Experimental Phase Diagram Investigations in the Ni-Rich Part of Al-Fe-Ni and Comparison with Calculated Phase Equilibria

The phase equilibria in the section Ni₃Fe-Ni₃Al and phase boundaries of γ′(Ni₃Al) at 1000 °C were studied by a combination of powder X-ray diffraction (XRD), differential thermal analysis (DTA), and electron probe microanalysis (EPMA). The existence of a continuous solid solution at 450 °C was confirmed by a linear decrease of the lattice parameter from Ni₃Al to Ni₃Fe. The phase boundaries of γ′ with γ and the B2-type phase were determined at 1000°C by EPMA. A vertical section of the phase diagram from Ni₃Al to Ni₃Fe above 450 °C, including the liquidus temperatures, is proposed based on the DTA investigations. The invariant four-phase equilibrium U: L + γ′ = γ + B2 is found to occur at 1366 ± 1 °C. The experimental data are compared with a calculated phase diagram obtained by extrapolation from the corresponding binary data sets.     

Time-resolved GISAXS and cryo-microscopy characterization of block copolymer membrane formation

Time-resolved grazing-incidence small-angle X-ray scattering (GISAXS) and cryo-microscopy were used for the first time to understand the pore evolution by copolymer assembly, leading to the formation of isoporous membranes with exceptional porosity and regularity. The formation of copolymer micelle strings in solution (in DMF/DOX/THF and DMF/DOX) was confirmed by cryo field emission scanning electron microscopy (cryo-FESEM) with a distance of 72 nm between centers of micelles placed in different strings. SAXS measurement of block copolymer solutions in DMF/DOX indicated hexagonal assembly with micelle-to-micelle distance of 84–87 nm for 14–20 wt% copolymer solutions. GISAXS in-plane peaks were detected, revealing order close to hexagonal. The d-spacing corresponding to the first peak in this case was 100–130 nm (lattice constant 115–150 nm) for 17 wt% copolymer solutions evaporating up to 100 s. Time-resolved cryo-FESEM showed the formation of incipient pores on the film surface after 4 s copolymer solution casting with distances between void centers of 125 nm.     

Bioaccumulation of mercury in benthic communities of a river ecosystem affected by mercury mining

The presence of mercury in the river Idrijca (Slovenia) is mainly due to 500 years of mercury mining in this region. In order to understand the cycling of mercury in the Idrijca ecosystem it is crucial to investigate the role of biota. This study is part of an ongoing investigation of mercury biogeochemistry in the river Idrijca, focusing on the accumulation and speciation of mercury in the lower levels of the food chain, namely filamentous algae, periphyton and macroinvertebrates. Mercury analysis and speciation in the biota and in water were performed during the spring, summer and autumn seasons at four locations on the river, representing different degrees of mercury contamination. Total (THg) and methyl mercury (MeHg) were measured. The results showed that the highest THg concentrations in biota correlate well with THg levels in sediments and water. The level of MeHg is spatially and seasonally variable, showing higher values at the most contaminated sites during the summer and autumn periods. The percentage of Hg as MeHg increases with the trophic level from water (0.1-0.8%), algae (0.5-1.3%), periphyton (1.6-8.8%) to macroinvertebrates (0.1-100%), which indicates active transformation, accumulation and magnification of mercury in the benthic organism of this heavily contaminated torrential river.     

High exposure to arsenic from drinking water at several localities in eastern Croatia

This study investigated the relationship between arsenic concentrations in drinking water in four towns/villages in eastern Croatia and corresponding hair arsenic concentrations of residents. The mean arsenic concentrations in community drinking water samples were 0.14, 37.88, 171.60, and 611.89 microg/l. The corresponding mean concentrations of the element in hair samples of subjects residing in each of the localities were 0.07 (n=11), 0.26 (n=17), 1.74 (n=11), and 4.31 microg/g (n=23). Chronic exposures to arsenic levels estimated in three investigated locations could present a serious health threat to around 3% of Croatian population.     

Immunoelectron localization of mitochondrial F1 factor in cryosections of heart muscle cells

Immunocytochemistry was used to investigate the localization of F1 ATPase in mitochondria of cryosections of adult mouse heart muscle cells. The initial aldehyde fixation was the only denaturation step for antigens. The fine structure was preserved with contrast enhancement as the sections were maintained hydrated, with the advantage that the entire procedure is completed in one working day. The reaction was highly specific, and entire mitochondria were labeled with the Protein A-gold complex. A new analytical technique, electron spectroscopic imaging (ESI), contributed to a better visualization of the localization of the F1 factor.     

Hydrogen from renewable palm kernel shell via enhanced gasification with low carbon dioxide emission

Hydrogen economy has become more attractive with the energy crises and environmental issues associated with fossil fuel utilization more so with the discovery that hydrogen can be produced from renewable biomass. This provides good prospects to Malaysia that generates abundant palm wastes. Nevertheless, there is still limited knowledge on kinetics parameters for hydrogen production from palm kernel shell (PKS) gasification. Hence, this work aims to develop a mathematical model that is able to describe the kinetics of steam gasification of PKS with in situ CO₂ capture while considering tar formation. A mean-squared error minimization approach has been used to estimate the kinetics parameters of the gasification process. Using the calculated kinetics parameters the process efficiencies are profiled with respect to the effect of gasification temperature, steam/biomass ratio and sorbent/biomass ratio. The parametric study indicates that the three variables promote hydrogen production at different degree of influence. This developed model can be further extended to incorporate optimization study on the potential clean production of hydrogen from PKS.     

Estimating vulnerability to risks: an application in a biofuel supply chain

In the present work, we propose a theoretical model to identify and prioritize risks involved in a biofuel supply chain. We adopt a set of indicators associated with determinant factors of the supply chain to identify risks that are characterized through a risk matrix. We consider the five largest world biodiesel producers and included China due to its global market importance and potential impacts of its growth on the environment and society. To determine the impacts and the probability of occurrence of risks, we use the Canberra distance, as metrics. To facilitate the analysis and interpretation, a convenient manner is to express the results in terms of matrices. To exemplify the potentiality of the scheme and for the sake of simplicity, a more comprehensive discussion is focused on the Brazilian case, restricted to the Technology and Innovation, and Integration, Logistics and Infrastructure determining factors (dimensions) of the biodiesel supply chain. Concerning these determining factors, the Brazilian biodiesel chain shows strong vulnerability when compared with developed and developing countries, despite that the evolution of the data over recent years indicates small improvements in Integration, Logistics and Infrastructure dimension. Although in this work the calculations are restricted to the Canberra distance, the present approach may be applied to other distances to compare or validate the results. This work presents a contribution to model vulnerability to risks, providing to policy makers and stakeholders a tool to design, analyze and improve sustainability system by measuring its risks. The study of the contribution of each indicator suggests corrections to be taken and which indicators should be prioritized.     

Psychic Distance,its Business Impact and Modes of Coping: A Study of British and Indian Partner SMEs

This paper reports one of the first investigations to analyze inter-partner perceptions of psychic distance between two countries. Its empirical focus is British and Indian SMEs engaged in business with each other. It examines different dimensions of psychic distance, their impact and modes of coping with them. Potential firm-level and individual influences are also taken into account. The paper aims to transcend some of the conceptual and methodological limitations of previous research on the subject and to identify the theoretical and practical implications that arise. A ‘mirror’ approach is applied, accessing both partners’ perceptions. These are assessed through a ‘mixed’ method combining quantitative measurement with qualitative interpretations. Psychic distance dimensions are found to vary in their impact on doing business with the other country, and there is also variation according to the firm’s sector. There is considerable asymmetry in British and Indian partners’ perceptions of psychic distance but the degree of difference between their psychic distance evaluations lacks predictive power. Culturally embedded psychic distance dimensions tend to have less impact and to be easier to cope with than institutionally embedded dimensions. Four categories of coping are identified. The principal theoretical implication of this study is that a contingency perspective needs to be adopted in the field of ‘distance’ research, taking account of factors such as a firm’s sector, and that this will require a more complex analytical framework that hitherto.