliata) extract, cationic part of Reetha extract, and Chitosan. By the end of the study period, Chitosan as an additive produced largest granules with mean size of 0.15 mm closely followed by the cationic fraction of the Reetha extract with mean size of 0.144 mm, and anionic fractions of the Reetha extract with 0.139 mm. Control reactor with no additives had the smallest size granules with mean size of 0.128 mm. The fraction of granules in the sludge bed of size >0.1 mm showed similar trend. The largest granule size observed in the reactors with additives was 4-5mm as compared to 2 mm in the control reactor. Cationic polymers were more effective additives for enhancing sludge granulation. Exo-cellular protein, lipid, sugar and total polymer increased with granulation in the reactors. A COD removal efficiency of 95-98% was achieved in all the reactors.     

FINITE ELEMENT MODELING OF THREE-DIMENSIONAL TRANSIENT HEAT TRANSFER IN STAINLESS STEEL (304) PULSED GTA WELDMENTS

Pulsed current gas tungsten arc welding involves a large number of process parameters, and hence makes it difficult, if not impractical, to develop the procedure for a given application. A numerical model such as the finite element model will be of great use to study the effect of process parameters on heat transfer and attendant characteristics. A procedure for development of a three-dimensional transient nonlinear finite element model is presented in this article. Sensitivity analysis has been carried out to check the response of the model to constant and temperature-dependent material properties, heat loss due to vaporization of alloying elements, and total number of nodes to model the solution domain. Experimental work on thermal profiles and weld bead dimensions has been carried out to validate the results predicted by the model. Finally, parametric studies have been carried out to study the combined effects of parameters that influence the heat input.     

Tertiary treatment of distillery wastewater by nanofiltration

Tertiary treatment of aerobically treated distillery wastewater by nanofiltration was carried out in a spiral wound nanofiltration membrane module under different operating conditions. The results show that the percentage separation of organic and inorganic compounds was quite high, as reflected by the reduction of chemical oxygen demand (COD) and total dissolved solids (TDS) in the range of 96–99.5%, and 85–95% respectively. The color removal was in the range of 98–99.5%. The results of the effect of variation of the inlet concentration, feed circulation rate and pH conform to the mechanism of gel layer formation. Gel layer formation and Concentration polarization was found to play a major role in the treatment of distillery waste using nanofiltration (NF) membrane. It was observed that as concentration of feed solution increases the permeate flux was reduced. This change was higher compared to the separation of COD and TDS. The result indicates that the NF membrane showed very high performance efficiency for organic components (96–99.5%), as indicated by COD removal. In comparison, the separation of inorganic compounds was found to be in the range of 25–90% as estimated from relative separation of COD and TDS. The present study shows that nanofiltration is a promising technique for recovery of water from distillery waste, which could be used to achieve zero discharge status and solve a major environmental problem.     

Consumption of brown rice: a potential pathway for arsenic exposure in rural Bengal

This study assesses the arsenic (As) accumulation in different varieties of rice grain, that people in rural Bengal mostly prefer for daily consumption, to estimate the potential risk of dietary As exposure through rice intake. The rice samples have been classified according to their average length (L) and L to breadth (B) ratio into four categories, such as short-bold (SB), medium-slender (MS), long-slender (LS), and extra-long slender (ELS). The brown colored rice samples fall into the SB, MS, or LS categories; while all Indian Basmati (white colored) are classified as ELS. The study indicates that the average accumulation of As in rice grain increases with a decrease of grain size (ELS: 0.04; LS: 0.10; MS: 0.16; and SB: 0.33 mg kg(-1)), however people living in the rural villages mostly prefer brown colored SB type of rice because of its lower cost. For the participants consuming SB type of brown rice, the total daily intake of inorganic As (TDI-iAs) in 29% of the cases exceeds the previous WHO recommended provisional tolerable daily intake value (2.1 μg day(-1) kg(-1) BW), and in more than 90% of cases, the As content in the drinking water equivalent to the inorganic As intake from rice consumption (C(W,eqv)) exceeds the WHO drinking water guideline of 10 μg L(-1). This study further demonstrates that participants in age groups 18-30 and 51-65 yrs are the most vulnerable to the potential health threat of dietary As exposure compared to participants of age group 31-50 yrs, because of higher amounts of brown rice consumption patterns and lower BMI.     

A study on the adsorption mechanism of mercury on Aspergillus versicolor biomass

The adsorption behavior of mercury on Aspergillus versicolor biomass (AVB) has been investigated in aqueous solution to understand the physicochemical process involved and to explore the potentiality of AVB in pollution control management. This biomass has been successfully used for reducing the mercury concentration level in the effluent of chloralkali and battery industries to a permissible limit. The results establish that 75.6 mg of mercury is adsorbed per gram of biomass. The adsorption process is found to be a function of pH of the solution, with the optimum range being pH 5.0-6.0. The process obeys the Langmuir-Freundlich isotherm model. Scanning electron microscopic analysis demonstrates a conspicuous surface morphology change of the mercury-adsorbed biomass. A nearly uniform distribution of metal ions on the mycelial surface excepting a few aggregation points is revealed by X-ray elemental mapping profiles. The results of zeta potential measurement, Fourier transform infrared (FTIR) spectroscopy, and blocking of the functional groups by chemical modification reflect the binding of mercury on the biomass occurs through electrostatic and complexation reactions. The accumulation of mercury on the cell wall associated with negligible diffusion and or transportation into cytoplasm finds support from the results of adsorption kinetics and transmission electron micrographs. Mercury adsorption on biomass also leads to elongation of cells and cytoplasmic aggregation of spheroplast/protoplasts, indicating that the cell wall acts as a permeation barrier against this toxic metal.     

Analysis of steady-state characteristics of misaligned hydrodynamic journal bearings with isotropic roughness effect

The present work deals with the concept of a stochastic process to solve the problem of isotropic steady-state characteristics of hydrodynamic journal bearings of finite width, considering two types of misalignment, axial (vertical displacement) and twisting (horizontal displacement). Using a finite-difference method, the steady-state film pressures are obtained by solving a Reynolds type equation based on the principle of isotropic roughness pattern. With the help of the steady-state film pressures, the steady-state performance characteristics, in terms of load-carrying capacity, attitude angle, leakage flow-rate, friction coefficient and misalignment moment of a journal bearing with the slenderness ratio of unity, are obtained for various values of isotropic roughness parameter, eccentricity ratio and degree of misalignment.     

Microwave Preparation of SiO2-B2O3-Na2O-K2O-CaO-Fe2O3-TiO2 Glass System

This study reports preparation of glass composition （54.50 wt.%） SiO2, （10.80 wt.%） B2O3, （14.20 wt.%） Na2O, （1.20 wt.%） K2O, （6.00 wt.%） CaO, （4.00 wt.%） Fe2O3 and （9.30 wt.%） TiO2 by melt quenching method using direct microwave heating and conventional resistive heating. Study of dielectric loss factor of the glass as function of temperature illustrated increasing loss factor above 370 ℃, 550 ℃, 650 ℃ and 900 ℃, indicating enhanced microwave absorption by the glass at above these temperatures. Chemical analysis results of both the glasses depicted more volatilization loss of volatile ingredients in conventional heating. The study of chemical durability was performed from leachate analysis describing less leaching of Na2O, K2O and other constituents from glass melted in microwave furnace. Glass transition temperatures （Tg） were found to be 576.3 ℃ and 569.5 ℃ for glass melted in conventional and microwave heating route, respectively. Laboratory experiment of glass melting utilizing microwave energy as an alternate heating source demonstrated 70%-75% electrical power saving.